Claude Sonnet 5.5 vs Qwen3.8 Max
何时用哪一个
这两者在纸面上的定位几乎相同:均接受文本和图像输入,返回文本,输入费用均为每百万 token $2,并且都提供接近一百万 token 的上下文(claude-sonnet-5-5 为 1000000,而 qwen3.8-max 为 983616)。区别在于输出端,qwen3.8-max 每百万 token 收费 $6,相比于 $10 便宜了约 1.67x,且每次响应提供略多一点的空间,为 131072 token。选择 claude-sonnet-5-5 以获得 Anthropic 较新的 2026-09-28 发布版本以及略微更便宜的 $0.2 缓存读取费用;选择 qwen3.8-max 以应对输出密集型工作。
Benchmark 成绩
Claude Sonnet 5.5:厂商没有公布过 benchmark 成绩。
厂商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
定价
| Claude Sonnet 5.5 | Qwen3.8 Max | Δ | |
|---|---|---|---|
| 输入 / 1M tokens | $2 | $2 | = |
| 输出 / 1M tokens | $10 | $6 | 1.7× |
| 缓存读取 / 1M tokens | $0.2 | $0.25 | 0.8× |
| 缓存写入 | 1.25x (5m) / 2x (1h) | 1.25x | - |
费率取自构建时的实时目录;每个模型页面均附有当前的费率卡。
它们的位置 — 以该计费单位计费的所有 76 个 聊天 模型的 每 1M token 的输入价格(对数刻度)
能力
| Claude Sonnet 5.5 | Qwen3.8 Max | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 始终开启 | 是 —— 厂商未公布调节参数 |
| 结构化输出 | 是 | 是 |
| 提示词缓存 | 显式(由您标记前缀) | 隐式 + 显式 |
| 缓存生存时间 | 5m default, 1h option | explicit: 5m, reset on hit |
| 最小缓存前缀 | 1024 个 token | 1024 个 token |
规格
| Claude Sonnet 5.5 | Qwen3.8 Max | |
|---|---|---|
| 输入模态 | 文本 图像 | 文本 图像 |
| 输出模态 | 文本 | 文本 |
| 发布日期 | 2026-09-28 | 2026-08-03 |
| 知识截止日期 | 2026-06 | - |
| 上下文窗口 | 1M | 984K |
| 最大输出 | 128K | 131K |
| 思考参数 | thinking.type | - |
| 允许的值 | thinking.type
| - |
| 默认值 | adaptive, effort high | - |
规格转录自各供应商的文档;若供应商未发布某项数据,则直接省略该行,而非进行推断。 完整来源: Claude Sonnet 5.5 · Qwen3.8 Max
单个 Prompt,两个模型 —— 通过网关实测
Claude Sonnet 5.5 通过 · 3 sentences
Enabling reasoning makes the model "think" before it answers, and that internal thinking is generated as extra text (reasoning tokens) that we are billed for at the same rate as output tokens, even though users never see it. Output tokens also cost several times more than input tokens, so a single request that used to produce a short answer can now generate many times more billable text behind the scenes. Because our request volume and prompts didn't change, the doubling comes almost entirely from this hidden thinking, and we can bring it down by limiting reasoning effort, turning it off for simple tasks, and reserving it for the workloads where the accuracy gain justifies the cost.
输出 205 tok 延迟 3.6 s
Qwen3.8 Max 通过 · 3 sentences
Enabling reasoning makes the model produce additional hidden steps before responding, and those tokens are billable. It also tends to lengthen each interaction because the model works through more possibilities before settling on an answer. Therefore, the bill doubled mainly due to higher compute and token usage per request, not necessarily because the number of requests doubled.
输出 378 tok (+305 思考) 延迟 8.6 s
指令遵循(恰好三句,可数)、受众适配(面向 CFO 的语气),以及下方 token 计量所暴露的隐藏思考计费缺口。
Claude Sonnet 5.5 通过 · 8/8 cases
**The bug:** `cur` counts the number of *adjacent equal pairs* rather than the number of items in the run. A run of length k contains only k−1 such pairs, so every result is one too small. The counter also starts at 0 and the loop starts at index 1, so a single-element list never updates `best` and returns 0 instead of 1. (An empty list should return 0.) In addition, `cur` resets to 0 on a mismatch, when it should reset to 1, because the item at `xs[i]` begins a new run of length 1. The claim that it "misses runs ending at the last index" is really the same off-by-one: the final run is counted, but as one less than its true length. Because `best` is updated inside the loop on every extension, the last run isn't skipped. […]
输出 444 tok 延迟 6.7 s
Qwen3.8 Max 通过 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that the original code starts `best` and `cur` at `0`, so it counts adjacent equal *transitions* rather than the number of items in the run. A run of length `n` has only `n - 1` equal-neighbor transitions, so single-element inputs return `0`, and runs that reach the end are undercounted by one. Initializing the current run to `1` for the first element, resetting it to `1` on a break, and updating `best` from that count fixes the off-by-one.
输出 1616 tok (+1411 思考) 延迟 34.7 s
修复是否真的正确(可运行)、解释的信息密度,以及在一个边界明确的任务上的 token 效率。
Claude Sonnet 5.5 通过 · 5/5 fields, guidance null
Here is the extracted JSON: ```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on the choices: - **quarter**: The text says "September quarter" without specifying a fiscal year or Q-number, so I kept the wording as stated. - **revenue_usd_m**: The text gives "412" for the topline, with no currency or unit stated explicitly. I've taken it as 412 million USD per the field definition, but the text does not confirm that, and the figure is constant-currency. - **growth_pct**: "Eleven and change" means slightly above 11, so 11 is an approximation. The exact figure isn't given. - **guidance**: Guidance is withheld pending the Q4 close, so no guidance is stated, hence null.
输出 300 tok 延迟 3.5 s
Qwen3.8 Max 通过 · 5/5 fields, guidance null
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null }
输出 1199 tok (+1141 思考) 延迟 24.4 s
schema 服从度(不臆造字段)、幻觉压力(guidance 明确被暂缓给出),以及结构化输出路径的差异。
Claude Sonnet 5.5 通过 · 122 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching** Your API gateway now caches prompts across every connected LLM provider, whether you route traffic to OpenAI, Anthropic, Google, or a self-hosted model. Here's how it works: the gateway fingerprints each prompt prefix, stores it centrally, and applies the right provider-specific caching mechanism automatically. When you switch providers or fail over during an outage, your cached context follows you. Early testing shows input token costs dropping by up to 70% on repeated system prompts and long documents, with latency improvements of 40% or more on cache hits. Tired of paying to send the same instructions thousands of times a day? Enable it with one configuration flag. Cache rules, TTLs, and per-team isolation are available in the dashboard today.
输出 266 tok 延迟 3.8 s
Qwen3.8 Max 通过 · 120 words, 0 banned, 1 question
Today, our API gateway adds prompt caching across major model providers. It stores prompts and responses in one fast cache layer. Teams can lower token spend, reduce latency, and repeat reliable answers. The feature supports OpenAI, Anthropic, Google, and Mistral through one configuration. You can set retention rules, scope access, and invalidate entries quickly. How does your team maintain consistent results during provider outages? Approved cached responses keep applications stable while fallback routes recover. The dashboard shows hit rates, savings, latency, and provider usage. Engineers receive audit trails for every cached prompt, enabling safer testing. Product managers can compare cost trends before and after cache adoption. Start with a small route, then safely expand caching to production traffic right now.
输出 2744 tok (+2591 思考) 延迟 46.3 s
约束服从度(字数预算、禁用词表、唯一的那句问句)、文风指纹,以及长度控制。
只需一行代码即可在它们之间切换
两个 ID 都包含在下方的每个选项卡中 — 高亮显示的两行是唯一的修改。相同的端点,相同的密钥,相同的请求结构。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-sonnet-5-5",
# model="qwen3.8-max", # 取消注释此行,注释上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-sonnet-5-5",
// model: "qwen3.8-max", // 取消注释此行,注释上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-sonnet-5-5",
# "model": "qwen3.8-max", # 取消注释此行,注释上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-sonnet-5-5",
// Model: "qwen3.8-max", // 取消注释此行,注释上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-sonnet-5-5")
// .model("qwen3.8-max") // 取消注释此行,注释上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常见问题
Claude Sonnet 5.5 和 Qwen3.8 Max 哪个更便宜?
它们列出的 输入 / 1m tokens 相同($2),因此价格不是这一项的决定因素——请参考下文的规格与能力。
我可以在不进行两次集成的情况下,对 Claude Sonnet 5.5 和 Qwen3.8 Max 进行 A/B 测试吗?
可以。两者均通过同一个兼容 OpenAI 的端点提供服务,并使用同一把 API 密钥——切换只需更改一行模型字符串,因此你可以将一部分流量路由到各个模型并直接比较账单。
Claude Sonnet 5.5 和 Qwen3.8 Max 支持提示词缓存吗?
是的 —— 两者对缓存读取的计费均低于其输入费率,因此热前缀工作负载的成本低于标价。准确的缓存读取行位于上方的定价表中。