Claude Opus 5 vs GLM-5
언제 어떤 모델을 쓸까
claude-opus-5는 텍스트뿐 아니라 이미지 입력도 받고 1,000,000 토큰 컨텍스트 창을 가져 glm-5의 200000의 다섯 배이므로, 이미지가 있는 프롬프트나 저장소 전체 컨텍스트에는 claude-opus-5를 고르세요. glm-5는 텍스트 전용이지만 훨씬 저렴합니다. 입력 약 5배($1 대 $5), 출력 7.8배($3.2 대 $25) 저렴하고 캐시 읽기는 $0.2 대 $0.5이며 최대 출력은 131072 토큰으로 약간 큽니다(대 128000). 둘 다 사고를 끌 수 있습니다. 200000 토큰에 들어가는 대량 텍스트·코드·도구 작업에는 glm-5를 고르세요.
벤치마크
벤더 공개: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Opus 5 | GLM-5 | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $5 | $1 | 5× |
| 출력 / 1M 토큰 | $25 | $3.2 | 7.8× |
| 캐시 읽기 / 1M 토큰 | $0.5 | $0.2 | 2.5× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | - | - |
빌드 시점의 라이브 카탈로그 요금입니다. 각 모델 페이지에 현재 요금표가 표시됩니다.
현재 위치 - 이 청구 단위를 사용하는 모든 64개의 채팅 모델 전체의 1M 토큰당 입력 가격 (로그 스케일)
기능
| Claude Opus 5 | GLM-5 | |
|---|---|---|
| 도구 사용 | 예 | 예 |
| 사고 제어 | 설정 가능 | 설정 가능 |
| 구조화된 출력 | 예 | 예 |
| 프롬프트 캐싱 | 명시적 (접두사 직접 지정) | 암시적 (자동) |
| 캐시 수명 | 5m default, 1h option | 미공개 |
| 최소 캐시 접두사 | 1024 토큰 | 미공개 |
사양
| Claude Opus 5 | GLM-5 | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-07-24 | 2026-02-12 |
| 지식 컷오프 | 2026-05 | - |
| 컨텍스트 윈도우 | 1M | 200K |
| 최대 출력 | 128K | 131K |
| Thinking 파라미터 |
| thinking.type |
| 허용되는 값 | thinking.type
effort
| thinking.type
|
| 기본값 | thinking on effort
| enabled, and on GLM-5 the model automatically determines whether to think |
사양은 각 공급업체의 문서를 그대로 기록한 것입니다. 공급업체가 공개하지 않은 항목은 추론하지 않고 제외했습니다. 전체 출처: Claude Opus 5 · GLM-5
하나의 프롬프트, 두 모델 - 게이트웨이를 통해 측정됨
Claude Opus 5 통과 · 3 sentences
When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.
출력 529 tok 지연 시간 9.0 s
GLM-5 통과 · 3 sentences
Enabling reasoning forces the model to perform multiple hidden steps to "think" through a problem, drastically increasing the volume of data processed per query compared to a standard response. Because our billing is directly tied to this processing volume, the additional computational work required for higher accuracy has proportionally doubled our consumption. Essentially, the spike reflects a trade-off where we are paying a higher variable cost to secure significantly better analytical outcomes.
출력 1393 tok (+1308 추론) 지연 시간 36.0 s
지시 준수(정확히 세 문장 - 셀 수 있음), 독자 맞춤(CFO 어조), 그리고 아래 토큰 계량기가 드러내는 숨은 사고 과금 격차.
Claude Opus 5 통과 · 8/8 cases
## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]
출력 1094 tok 지연 시간 16.1 s
GLM-5 통과 · 8/8 cases
Here is the fixed code: ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` **Explanation:** The bug stems from initializing `best` and `cur` to zero, which causes the function to count the number of *transitions* between adjacent elements rather than the total number of items in the run, resulting in a return value that is always one less than the actual length (reporting 0 for a single element and 1 for a pair). By initializing the counters to 1 and resetting `cur` to 1 when a streak breaks, the logic correctly counts the items themselves; adding an explicit check for an empty list ensures the function handles the zero-element edge case correctly.
출력 2907 tok (+2694 추론) 지연 시간 73.7 s
수정이 실제로 옳은지(실행 가능한지), 설명의 밀도, 그리고 범위가 정해진 작업에서의 토큰 효율.
Claude Opus 5 통과 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.
출력 539 tok 지연 시간 7.6 s
GLM-5 통과 · 5/5 fields, guidance "withheld pending the Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "withheld pending the Q4 close" } ```
출력 3620 tok (+3561 추론) 지연 시간 91.8 s
스키마 준수(없는 필드를 지어내지 않기), 환각 압력(guidance는 명시적으로 보류됨), 그리고 구조화 출력 경로의 차이.
Claude Opus 5 통과 · 123 words, 0 banned, 1 question
**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.
출력 1593 tok 지연 시간 19.1 s
GLM-5 통과 · 119 words, 0 banned, 1 question
We are thrilled to introduce Global Prompt Caching, a powerful new capability within our API gateway designed to optimize your AI operations. By intelligently storing prompt responses across every supported provider, this feature drastically reduces latency and cuts operational costs. Instead of processing identical requests repeatedly, our system serves cached results instantly, ensuring consistent performance even during high-traffic periods. Why pay full price for repeated inference on the same inputs? This update gives developers fine-grained control over cache lifetimes and hit rates, allowing for predictable budgeting and faster application response times. You can activate this functionality directly in your dashboard settings today. Start maximizing your efficiency now and deliver a snappier experience to your end-users without unnecessary API expenditure.
출력 715 tok (+571 추론) 지연 시간 18.9 s
제약 준수(단어 예산, 금지어 목록, 단 하나의 의문문), 문체 지문, 그리고 길이 제어.
코드 한 줄로 모델 전환
두 id는 아래의 모든 탭에 있습니다 - 강조 표시된 두 줄이 유일한 수정 사항입니다. 동일한 엔드포인트, 동일한 키, 동일한 요청 형태입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5",
# model="glm-5", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5",
// model: "glm-5", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5",
# "model": "glm-5", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5",
// Model: "glm-5", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5")
// .model("glm-5") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));FAQ
Claude Opus 5와(과) GLM-5 중 어느 것이 더 저렴한가요?
입력 / 1m 토큰 항목에서는 GLM-5이(가) 더 저렴합니다($1 대 $5, 5.0× 차이). 다른 항목에서는 결과가 다를 수 있습니다 - 위의 표에 전체 정보가 있으며, 실제 비용은 사용 조합에 따라 달라집니다.
두 번의 연동 과정 없이 Claude Opus 5와(과) GLM-5를 A/B 테스트할 수 있나요?
네. 둘 다 하나의 API 키를 사용하여 동일한 OpenAI 호환 엔드포인트를 통해 제공됩니다 - 모델 문자열을 한 줄만 변경하면 전환되므로, 트래픽의 일부를 각각 라우팅하여 요금을 직접 비교할 수 있습니다.
Claude Opus 5 및 GLM-5는 프롬프트 캐싱을 지원하나요?
네 - 두 모델 모두 캐시 읽기에 대해 입력 요금보다 낮게 청구하므로, 웜 프리픽스 워크로드는 공시된 요금보다 비용이 적게 듭니다. 정확한 캐시 읽기 행은 위의 가격표에 있습니다.