Claude Opus 5 vs Claude Opus 5.5
언제 어떤 모델을 쓸까
이 두 Anthropic 모델은 일반적으로 결정을 내리는 기준이 되는 사실들에서 일치합니다: 둘 다 텍스트와 이미지를 입력받아 텍스트를 출력하고, 128000 최대 출력과 함께 1000000-token 컨텍스트를 제공하며, 동일한 채팅, 코드, thinking, 도구 및 추론 기능을 갖추고 있습니다. claude-opus-5-5는 더 최신 모델(출시일 2026-09-22, 컷오프 2026-06)이며 입력 $4 및 출력 $20로 $5 및 $25에 비해 더 저렴하고, 캐시 읽기 비용도 $0.5 대비 $0.2로 2.5배 적습니다. thinking을 꺼야 하는 경우에만 claude-opus-5를 선택하세요. 이 모델은 이를 허용하지만 claude-opus-5-5는 허용하지 않기 때문입니다. 그 외의 경우에는 5.5를 선택하세요.
벤치마크
양쪽 모두 측정된 9개.
벤더 공개: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Opus 5 | Claude Opus 5.5 | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $5 | $4 | 1.3× |
| 출력 / 1M 토큰 | $25 | $20 | 1.3× |
| 캐시 읽기 / 1M 토큰 | $0.5 | $0.2 | 2.5× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | 1.25x (5m) / 2x (1h) | - |
빌드 시점의 라이브 카탈로그 요금입니다. 각 모델 페이지에 현재 요금표가 표시됩니다.
현재 위치 - 이 청구 단위를 사용하는 모든 76개의 채팅 모델 전체의 1M 토큰당 입력 가격 (로그 스케일)
기능
| Claude Opus 5 | Claude Opus 5.5 | |
|---|---|---|
| 도구 사용 | 예 | 예 |
| 사고 제어 | 설정 가능 | 항상 켜짐 |
| 구조화된 출력 | 예 | 예 |
| 프롬프트 캐싱 | 명시적 (접두사 직접 지정) | 명시적 (접두사 직접 지정) |
| 캐시 수명 | 5m default, 1h option | 5m default, 1h option |
| 최소 캐시 접두사 | 1024 토큰 | 1024 토큰 |
사양
| Claude Opus 5 | Claude Opus 5.5 | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-07-24 | 2026-09-22 |
| 지식 컷오프 | 2026-05 | 2026-06 |
| 컨텍스트 윈도우 | 1M | 1M |
| 최대 출력 | 128K | 128K |
| Thinking 파라미터 |
| output_config.effort |
| 허용되는 값 | thinking.type
effort
| output_config.effort
|
| 기본값 | thinking on effort
| medium |
사양은 각 공급업체의 문서를 그대로 기록한 것입니다. 공급업체가 공개하지 않은 항목은 추론하지 않고 제외했습니다. 전체 출처: Claude Opus 5 · Claude Opus 5.5
하나의 프롬프트, 두 모델 - 게이트웨이를 통해 측정됨
Claude Opus 5 통과 · 3 sentences
When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.
출력 529 tok 지연 시간 9.0 s
Claude Opus 5.5 통과 · 3 sentences
When we turned on reasoning, the model began "thinking out loud" before each answer, generating thousands of internal working tokens that users never see but that we are billed for just like the final response. Those hidden tokens are charged at the output rate, typically the most expensive rate, so the same question with the same visible answer now costs roughly twice as much or more. We can bring the bill back down without losing the quality gains by capping the reasoning budget and reserving reasoning mode for the complex tasks that actually benefit from it.
출력 263 tok (+102 추론) 지연 시간 5.7 s
지시 준수(정확히 세 문장 - 셀 수 있음), 독자 맞춤(CFO 어조), 그리고 아래 토큰 계량기가 드러내는 숨은 사고 과금 격차.
Claude Opus 5 통과 · 8/8 cases
## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]
출력 1094 tok 지연 시간 16.1 s
Claude Opus 5.5 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` **Explanation:** The original code counted *matching adjacent pairs* rather than *items in a run*. Both `cur` and `best` started at 0, and `cur` reset to 0 on a mismatch, so a run of length *n* was reported as *n − 1*. For a single-element list the loop never executes, so it returned 0 instead of 1. For `[5, 5]` it returned 1 instead of 2. The fix treats every element as the start of a run of length 1: `best` and `cur` start at 1, and `cur` resets to 1 (not 0) when the value changes. An explicit check returns 0 for an empty list. The "misses runs at the last index" reports are the same off-by-one bug rather than a separate one. […]
출력 723 tok (+303 추론) 지연 시간 10.4 s
수정이 실제로 옳은지(실행 가능한지), 설명의 밀도, 그리고 범위가 정해진 작업에서의 토큰 효율.
Claude Opus 5 통과 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.
출력 539 tok 지연 시간 7.6 s
Claude Opus 5.5 통과 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` **Judgment calls to check:** - **quarter**: Kept as "September quarter" rather than "Q3", since the fiscal calendar isn't stated. The text mentions an upcoming "Q4 close," so it may be fiscal Q3, but that's not certain. - **revenue_usd_m**: The text says only "412 for the topline." It doesn't state currency or units, and the figure is on a constant-currency basis, not reported USD. USD millions is an assumption. Use `null` if you need strictly stated values. - **growth_pct**: The source says "eleven and change," so the true figure is slightly above 11. 11 is an approximation. - **guidance**: Guidance was explicitly withheld. I recorded that rather than `null`, since the text addresses it directly.
출력 829 tok (+488 추론) 지연 시간 10.9 s
스키마 준수(없는 필드를 지어내지 않기), 환각 압력(guidance는 명시적으로 보류됨), 그리고 구조화 출력 경로의 차이.
Claude Opus 5 통과 · 123 words, 0 banned, 1 question
**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.
출력 1593 tok 지연 시간 19.1 s
Claude Opus 5.5 통과 · 120 words, 0 banned, 1 question
Today we're launching Cross-Provider Prompt Caching for our API gateway. Why pay twice for the same context? Our gateway now stores repeated prompt prefixes, system instructions, and document chunks, then reuses them whether your request goes to OpenAI, Anthropic, Google, or an open-source model. Teams running retrieval pipelines or long agent loops can cut token costs by up to 60 percent and trim latency on every cached call. Setup takes one configuration flag; no code changes are required. Cache rules respect tenant boundaries, expire on your schedule, and log every hit for audit review. Dashboards show savings by provider, route, and application in real time. Cross-Provider Prompt Caching is available on all Pro and Enterprise plans. Turn it on today.
출력 1263 tok (+1007 추론) 지연 시간 13.5 s
제약 준수(단어 예산, 금지어 목록, 단 하나의 의문문), 문체 지문, 그리고 길이 제어.
코드 한 줄로 모델 전환
두 id는 아래의 모든 탭에 있습니다 - 강조 표시된 두 줄이 유일한 수정 사항입니다. 동일한 엔드포인트, 동일한 키, 동일한 요청 형태입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5",
# model="claude-opus-5-5", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5",
// model: "claude-opus-5-5", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5",
# "model": "claude-opus-5-5", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5",
// Model: "claude-opus-5-5", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5")
// .model("claude-opus-5-5") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));FAQ
Claude Opus 5와(과) Claude Opus 5.5 중 어느 것이 더 저렴한가요?
입력 / 1m 토큰 항목에서는 Claude Opus 5.5이(가) 더 저렴합니다($4 대 $5, 1.3× 차이). 다른 항목에서는 결과가 다를 수 있습니다 - 위의 표에 전체 정보가 있으며, 실제 비용은 사용 조합에 따라 달라집니다.
두 번의 연동 과정 없이 Claude Opus 5와(과) Claude Opus 5.5를 A/B 테스트할 수 있나요?
네. 둘 다 하나의 API 키를 사용하여 동일한 OpenAI 호환 엔드포인트를 통해 제공됩니다 - 모델 문자열을 한 줄만 변경하면 전환되므로, 트래픽의 일부를 각각 라우팅하여 요금을 직접 비교할 수 있습니다.
Claude Opus 5 및 Claude Opus 5.5는 프롬프트 캐싱을 지원하나요?
네 - 두 모델 모두 캐시 읽기에 대해 입력 요금보다 낮게 청구하므로, 웜 프리픽스 워크로드는 공시된 요금보다 비용이 적게 듭니다. 정확한 캐시 읽기 행은 위의 가격표에 있습니다.