Dola Seed 2.0 Lite vs GPT-6 Sol
何時用哪一個
Dola-Seed-2.0-lite 是較便宜的選項，每百萬輸入為 $0.25，輸出為 $2，而 gpt-6-sol 分別為 $2 與 $10（輸入便宜 8x，輸出便宜 5x），快取讀取為 $0.05 對比 $0.20，且它是兩者中唯一在文字和圖片外還接受音訊與影片輸入的模型，加上略高一些的 131072 最大輸出。當您需要其約 1,050,000 token 的脈絡長度而非 256000，或需要其推理與視覺能力旗標時，請選擇 gpt-6-sol；兩者皆允許停用思考，因此都不會將您鎖定在延伸推理中。
Benchmark 成績
廠商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
定價
| Dola Seed 2.0 Lite | GPT-6 Sol | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $0.25 | $2 | 0.13× |
| 輸出 / 1M tokens | $2 | $10 | 0.2× |
| 快取讀取 / 1M tokens | $0.05 | $0.2 | 0.25× |
| 快取寫入 | - | 不額外計費 | - |
費率取自建置時的即時目錄；各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下，所有 74 個 聊天 模型的 每 1M tokens 的輸入價格（對數尺度）
能力
| Dola Seed 2.0 Lite | GPT-6 Sol | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 可配置 | 可配置 |
| 結構化輸出 | 是 | 是 |
| 提示快取 | 隱式 + 顯式 | 隱式（自動） |
| 快取生命週期 | 未公開 | 5-10m, up to 1h |
| 最小快取前綴 | 1024 個 token | 1024 個 token |
規格
| Dola Seed 2.0 Lite | GPT-6 Sol | |
|---|---|---|
| 輸入模態 | 文字 影像 音訊 影片 | 文字 影像 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-02-14 | 2026-09-22 |
| 知識截止日期 | - | 2026-04 |
| 上下文視窗 | 256K | 1.1M |
| 最大輸出 | 131K | 128K |
| 思考參數 |
| reasoning.effort |
| 可接受的值 | thinking.type
reasoning_effort
| reasoning.effort
|
| 預設值 | enabled, with reasoning_effort medium | medium |
規格摘錄自各供應商的文件；供應商未發布的資料列會直接省略，而非自行推測。 完整來源： Dola Seed 2.0 Lite · GPT-6 Sol
單一提示詞，兩款模型 — 經由閘道測量
Dola Seed 2.0 Lite 通過 · 3 sentences
Enabling reasoning on our production LLM requires the model to run resource-intensive multi-step chain-of-thought inference for every customer-facing query, rather than the single-pass inference that powered our original non-reasoning deployment, and GPU compute—which makes up 90% of our total LLM bill—scales directly with the number of compute cycles each query consumes. Our cloud provider’s LLM billing model charges per million processed tokens, and reasoning workflows generate an average of 2.1x more hidden processing tokens (the intermediate problem-solving steps the model never surfaces to end users) that are still billable, pushing our total monthly token consumption just over double what it was prior to enabling the feature. […]
輸出 1306 tok (+1096 思考) 延遲 18.2 s
GPT-6 Sol 通過 · 3 sentences
Enabling reasoning made the model generate extra internal tokens to work through each request, and those tokens are billed even though users don’t see them. If request volume stayed roughly the same, more billed tokens per request could explain why the bill doubled. We should check the usage breakdown to confirm, then lower reasoning effort or limit it to tasks that need it.
輸出 188 tok (+111 思考) 延遲 5.0 s
指令遵循（恰好三句，可數）、受眾適配（面向 CFO 的語氣），以及下方 token 計量所暴露的隱藏思考計費缺口。
Dola Seed 2.0 Lite 通過 · 8/8 cases
### Corrected Function ```python def longest_run(xs): if not xs: # Handle empty input edge case return 0 best = cur = 1 # Base run length of 1 for any non-empty single element for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 # Reset run length for the new, different element return best ``` ### Bug Explanation (single paragraph) The original function’s core flaw was that it counted the number of consecutive equal adjacent element pairs, rather than the number of elements in the run itself, leading to all results being off by one, which caused both reported issues: a run of k equal elements only has k-1 consecutive matching pairs, so the original function’s maximum `best` value was always one less than the true element count of the longest run. […]
輸出 2620 tok (+2217 思考) 延遲 33.2 s
GPT-6 Sol 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The original `cur` counted matching *adjacent pairs*, not items, so every run was one too short—including a single-element input, which returned 0. Starting each run at 1 counts its first item, and updating `best` on every iteration ensures a run that reaches the last index is included.
輸出 206 tok (+59 思考) 延遲 5.9 s
修復是否真的正確（可執行）、解釋的資訊密度，以及在一個邊界明確的任務上的 token 效率。
Dola Seed 2.0 Lite 通過 · 5/5 fields, guidance "Formal guidance withheld pending Q4 clos"
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Formal guidance withheld pending Q4 close" }
輸出 1502 tok (+1439 思考) 延遲 20.2 s
GPT-6 Sol 通過 · 5/5 fields, guidance "Withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":null,"growth_pct":null,"guidance":"Withheld pending the Q4 close"}
輸出 227 tok (+185 思考) 延遲 5.2 s
schema 服從度（不臆造欄位）、幻覺壓力（guidance 明確被暫緩給出），以及結構化輸出路徑的差異。
Dola Seed 2.0 Lite 未命中 · 141 words, 0 banned, 1 question
Today we launch Cross-Provider Prompt Cache, a new feature for our Core API Gateway built to cut redundant AI costs and latency for teams routing requests across multiple LLM providers. Many development teams rotate between OpenAI, Anthropic, and Google Gemini to balance performance, cost, and capability, but identical prompts get reprocessed from scratch with every provider switch, wasting tokens and slowing response times. This feature stores validated prompt responses at the gateway layer, so repeat requests pull from cache regardless of which provider they route to, with configurable TTLs and built-in compliance with all major provider data policies. […]
輸出 1870 tok (+1695 思考) 延遲 23.1 s
GPT-6 Sol 通過 · 120 words, 0 banned, 1 question
Today, we’re introducing cross-provider prompt caching for our API gateway, helping teams reuse repeated prompt content when routing requests among supported AI providers. The gateway identifies eligible prompt prefixes, stores cache references, and applies them to subsequent requests where provider capabilities allow. Why send the same context again if it can be reused? With fewer duplicate input tokens, applications can reduce costs and improve latency without changing how developers call the gateway. Configure caching by route, monitor hit rates and savings in your dashboard, and keep existing provider fallback rules in place. Availability and cache behavior vary by provider, so the gateway reports eligibility and usage for each request. Get started today with our documentation and test your existing workloads.
輸出 586 tok (+443 思考) 延遲 7.7 s
約束服從度（字數預算、禁用詞表、唯一的那句問句）、文風指紋，以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點，相同的金鑰，相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="Dola-Seed-2.0-lite",
# model="gpt-6-sol", # 取消註解此行，並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "Dola-Seed-2.0-lite",
// model: "gpt-6-sol", // 取消註解此行，並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "Dola-Seed-2.0-lite",
# "model": "gpt-6-sol", # 取消註解此行，並註解上一行
"messages": [{"role": "user", "content": "Hello"}]
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "Dola-Seed-2.0-lite",
// Model: "gpt-6-sol", // 取消註解此行，並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("Dola-Seed-2.0-lite")
// .model("gpt-6-sol") // 取消註解此行，並註解上一行
.addUserMessage("Summarize this diff")
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
Dola Seed 2.0 Lite 和 GPT-6 Sol 哪個比較便宜？
Dola Seed 2.0 Lite 在 輸入 / 1m tokens 上較便宜（$0.25 對比 $2，相差 8.0×）。其他項目可能呈現相反結果 — 上表提供完整資訊，實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下，對 Dola Seed 2.0 Lite 和 GPT-6 Sol 進行 A/B 測試嗎？
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務，並使用同一把 API 金鑰 — 切換只需更改一行的模型字串，因此您可以將部分流量分別導向兩者並直接比較帳單。
Dola Seed 2.0 Lite 與 GPT-6 Sol 支援提示快取嗎？
是的 — 兩者的快取讀取費率皆低於其輸入費率，因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。