Dola Seed 2.0 Lite vs Qwen3.8 Flash
何時用哪一個
只有在需要音訊輸入時才選擇 Dola-Seed-2.0-lite；它是兩者中唯一能在 256000 token 脈絡內，接受文字、影像與影片外加音訊的模型。qwen3.8-flash 僅接受文字、影像與影片，但增加了 1000000 token 的視窗與推論及長脈絡標記，且在各個項目上都更便宜：每百萬輸入 token 為 $0.15 對比 $0.25，輸出為 $0.47 對比 $2（便宜約 4.3x），快取讀取為 $0.016 對比 $0.05。兩者的最大輸出皆限制在 131072 token 並允許停用思考功能，因此取捨在於音訊輸入對比脈絡長度與成本。
Benchmark 成績
廠商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
定價
| Dola Seed 2.0 Lite | Qwen3.8 Flash | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $0.25 | $0.15 | 1.7× |
| 輸出 / 1M tokens | $2 | $0.47 | 4.3× |
| 快取讀取 / 1M tokens | $0.05 | $0.016 | 3.1× |
| 快取寫入 | - | 1.25x | - |
費率取自建置時的即時目錄；各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下，所有 71 個 聊天 模型的 每 1M tokens 的輸入價格（對數尺度）
能力
| Dola Seed 2.0 Lite | Qwen3.8 Flash | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 可配置 | 可配置 |
| 結構化輸出 | 是 | 是 |
| 提示快取 | 隱式 + 顯式 | 隱式 + 顯式 |
| 快取生命週期 | 未公開 | explicit: 5m, reset on hit |
| 最小快取前綴 | 1024 個 token | 1024 個 token |
規格
| Dola Seed 2.0 Lite | Qwen3.8 Flash | |
|---|---|---|
| 輸入模態 | 文字 影像 音訊 影片 | 文字 影像 影片 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-02-14 | 2026-08-27 |
| 上下文視窗 | 256K | 1M |
| 最大輸出 | 131K | 131K |
| 思考參數 |
|
|
| 可接受的值 | thinking.type
reasoning_effort
| enable_thinking
thinking_budget
preserve_thinking
|
| 預設值 | enabled, with reasoning_effort medium | on qwen3.8-flash is hybrid thinking with thinking enabled by default, thinking_budget defaults to the 262,144-token chain maximum, and preserve_thinking is off |
規格摘錄自各供應商的文件；供應商未發布的資料列會直接省略，而非自行推測。 完整來源： Dola Seed 2.0 Lite · Qwen3.8 Flash
單一提示詞，兩款模型 — 經由閘道測量
Dola Seed 2.0 Lite 通過 · 3 sentences
Enabling reasoning on our production LLM requires the model to run resource-intensive multi-step chain-of-thought inference for every customer-facing query, rather than the single-pass inference that powered our original non-reasoning deployment, and GPU compute—which makes up 90% of our total LLM bill—scales directly with the number of compute cycles each query consumes. Our cloud provider’s LLM billing model charges per million processed tokens, and reasoning workflows generate an average of 2.1x more hidden processing tokens (the intermediate problem-solving steps the model never surfaces to end users) that are still billable, pushing our total monthly token consumption just over double what it was prior to enabling the feature. […]
輸出 1306 tok (+1096 思考) 延遲 18.2 s
Qwen3.8 Flash 通過 · 3 sentences
Enabling reasoning makes the model spend additional output tokens to plan and validate answers before responding, and those tokens are billed. It also increases compute and latency per request, so each task consumes more capacity than a non-reasoning call. As a result, billable tokens and compute roughly doubled, directly driving the higher invoice.
輸出 330 tok (+262 思考) 延遲 8.9 s
指令遵循（恰好三句，可數）、受眾適配（面向 CFO 的語氣），以及下方 token 計量所暴露的隱藏思考計費缺口。
Dola Seed 2.0 Lite 通過 · 8/8 cases
### Corrected Function ```python def longest_run(xs): if not xs: # Handle empty input edge case return 0 best = cur = 1 # Base run length of 1 for any non-empty single element for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 # Reset run length for the new, different element return best ``` ### Bug Explanation (single paragraph) The original function’s core flaw was that it counted the number of consecutive equal adjacent element pairs, rather than the number of elements in the run itself, leading to all results being off by one, which caused both reported issues: a run of k equal elements only has k-1 consecutive matching pairs, so the original function’s maximum `best` value was always one less than the true element count of the longest run. […]
輸出 2620 tok (+2217 思考) 延遲 33.2 s
Qwen3.8 Flash 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that the original version counts adjacent equal pairs rather than items in a run, starting both `cur` and `best` at `0`, and it resets `cur` to `0` after a mismatch, thereby discarding the first element of the new run. That makes single-element inputs return `0`, and because every run is effectively measured in “steps” between equal elements, the last element is not counted—particularly noticeable when the longest run ends at the final index.
輸出 2123 tok (+1933 思考) 延遲 43.8 s
修復是否真的正確（可執行）、解釋的資訊密度，以及在一個邊界明確的任務上的 token 效率。
Dola Seed 2.0 Lite 通過 · 5/5 fields, guidance "Formal guidance withheld pending Q4 clos"
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Formal guidance withheld pending Q4 close" }
輸出 1502 tok (+1439 思考) 延遲 20.2 s
Qwen3.8 Flash 通過 · 5/5 fields, guidance null
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null }
輸出 519 tok (+463 思考) 延遲 10.5 s
schema 服從度（不臆造欄位）、幻覺壓力（guidance 明確被暫緩給出），以及結構化輸出路徑的差異。
Dola Seed 2.0 Lite 未命中 · 141 words, 0 banned, 1 question
Today we launch Cross-Provider Prompt Cache, a new feature for our Core API Gateway built to cut redundant AI costs and latency for teams routing requests across multiple LLM providers. Many development teams rotate between OpenAI, Anthropic, and Google Gemini to balance performance, cost, and capability, but identical prompts get reprocessed from scratch with every provider switch, wasting tokens and slowing response times. This feature stores validated prompt responses at the gateway layer, so repeat requests pull from cache regardless of which provider they route to, with configurable TTLs and built-in compliance with all major provider data policies. […]
輸出 1870 tok (+1695 思考) 延遲 23.1 s
Qwen3.8 Flash 通過 · 120 words, 0 banned, 1 question
We are announcing prompt caching across providers in our API gateway. Store approved prompt outputs once and reuse them across supported model providers, cutting latency, cost, and duplicate token spend. The feature matches identical requests, checks validity, and returns cached results while preserving routing controls. Developers keep existing endpoints; the gateway manages storage, invalidation, and provider differences. This reduces noisy repeat calls, improves steady responses, and frees teams to focus on better agent workflows. OpenAI, Anthropic, Google, Mistral, and custom routes are supported. Cache hits appear in analytics with latency, token, and cost reductions visible. Check retention and privacy rules before enabling it. Ready to add cache controls to your gateway? Enable it in settings and watch spend drop now.
輸出 5958 tok (+5805 思考) 延遲 88.8 s
約束服從度（字數預算、禁用詞表、唯一的那句問句）、文風指紋，以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點，相同的金鑰，相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="Dola-Seed-2.0-lite",
# model="qwen3.8-flash", # 取消註解此行，並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "Dola-Seed-2.0-lite",
// model: "qwen3.8-flash", // 取消註解此行，並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "Dola-Seed-2.0-lite",
# "model": "qwen3.8-flash", # 取消註解此行，並註解上一行
"messages": [{"role": "user", "content": "Hello"}]
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "Dola-Seed-2.0-lite",
// Model: "qwen3.8-flash", // 取消註解此行，並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("Dola-Seed-2.0-lite")
// .model("qwen3.8-flash") // 取消註解此行，並註解上一行
.addUserMessage("Summarize this diff")
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
Dola Seed 2.0 Lite 和 Qwen3.8 Flash 哪個比較便宜？
Qwen3.8 Flash 在 輸入 / 1m tokens 上較便宜（$0.15 對比 $0.25，相差 1.7×）。其他項目可能呈現相反結果 — 上表提供完整資訊，實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下，對 Dola Seed 2.0 Lite 和 Qwen3.8 Flash 進行 A/B 測試嗎？
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務，並使用同一把 API 金鑰 — 切換只需更改一行的模型字串，因此您可以將部分流量分別導向兩者並直接比較帳單。
Dola Seed 2.0 Lite 與 Qwen3.8 Flash 支援提示快取嗎？
是的 — 兩者的快取讀取費率皆低於其輸入費率，因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。