Claude Fable 5 vs Claude Opus 5
Claude Fable 5 모델은 Synthorai 카탈로그에서 서비스가 종료되었습니다. 아래 수치는 마지막으로 공개된 요금이며, 이 모델은 더 이상 호출할 수 없습니다. 비교 대상인 다른 모델은 계속 호출할 수 있습니다.
언제 어떤 모델을 쓸까
Anthropic 자체의 갈림길: 끄는 것이 가능한 적응형 사고를 제공하는 $5/$25의 Opus 5, 사고가 구조적이며 항상 활성화된 $10/$50의 Fable 5. 간단한 호출에서 숙고를 비활성화하는 것이 워크로드에 유리하다면 Opus 5가 절반 가격에 해당 제어를 지원합니다. Fable 5는 모델이 사고 과정을 건너뛰기를 원치 않는 작업에 적합합니다.
벤치마크
두 모델 모두 측정한 항목 30개.
공급자 공개 자료: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Fable 5 | Claude Opus 5 | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $10 | $5 | 2× |
| 출력 / 1M 토큰 | $50 | $25 | 2× |
| 캐시 읽기 / 1M 토큰 | $1 | $0.5 | 2× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | 1.25x (5m) / 2x (1h) | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 76개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| Claude Fable 5 | Claude Opus 5 | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 항상 켜짐 | 설정 가능 |
| 구조화된 출력 | 지원 | 지원 |
| 프롬프트 캐싱 | 명시적(접두사 직접 지정) | 명시적(접두사 직접 지정) |
| 캐시 수명 | 5m default, 1h option | 5m default, 1h option |
| 최소 캐시 접두사 | 1024 토큰 | 1024 토큰 |
사양
| Claude Fable 5 | Claude Opus 5 | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-06-09 | 2026-07-24 |
| 지식 컷오프 | 2026-01 | 2026-05 |
| 컨텍스트 윈도우 | 1M | 1M |
| 최대 출력 | 128K | 128K |
| 사고 파라미터 | output_config.effort (thinking.type is adaptive-only and needs no configuration) |
|
| 허용 값 | effort
both "enabled" and "disabled" return 400 | thinking.type
effort
|
| 기본값 | thinking always on (adaptive) effort
| thinking on effort
|
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Fable 5 · Claude Opus 5
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
Claude Fable 5 통과 · 3 sentences
When we enabled reasoning, the model began generating extensive internal "thinking" tokens before each answer, and those tokens are billed as output even though users never see them. Output tokens typically cost several times more than input tokens, so adding thousands of hidden reasoning tokens per request effectively multiplied our per-query cost. In short, we're paying for a much longer response behind the scenes in exchange for higher answer quality, and we can manage this by tuning reasoning effort levels or reserving reasoning mode for complex tasks only.
출력 228 tok 지연 시간 6.7 s
Claude Opus 5 통과 · 3 sentences
When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.
출력 529 tok 지연 시간 9.0 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
Claude Fable 5 통과 · 8/8 cases
## Fixed code ```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` ## Explanation The original function counts **adjacent equal pairs** rather than **items in a run**: a run of length *n* contains only *n − 1* equal neighbor pairs, so every result is off by one — a single-element list yields 0 instead of 1, and `[1, 2, 2]` yields 1 instead of 2 (which callers perceive as "missing" the run at the end). The fix is to initialize both `cur` and `best` to 1 (any nonempty list has a run of at least length 1), reset `cur` to 1 rather than 0 when
출력 531 tok 지연 시간 12.5 s
Claude Opus 5 통과 · 8/8 cases
## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]
출력 1094 tok 지연 시간 16.1 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
Claude Fable 5 통과 · 5/5 fields, guidance null
```json { "company": "Meridian Robotics", "quarter": "Q3 (September quarter)", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on interpretation: "up eleven and change" is rendered as 11 (the precise figure isn't stated), and guidance is null because it was explicitly withheld.
출력 192 tok 지연 시간 6.5 s
Claude Opus 5 통과 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.
출력 539 tok 지연 시간 7.6 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
Claude Fable 5 통과 · 120 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching for our API Gateway** Starting today, your repeated prompts are cached once and reused across OpenAI, Anthropic, Google, and any other provider you route through the gateway. Instead of paying full token costs every time your application sends the same system prompt or context block, the gateway detects matching prefixes and serves cached results in milliseconds. Why keep spending money and latency on identical requests? Early adopters report cost reductions of up to 60 percent on high-volume workloads, along with faster median response times. Configuration is simple: enable caching in your dashboard, set a TTL, and choose which routes participate. Cache entries are encrypted at rest and never shared between accounts. Available now on all plans.
출력 1173 tok 지연 시간 18.2 s
Claude Opus 5 통과 · 123 words, 0 banned, 1 question
**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.
출력 1593 tok 지연 시간 19.1 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-fable-5",
# model="claude-opus-5", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-fable-5",
// model: "claude-opus-5", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-fable-5",
# "model": "claude-opus-5", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-fable-5",
// Model: "claude-opus-5", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-fable-5")
// .model("claude-opus-5") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
Claude Fable 5 vs Claude Opus 5, 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 Claude Opus 5 쪽이 더 저렴합니다($5 대 $10, 2.0배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 Claude Fable 5 vs Claude Opus 5 A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
Claude Fable 5, Claude Opus 5 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.