Claude Opus 5 vs Qwen3.7 Plus
언제 어떤 모델을 쓸까
둘 다 1000000 토큰 컨텍스트 창을 제공하고 텍스트·이미지 입력을 받아 텍스트를 내놓으므로 차이는 주로 가격과 형태입니다. claude-opus-5는 100만 토큰당 입력 $5, 출력 $25로 qwen3.7-plus의 $0.4와 $1.6의 약 12.5배, 15.6배이고 캐시 읽기는 $0.5 대 $0.08입니다. 명시적 사고 능력이나 한 번의 호출에서 최대 128000 출력 토큰이 필요하면 claude-opus-5를, 대량 작업이나 롱컨텍스트 작업, 또는 입력에 Opus가 받지 않는 동영상이 포함되면 qwen3.7-plus를 고르세요.
벤치마크
두 모델 모두 측정한 항목 6개.
공급자 공개 자료: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Opus 5 | Qwen3.7 Plus | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $5 | $0.4 | 13× |
| 출력 / 1M 토큰 | $25 | $1.6 | 16× |
| 캐시 읽기 / 1M 토큰 | $0.5 | $0.08 | 6.3× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | 1.25x | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 76개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| Claude Opus 5 | Qwen3.7 Plus | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 설정 가능 | 설정 가능 |
| 구조화된 출력 | 지원 | 지원 |
| 프롬프트 캐싱 | 명시적(접두사 직접 지정) | 암시적 + 명시적 |
| 캐시 수명 | 5m default, 1h option | explicit: 5m, reset on hit |
| 최소 캐시 접두사 | 1024 토큰 | 1024 토큰 |
사양
| Claude Opus 5 | Qwen3.7 Plus | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 동영상 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-07-24 | 2026-06-01 |
| 지식 컷오프 | 2026-05 | - |
| 컨텍스트 윈도우 | 1M | 1M |
| 최대 출력 | 128K | 66K |
| 사고 파라미터 |
|
|
| 허용 값 | thinking.type
effort
| enable_thinking
thinking_budget
preserve_thinking
|
| 기본값 | thinking on effort
| on the Qwen3.7 Plus series is hybrid thinking with thinking enabled by default, and preserve_thinking is off |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Opus 5 · Qwen3.7 Plus
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
Claude Opus 5 통과 · 3 sentences
When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.
출력 529 tok 지연 시간 9.0 s
Qwen3.7 Plus 통과 · 3 sentences
Enabling reasoning requires the model to generate extensive internal "thinking" tokens to process complex logic before delivering a final answer. Because our vendor charges us per token consumed, this hidden computational overhead effectively doubles our output volume for the exact same number of user requests. Consequently, our costs have doubled because we are now paying for the model's increased processing time to achieve higher-quality, more accurate results.
출력 1428 tok (+1345 사고) 지연 시간 25.2 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
Claude Opus 5 통과 · 8/8 cases
## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]
출력 1094 tok 지연 시간 16.1 s
Qwen3.7 Plus 통과 · 8/8 cases
## Fixed Code ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` ## Bug Explanation The function has two related bugs rooted in how it counts run lengths. First, `cur` is initialized to `0` and only incremented on matches, so it counts the number of *transitions* between equal elements rather than the total elements in the run—a run of N identical items only reaches `cur = N − 1`, undercounting by one. This also causes the single-element case to return `0`, since the loop never executes and `cur` never increments. […]
출력 2317 tok (+2005 사고) 지연 시간 40.5 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
Claude Opus 5 통과 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.
출력 539 tok 지연 시간 7.6 s
Qwen3.7 Plus 통과 · 5/5 fields, guidance null
{ "company": "Meridian Robotics", "quarter": "September", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null }
출력 1807 tok (+1750 사고) 지연 시간 31.6 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
Claude Opus 5 통과 · 123 words, 0 banned, 1 question
**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.
출력 1593 tok 지연 시간 19.1 s
Qwen3.7 Plus 통과 · 120 words, 0 banned, 1 question
Introducing PromptCache, our new API gateway feature designed to store and reuse prompts across multiple artificial intelligence providers. Have you ever noticed how repeatedly sending identical queries drains your budget and increases latency? PromptCache solves this by intelligently storing responses at the gateway level. When your application requests the same prompt from a different provider, the system instantly returns the cached result. This drastically reduces API costs and accelerates response times for your users. You can configure custom expiration times and set specific fallback rules for each vendor. You must stop paying twice for the exact same computation. Please upgrade your entire infrastructure today and experience much faster and cheaper integrations without changing a single line of your application code.
출력 4453 tok (+4312 사고) 지연 시간 76.8 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5",
# model="qwen3.7-plus", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5",
// model: "qwen3.7-plus", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5",
# "model": "qwen3.7-plus", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5",
// Model: "qwen3.7-plus", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5")
// .model("qwen3.7-plus") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
Claude Opus 5 vs Qwen3.7 Plus, 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 Qwen3.7 Plus 쪽이 더 저렴합니다($0.4 대 $5, 13배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 Claude Opus 5 vs Qwen3.7 Plus A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
Claude Opus 5, Qwen3.7 Plus 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.