Claude Sonnet 5.5 vs Gemini 3.8 Flash
언제 어떤 모델을 쓸까
claude-sonnet-5-5는 gemini-3.8-flash보다 입력과 출력에서 토큰당 약 2.7x 비싸고(100만당 $2/$10 대 $0.75/$3.75), 캐시 읽기는 약 1.3x 비쌉니다($0.1 대 $0.075). 텍스트와 이미지 입력으로 긴 단일 응답이 필요하면 이 모델을 선택하세요. 출력은 최대 128,000 토큰이고 상대는 65,536입니다. 저렴한 대량 처리, 약간 더 큰 컨텍스트(1048576 대 1000000 토큰), 그리고 claude-sonnet-5-5가 받지 않는 오디오·비디오 입력이 필요하면 gemini-3.8-flash를 선택하세요.
벤치마크
Claude Sonnet 5.5: 공급자가 벤치마크 점수를 공개하지 않았습니다.
공급자 공개 자료: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Sonnet 5.5 | Gemini 3.8 Flash | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $2 | $0.75 | 2.7× |
| 출력 / 1M 토큰 | $10 | $3.75 | 2.7× |
| 캐시 읽기 / 1M 토큰 | $0.1 | $0.075 | 1.3× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | - | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 77개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| Claude Sonnet 5.5 | Gemini 3.8 Flash | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 항상 켜짐 | 지원(공급자가 조절 파라미터를 공개하지 않음) |
| 구조화된 출력 | 지원 | 지원 |
| 프롬프트 캐싱 | 명시적(접두사 직접 지정) | 암시적 + 명시적 |
| 캐시 수명 | 5m default, 1h option | 미공개 |
| 최소 캐시 접두사 | 1024 토큰 | 4096 토큰 |
사양
| Claude Sonnet 5.5 | Gemini 3.8 Flash | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 오디오 동영상 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-09-28 | 2026-09-02 |
| 지식 컷오프 | 2026-06 | 2026-03 |
| 컨텍스트 윈도우 | 1M | 1M |
| 최대 출력 | 128K | 66K |
| 사고 파라미터 | thinking.type | - |
| 허용 값 | thinking.type
| - |
| 기본값 | adaptive, effort high | - |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Sonnet 5.5 · Gemini 3.8 Flash
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
Claude Sonnet 5.5 통과 · 3 sentences
Enabling reasoning makes the model "think" before it answers, and that internal thinking is generated as extra text (reasoning tokens) that we are billed for at the same rate as output tokens, even though users never see it. Output tokens also cost several times more than input tokens, so a single request that used to produce a short answer can now generate many times more billable text behind the scenes. Because our request volume and prompts didn't change, the doubling comes almost entirely from this hidden thinking, and we can bring it down by limiting reasoning effort, turning it off for simple tasks, and reserving it for the workloads where the accuracy gain justifies the cost.
출력 205 tok 지연 시간 3.6 s
Gemini 3.8 Flash 통과 · 3 sentences
When we enabled reasoning, the model began generating hidden "thinking tokens" to work through logic step-by-step before producing a final answer. Because AI vendors bill for every single token processed—visible or not—this internal deliberation dramatically inflated our billable volume per query. In short, while our total number of user requests remained flat, the cost per transaction doubled to buy higher accuracy on complex tasks.
출력 705 tok (+624 사고) 지연 시간 6.4 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
Claude Sonnet 5.5 통과 · 8/8 cases
**The bug:** `cur` counts the number of *adjacent equal pairs* rather than the number of items in the run. A run of length k contains only k−1 such pairs, so every result is one too small. The counter also starts at 0 and the loop starts at index 1, so a single-element list never updates `best` and returns 0 instead of 1. (An empty list should return 0.) In addition, `cur` resets to 0 on a mismatch, when it should reset to 1, because the item at `xs[i]` begins a new run of length 1. The claim that it "misses runs ending at the last index" is really the same off-by-one: the final run is counted, but as one less than its true length. Because `best` is updated inside the loop on every extension, the last run isn't skipped. […]
출력 444 tok 지연 시간 6.7 s
Gemini 3.8 Flash 통과 · 8/8 cases
Here is the corrected function: ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` ### Explanation of the Bug The original function counted equal-neighbor transitions rather than the actual items making up each run. Because `cur` started at `0` (and was reset to `0` on mismatches), every run was undercounted by one: single-element lists returned `0` because the loop never executed, and any subsequent run—including those ending at the last index—recorded a count of $N - 1$ instead of $N$. The fix handles empty input upfront, initializes both `cur` and `best` to `1` (since any single element forms a run of length 1), and resets `cur` to `1` whenever a new run begins.
출력 1393 tok (+1149 사고) 지연 시간 10.1 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
Claude Sonnet 5.5 통과 · 5/5 fields, guidance null
Here is the extracted JSON: ```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on the choices: - **quarter**: The text says "September quarter" without specifying a fiscal year or Q-number, so I kept the wording as stated. - **revenue_usd_m**: The text gives "412" for the topline, with no currency or unit stated explicitly. I've taken it as 412 million USD per the field definition, but the text does not confirm that, and the figure is constant-currency. - **growth_pct**: "Eleven and change" means slightly above 11, so 11 is an approximation. The exact figure isn't given. - **guidance**: Guidance is withheld pending the Q4 close, so no guidance is stated, hence null.
출력 300 tok 지연 시간 3.5 s
Gemini 3.8 Flash 통과 · 5/5 fields, guidance null
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": null, "guidance": null } ```
출력 3989 tok (+3932 사고) 지연 시간 30.4 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
Claude Sonnet 5.5 통과 · 122 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching** Your API gateway now caches prompts across every connected LLM provider, whether you route traffic to OpenAI, Anthropic, Google, or a self-hosted model. Here's how it works: the gateway fingerprints each prompt prefix, stores it centrally, and applies the right provider-specific caching mechanism automatically. When you switch providers or fail over during an outage, your cached context follows you. Early testing shows input token costs dropping by up to 70% on repeated system prompts and long documents, with latency improvements of 40% or more on cache hits. Tired of paying to send the same instructions thousands of times a day? Enable it with one configuration flag. Cache rules, TTLs, and per-team isolation are available in the dashboard today.
출력 266 tok 지연 시간 3.8 s
Gemini 3.8 Flash 통과 · 120 words, 0 banned, 1 question
Why pay multiple model providers for the exact same output? Introducing Universal Prompt Cache, our latest API gateway capability engineered to cut compute expenses and drop inference latency. When your application makes a call, the gateway inspects a central memory layer before routing traffic to external LLMs. If an identical query was previously processed by OpenAI, Anthropic, or Mistral, our gateway returns that response immediately. This shared cache eliminates duplicate token fees and insulates your production apps from vendor rate limits or unexpected downtime. Developers can easily customize expiration settings, enforce strict data privacy controls, and configure invalidation logic across every endpoint. Stop wasting your budget on repeated queries. Enable prompt caching in your dashboard to accelerate your pipeline today.
출력 3833 tok (+3688 사고) 지연 시간 21.8 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-sonnet-5-5",
# model="gemini-3.8-flash", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-sonnet-5-5",
// model: "gemini-3.8-flash", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-sonnet-5-5",
# "model": "gemini-3.8-flash", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-sonnet-5-5",
// Model: "gemini-3.8-flash", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-sonnet-5-5")
// .model("gemini-3.8-flash") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
Claude Sonnet 5.5 vs Gemini 3.8 Flash, 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 Gemini 3.8 Flash 쪽이 더 저렴합니다($0.75 대 $2, 2.7배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 Claude Sonnet 5.5 vs Gemini 3.8 Flash A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
Claude Sonnet 5.5, Gemini 3.8 Flash 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.