Claude Opus 5 vs GPT-5.6 Sol
什么时候选哪个
这两者非常接近:都接受文本和图像输入、返回文本、最大输出 128000 token,且每百万输入 token 都收 $5、缓存读取 $0.5,所以差别在输出侧——claude-opus-5 每百万 $25,对比 gpt-5.6-sol 的 $30,生成 token 上相差 1.2 倍。长而输出密集的推理工作选 claude-opus-5,它明确的思考能力和更晚的 2026-05 知识截止有帮助;想要略大的 1050000 token 上下文或它声明的视觉处理则选 gpt-5.6-sol。两者都能关闭思考。
Benchmark 成绩
45 项两边都有成绩,其中 1 项打平。
供应商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
价格
| Claude Opus 5 | GPT-5.6 Sol | Δ | |
|---|---|---|---|
| 输入 / 1M token | $5 | $5 | = |
| 输出 / 1M token | $25 | $30 | 0.83× |
| 缓存读取 / 1M token | $0.5 | $0.5 | = |
| 缓存写入 | 1.25x (5m) / 2x (1h) | 不单独收费 | - |
价格取自构建时的实时目录,最新价格见各模型页面。
两个模型所处的位置:全部 76 个按同一单位计费的聊天模型的每 1M token 输入价分布(对数刻度)
能力
| Claude Opus 5 | GPT-5.6 Sol | |
|---|---|---|
| 工具调用 | 是 | 是 |
| 思考控制 | 可配置 | 可配置 |
| 结构化输出 | 是 | 是 |
| 提示词缓存 | 显式(由你标记前缀) | 隐式(自动) |
| 缓存有效期 | 5m default, 1h option | 5-10m, up to 1h |
| 最小缓存前缀 | 1024 个 token | 1024 个 token |
规格
| Claude Opus 5 | GPT-5.6 Sol | |
|---|---|---|
| 输入模态 | 文本 图像 | 文本 图像 |
| 输出模态 | 文本 | 文本 |
| 发布日期 | 2026-07-24 | 2026-07-09 |
| 知识截止日期 | 2026-05 | 2026-02 |
| 上下文窗口 | 1M | 1.1M |
| 最大输出 | 128K | 128K |
| 思考参数 |
| reasoning.effort |
| 可选值 | thinking.type
effort
| reasoning.effort
|
| 默认值 | thinking on effort
| medium |
规格照录自各供应商的文档;供应商没有公布的项目,对应的行直接省略,不做推断。 完整来源: Claude Opus 5 · GPT-5.6 Sol
同一条提示词,两个模型,经网关实测
Claude Opus 5 通过 · 3 sentences
When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.
输出 529 tok 延迟 9.0 s
GPT-5.6 Sol 通过 · 3 sentences
Enabling reasoning makes the model generate additional internal tokens before producing an answer, so each request consumes more billable compute. Reasoning may also increase response length, latency, tool calls, and retries, further raising per-request cost. In short, usage volume may be unchanged, but the cost per task increased enough to double the bill.
输出 111 tok (+34 思考) 延迟 2.3 s
指令遵循(恰好三句,数得出来)、受众适配(对 CFO 说话的口吻),以及下方 token 计数暴露出的隐藏思考计费差额。
Claude Opus 5 通过 · 8/8 cases
## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]
输出 1094 tok 延迟 16.1 s
GPT-5.6 Sol 通过 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The original function counted equal *adjacencies* rather than items, so a run of length one produced `0` and every longer run was undercounted by one. Initializing `cur` and `best` to `1` for nonempty input makes them represent item counts, resetting `cur` to `1` starts a new run at the current item, and updating `best` on every iteration ensures a run reaching the final index is included.
输出 316 tok (+135 思考) 延迟 5.2 s
修复是否真的正确(能运行)、解释的信息密度,以及在一个范围明确的任务上的 token 效率。
Claude Opus 5 通过 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.
输出 539 tok 延迟 7.6 s
GPT-5.6 Sol 通过 · 5/5 fields, guidance "withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":"11+","guidance":"withheld pending the Q4 close"}
输出 194 tok (+147 思考) 延迟 3.2 s
是否严守 schema(不臆造字段)、能否顶住幻觉压力(原文明说暂不给出 guidance),以及结构化输出路径的差异。
Claude Opus 5 通过 · 123 words, 0 banned, 1 question
**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.
输出 1593 tok 延迟 19.1 s
GPT-5.6 Sol 通过 · 120 words, 0 banned, 1 question
Today, we’re introducing Provider Prompt Cache, a new API gateway feature that reuses prompt prefixes across supported AI providers, reducing latency, token costs, and duplicated processing. Teams can define cache policies once, route requests dynamically, and preserve provider flexibility without rewriting application logic. Switching models during testing or failover? The gateway identifies eligible prompt segments, applies provider-specific caching controls, and reports hits, misses, savings, and expiration details through unified logs and metrics. Configurable TTLs, tenant isolation, encryption, and cache-bypass options help teams balance performance, privacy, and freshness for every workload. Provider Prompt Cache is available today in beta through the dashboard and API, with SDK examples and migration guidance included. […]
输出 733 tok (+564 思考) 延迟 7.7 s
是否守住约束(字数预算、禁用词表、只能有一个问句)、文风特征,以及长度控制。
改一行代码就能在两个模型之间切换
下方每个标签页里都有两个模型 ID,高亮的那两行是唯一要改的地方。端点不变,API key 不变,请求结构也不变。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5",
# model="gpt-5.6-sol", # 取消注释此行,注释上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5",
// model: "gpt-5.6-sol", // 取消注释此行,注释上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5",
# "model": "gpt-5.6-sol", # 取消注释此行,注释上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5",
// Model: "gpt-5.6-sol", // 取消注释此行,注释上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5")
// .model("gpt-5.6-sol") // 取消注释此行,注释上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常见问题
Claude Opus 5 和 GPT-5.6 Sol 哪个更便宜?
两个模型的「输入 / 1M token」价格相同($5),所以这一项上价格分不出高下,请看下方的规格与能力。
不用分别集成两次,就能对 Claude Opus 5 和 GPT-5.6 Sol 做 A/B 测试吗?
可以。两个模型走同一个 OpenAI 兼容端点,用同一个 API key,切换时只要改一行里的模型名,所以可以给两个模型各分一部分流量,直接对比账单。
Claude Opus 5 和 GPT-5.6 Sol 支持提示词缓存吗?
支持。两个模型的缓存读取价都低于各自的输入价,所以前缀能反复命中缓存的负载,实际成本会比按官网价估算的低。具体的缓存读取价见上方价格表。