Claude Sonnet 5.5 vs GPT-6.1 Sol
언제 어떤 모델을 쓸까
두 모델은 가격이 완전히 같습니다. 입력 100만 토큰당 $2, 출력 100만당 $10, 캐시 읽기 100만당 $0.1이며, 최대 출력도 128000으로 같고 컨텍스트 윈도우도 거의 같습니다(claude-sonnet-5-5는 1000000, gpt-6.1-sol은 1050000). 둘 다 텍스트와 이미지를 입력받아 텍스트를 반환합니다. 차이는 작습니다. 더 늦은 2026-06 지식 컷오프가 필요하면 claude-sonnet-5-5를, 조금 더 큰 윈도우가 필요하면 gpt-6.1-sol을 선택하세요. 둘 다 thinking을 완전히 끌 수는 없습니다.
벤치마크
GPT-6.1 Sol: 공급자가 벤치마크 점수를 공개하지 않았습니다.
Claude Sonnet 5.5: 10개가 공개됐지만, 비교할 수 있을 만큼 여러 모델이 함께 측정한 벤치마크가 없습니다.
공급자 공개 자료: Google
가격
| Claude Sonnet 5.5 | GPT-6.1 Sol | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $2 | $2 | = |
| 출력 / 1M 토큰 | $10 | $10 | = |
| 캐시 읽기 / 1M 토큰 | $0.1 | $0.1 | = |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | 1.25x (30m) / 2.5x (12h) | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다. 기본 표에는 기본 요금이 표시됩니다. 프롬프트 길이에 따라 요청 전체 요금이 달라질 수 있습니다. 전체 요금은 각 모델 페이지에서 확인하세요.
GPT-6.1 Sol · 입력 길이별 요금
전체 요청에 입력 길이 구간의 단가가 적용됩니다. 요금은 100만 토큰당 미국 달러입니다.
| 입력 토큰 수 | 입력 | 출력 | 사고 모드 입력 |
|---|---|---|---|
| 0 - 272,000 | $2 | $10 | - |
| 272,001 - 1,050,000 | $4 | $15 | - |
가격 위치: 이 과금 단위를 쓰는 채팅 모델 86개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| Claude Sonnet 5.5 | GPT-6.1 Sol | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 항상 켜짐 | 항상 켜짐 |
| 구조화된 출력 | 지원 | 지원 |
| 프롬프트 캐싱 | 명시적(접두사 직접 지정) | 암시적 + 명시적 |
| 캐시 수명 | 5m default, 1h option | at least 30m by default, 12h option on the Responses API |
| 최소 캐시 접두사 | 512 토큰 | 1,024 토큰 |
사양
| Claude Sonnet 5.5 | GPT-6.1 Sol | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-09-28 | 2026-09-29 |
| 지식 컷오프 | 2026-06 | 2026-04 |
| 컨텍스트 윈도우 | 1,000,000 | 1,050,000 |
| 최대 출력 | 128,000 | 128,000 |
| 사고 파라미터 | thinking.type | reasoning.effort |
| 허용 값 | thinking.type
| reasoning.effort
|
| 기본값 | adaptive, effort high | medium |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Sonnet 5.5 · GPT-6.1 Sol
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
Claude Sonnet 5.5 통과 · 3 sentences
Enabling reasoning makes the model "think" before it answers, and that internal thinking is generated as extra text (reasoning tokens) that we are billed for at the same rate as output tokens, even though users never see it. Output tokens also cost several times more than input tokens, so a single request that used to produce a short answer can now generate many times more billable text behind the scenes. Because our request volume and prompts didn't change, the doubling comes almost entirely from this hidden thinking, and we can bring it down by limiting reasoning effort, turning it off for simple tasks, and reserving it for the workloads where the accuracy gain justifies the cost.
출력 205 tok 지연 시간 3.6 s
GPT-6.1 Sol 통과 · 3 sentences
Enabling reasoning makes the model do more computational work before answering, and many providers bill the resulting reasoning tokens even though users never see them. That means the same number of requests can cost twice as much because each request consumes more billable tokens, even if the visible answers stay the same length. We should confirm the increase in our usage breakdown and reserve higher reasoning levels for tasks where the improvement justifies the added cost.
출력 144 tok (+54 사고) 지연 시간 6.6 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
Claude Sonnet 5.5 통과 · 8/8 cases
**The bug:** `cur` counts the number of *adjacent equal pairs* rather than the number of items in the run. A run of length k contains only k−1 such pairs, so every result is one too small. The counter also starts at 0 and the loop starts at index 1, so a single-element list never updates `best` and returns 0 instead of 1. (An empty list should return 0.) In addition, `cur` resets to 0 on a mismatch, when it should reset to 1, because the item at `xs[i]` begins a new run of length 1. The claim that it "misses runs ending at the last index" is really the same off-by-one: the final run is counted, but as one less than its true length. Because `best` is updated inside the loop on every extension, the last run isn't skipped. […]
출력 444 tok 지연 시간 6.7 s
GPT-6.1 Sol 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The original function counts equal adjacent pairs rather than items in a run: a run of length `n` has only `n - 1` equal pairs, so a single-element input returns `0`, and a run ending at the last index is also undercounted. It does process the last index, so the issue is not a missing final check. Initializing each nonempty run to `1` and updating `best` after every iteration correctly counts items, including singleton and trailing runs; empty inputs still return `0`.
출력 189 tok 지연 시간 6.3 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
Claude Sonnet 5.5 통과 · 5/5 fields, guidance null
Here is the extracted JSON: ```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on the choices: - **quarter**: The text says "September quarter" without specifying a fiscal year or Q-number, so I kept the wording as stated. - **revenue_usd_m**: The text gives "412" for the topline, with no currency or unit stated explicitly. I've taken it as 412 million USD per the field definition, but the text does not confirm that, and the figure is constant-currency. - **growth_pct**: "Eleven and change" means slightly above 11, so 11 is an approximation. The exact figure isn't given. - **guidance**: Guidance is withheld pending the Q4 close, so no guidance is stated, hence null.
출력 300 tok 지연 시간 3.5 s
GPT-6.1 Sol 통과 · 5/5 fields, guidance "Withheld pending the Q4 close"
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": null, "growth_pct": "eleven and change", "guidance": "Withheld pending the Q4 close" }
출력 345 tok (+285 사고) 지연 시간 10.2 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
Claude Sonnet 5.5 통과 · 122 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching** Your API gateway now caches prompts across every connected LLM provider, whether you route traffic to OpenAI, Anthropic, Google, or a self-hosted model. Here's how it works: the gateway fingerprints each prompt prefix, stores it centrally, and applies the right provider-specific caching mechanism automatically. When you switch providers or fail over during an outage, your cached context follows you. Early testing shows input token costs dropping by up to 70% on repeated system prompts and long documents, with latency improvements of 40% or more on cache hits. Tired of paying to send the same instructions thousands of times a day? Enable it with one configuration flag. Cache rules, TTLs, and per-team isolation are available in the dashboard today.
출력 266 tok 지연 시간 3.8 s
GPT-6.1 Sol 통과 · 120 words, 0 banned, 1 question
Introducing Cross-Provider Prompt Cache, a new API gateway feature that stores reusable prompts and manages caching across your supported AI providers. Why rebuild the same context every time your application switches models? With one configuration, teams can reuse shared instructions, standardize cache policies, and reduce repeated prompt processing wherever provider caching is available. The gateway handles provider-specific requirements while giving you clear visibility into cache hits, usage, and estimated savings. Set expiration windows, isolate cached content by project, and invalidate entries when prompts change. Your existing routing logic stays intact, so you can compare models without rebuilding your caching workflow. […]
출력 588 tok (+435 사고) 지연 시간 13.9 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-sonnet-5-5",
# model="gpt-6.1-sol", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-sonnet-5-5",
// model: "gpt-6.1-sol", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-sonnet-5-5",
# "model": "gpt-6.1-sol", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-sonnet-5-5",
// Model: "gpt-6.1-sol", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-sonnet-5-5")
// .model("gpt-6.1-sol") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
Claude Sonnet 5.5 vs GPT-6.1 Sol, 어느 쪽이 더 저렴한가요?
기본 표에는 기본 요금이 표시됩니다. 프롬프트 길이에 따라 요청 전체 요금이 달라질 수 있습니다. 전체 요금은 각 모델 페이지에서 확인하세요.
연동을 두 번 하지 않고도 Claude Sonnet 5.5 vs GPT-6.1 Sol A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
Claude Sonnet 5.5, GPT-6.1 Sol 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.