GPT-6.1 Sol vs Kimi K2.7 Code
何時用哪一個
當任務需要更大空間時請選擇 gpt-6.1-sol：其 1,050,000 個 token 的上下文約為 kimi-k2.7-code 的 256,000 的 4x，其 128,000 個 token 最大輸出也接近其 4x，且 $0.1 的快取讀取大約是 $0.19 費率的一半。kimi-k2.7-code 在全新 token 上較便宜，輸入為 $0.95、輸出為 $4，對比 $2 和 $10（約相差 2.1x 和 2.5x），且只有它除了文字和影像外還接受視訊輸入。兩者皆為輸出文字的模型，具備推理與工具，且 thinking 無法停用，因此真正的取捨在於規模和快取定價對比單個 token 成本。
Benchmark 成績
GPT-6.1 Sol:廠商沒有公布過 benchmark 成績。
廠商公布: Alibaba (Qwen) Moonshot OpenAI Z.ai
定價
| GPT-6.1 Sol | Kimi K2.7 Code | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $2 | $0.95 | 2.1× |
| 輸出 / 1M tokens | $10 | $4 | 2.5× |
| 快取讀取 / 1M tokens | $0.1 | $0.19 | 0.53× |
| 快取寫入 | 不額外計費 | - | - |
費率取自建置時的即時目錄；各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下，所有 76 個 聊天 模型的 每 1M tokens 的輸入價格（對數尺度）
能力
| GPT-6.1 Sol | Kimi K2.7 Code | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 常駐開啟 | 常駐開啟 |
| 結構化輸出 | 是 | - |
| 提示快取 | 隱式（自動） | 隱式（自動） |
| 快取生命週期 | 5-10m, up to 1h | 未公開 |
| 最小快取前綴 | 1024 個 token | 未公開 |
規格
| GPT-6.1 Sol | Kimi K2.7 Code | |
|---|---|---|
| 輸入模態 | 文字 影像 | 文字 影像 影片 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-09-29 | 2026-06 |
| 知識截止日期 | 2026-04 | - |
| 上下文視窗 | 1.1M | 256K |
| 最大輸出 | 128K | 33K |
| 思考參數 | reasoning.effort |
|
| 可接受的值 | reasoning.effort
| type
keep
|
| 預設值 | medium | thinking on with Preserved Thinking on |
規格摘錄自各供應商的文件；供應商未發布的資料列會直接省略，而非自行推測。 完整來源： GPT-6.1 Sol · Kimi K2.7 Code
單一提示詞，兩款模型 — 經由閘道測量
GPT-6.1 Sol 通過 · 3 sentences
Enabling reasoning makes the model do more computational work before answering, and many providers bill the resulting reasoning tokens even though users never see them. That means the same number of requests can cost twice as much because each request consumes more billable tokens, even if the visible answers stay the same length. We should confirm the increase in our usage breakdown and reserve higher reasoning levels for tasks where the improvement justifies the added cost.
輸出 144 tok (+54 思考) 延遲 6.6 s
Kimi K2.7 Code 通過 · 3 sentences
Enabling reasoning mode causes the model to generate an internal chain-of-thought before producing each answer, and that hidden reasoning text is billed like any other output. Those extra reasoning tokens typically add up to much more than the final response itself, so every API call now costs significantly more than before. Because our overall usage volume did not change, the doubled bill reflects that each query consumes roughly twice as many billable tokens.
輸出 259 tok (+174 思考) 延遲 5.4 s
指令遵循（恰好三句，可數）、受眾適配（面向 CFO 的語氣），以及下方 token 計量所暴露的隱藏思考計費缺口。
GPT-6.1 Sol 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The original function counts equal adjacent pairs rather than items in a run: a run of length `n` has only `n - 1` equal pairs, so a single-element input returns `0`, and a run ending at the last index is also undercounted. It does process the last index, so the issue is not a missing final check. Initializing each nonempty run to `1` and updating `best` after every iteration correctly counts items, including singleton and trailing runs; empty inputs still return `0`.
輸出 189 tok 延遲 6.3 s
Kimi K2.7 Code 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The bug is that the function counts *transitions* between equal neighbors instead of counting the items themselves, so a single-element list never enters the loop and returns `0` instead of `1`. Likewise, resetting `cur` to `0` on a mismatch forgets the current item that starts a new run, which causes runs that end at the last index to be undercounted. Initializing both `best` and `cur` to `1` and resetting `cur` to `1` fixes both issues.
輸出 410 tok (+222 思考) 延遲 9.4 s
修復是否真的正確（可執行）、解釋的資訊密度，以及在一個邊界明確的任務上的 token 效率。
GPT-6.1 Sol 通過 · 5/5 fields, guidance "Withheld pending the Q4 close"
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": null, "growth_pct": "eleven and change", "guidance": "Withheld pending the Q4 close" }
輸出 345 tok (+285 思考) 延遲 10.2 s
Kimi K2.7 Code 通過 · 5/5 fields, guidance "withheld pending the Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "withheld pending the Q4 close" } ```
輸出 721 tok (+663 思考) 延遲 13.2 s
schema 服從度（不臆造欄位）、幻覺壓力（guidance 明確被暫緩給出），以及結構化輸出路徑的差異。
GPT-6.1 Sol 通過 · 120 words, 0 banned, 1 question
Introducing Cross-Provider Prompt Cache, a new API gateway feature that stores reusable prompts and manages caching across your supported AI providers. Why rebuild the same context every time your application switches models? With one configuration, teams can reuse shared instructions, standardize cache policies, and reduce repeated prompt processing wherever provider caching is available. The gateway handles provider-specific requirements while giving you clear visibility into cache hits, usage, and estimated savings. Set expiration windows, isolate cached content by project, and invalidate entries when prompts change. Your existing routing logic stays intact, so you can compare models without rebuilding your caching workflow. […]
輸出 588 tok (+435 思考) 延遲 13.9 s
Kimi K2.7 Code 通過 · 120 words, 0 banned, 1 question
We're introducing Prompt Cache for our API Gateway, a new capability that stores prompt responses across multiple AI providers. By caching replies, you reduce redundant calls, lower latency, and cut costs without changing how you build. Teams using several model providers can now reuse identical prompt results instantly, keeping traffic consistent and budgets predictable. Responses are keyed by provider, model, and exact prompt, so you always get the right result. Configure TTL, hit thresholds, and eviction rules from a single dashboard. It fits into your existing routing and requires no code changes. Setup takes minutes and works with your current endpoints. Want to see how much latency and spend you can trim? Check the docs to enable Prompt Cache today.
輸出 2375 tok (+2235 思考) 延遲 38.6 s
約束服從度（字數預算、禁用詞表、唯一的那句問句）、文風指紋，以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點，相同的金鑰，相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="gpt-6.1-sol",
# model="kimi-k2.7-code", # 取消註解此行，並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "gpt-6.1-sol",
// model: "kimi-k2.7-code", // 取消註解此行，並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "gpt-6.1-sol",
# "model": "kimi-k2.7-code", # 取消註解此行，並註解上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "gpt-6.1-sol",
// Model: "kimi-k2.7-code", // 取消註解此行，並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("gpt-6.1-sol")
// .model("kimi-k2.7-code") // 取消註解此行，並註解上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
GPT-6.1 Sol 和 Kimi K2.7 Code 哪個比較便宜？
Kimi K2.7 Code 在 輸入 / 1m tokens 上較便宜（$0.95 對比 $2，相差 2.1×）。其他項目可能呈現相反結果 — 上表提供完整資訊，實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下，對 GPT-6.1 Sol 和 Kimi K2.7 Code 進行 A/B 測試嗎？
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務，並使用同一把 API 金鑰 — 切換只需更改一行的模型字串，因此您可以將部分流量分別導向兩者並直接比較帳單。
GPT-6.1 Sol 與 Kimi K2.7 Code 支援提示快取嗎？
是的 — 兩者的快取讀取費率皆低於其輸入費率，因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。