🎁 新用戶 免費註冊,送 10 次呼叫,最高 $1,免綁卡。

Claude Opus 5 vs Kimi K2.7 Code

vs

何時該用哪一個 — 綜合評斷,而非基準測試數據表

claude-opus-5 的輸入約比 kimi-k2.7-code 貴 5.3 倍、輸出貴 6.25 倍(每百萬 token $5/$25 對 $0.95/$4),換來的是 1000000 token 脈絡、128000 最大輸出 token,以及一個可以關閉的思考模式。kimi-k2.7-code 適合 256000 脈絡和 32768 輸出 token 就夠的大批量編碼與工具工作,而且它是兩者中唯一接受視訊輸入的,儘管它的推理無法關閉。超長輸入或長單次回覆選 Opus 5;把生成開銷砍到約六分之一選 Kimi K2.7 Code。

定價

Claude Opus 5 Kimi K2.7 Code Δ
輸入 / 1M tokens $5 $0.95 5.3×
輸出 / 1M tokens $25 $4 6.3×
快取讀取 / 1M tokens $0.5 $0.19 2.6×
快取寫入 1.25x (5m) / 2x (1h)

費率取自建置時的即時目錄;各模型頁面皆附有目前的費率卡。

它們的相對位置 — 在此計費單位下,所有 63 個 聊天 模型的 每 1M tokens 的輸入價格(對數尺度)

Claude Opus 5 · $5 Kimi K2.7 Code · $0.95
$0.05 · Qwen3 VL Flash $30 · GPT-5.4 Pro

能力

Claude Opus 5 Kimi K2.7 Code
工具使用
思考控制 可配置 常駐開啟
結構化輸出
提示快取 顯式(由您標記前綴) 隱式(自動)
快取生命週期 5m default, 1h option 未公開
最小快取前綴 1024 個 token 未公開

規格

Claude Opus 5 Kimi K2.7 Code
輸入模態 文字 影像 文字 影像 影片
輸出模態 文字 文字
發布日期 2026-07-24 2026-06
知識截止日期 2026-05
上下文視窗 1M 256K
最大輸出 128K 33K
思考參數
  • thinking.type
  • output_config.effort
  • thinking.type
  • thinking.keep
可接受的值
thinking.type
  • adaptive
  • disabled
effort
  • low
  • medium
  • high
  • xhigh
  • max
type
  • accepts only enabled
keep
  • accepts only all
預設值

thinking on

effort
  • high (Claude API and Claude Code)
thinking on with Preserved Thinking on

規格摘錄自各供應商的文件;供應商未發布的資料列會直接省略,而非自行推測。 完整來源: Claude Opus 5 · Kimi K2.7 Code

單一提示詞,兩款模型 — 經由閘道測量

提示詞 Explain to a CFO, in exactly three sentences, why our LLM bill doubled after we enabled reasoning. 檢查 恰好 3 句

Claude Opus 5 通過 · 3 sentences

When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.

輸出 529 tok 延遲 9.0 s

Kimi K2.7 Code 通過 · 3 sentences

Enabling reasoning mode causes the model to generate an internal chain-of-thought before producing each answer, and that hidden reasoning text is billed like any other output. Those extra reasoning tokens typically add up to much more than the final response itself, so every API call now costs significantly more than before. Because our overall usage volume did not change, the doubled bill reflects that each query consumes roughly twice as many billable tokens.

輸出 259 tok (+174 思考) 延遲 5.4 s

指令遵循(恰好三句,可數)、受眾適配(面向 CFO 的語氣),以及下方 token 計量所暴露的隱藏思考計費缺口。

提示詞 This function is supposed to return the longest run of consecutive equal items, but callers report it is off by one on single-element inputs and misses runs that end at the last index. Fix it and explain the bug in one paragraph. 檢查 修復通過測試

Claude Opus 5 通過 · 8/8 cases

## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]

輸出 1094 tok 延遲 16.1 s

Kimi K2.7 Code 通過 · 8/8 cases

```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The bug is that the function counts *transitions* between equal neighbors instead of counting the items themselves, so a single-element list never enters the loop and returns `0` instead of `1`. Likewise, resetting `cur` to `0` on a mismatch forgets the current item that starts a new run, which causes runs that end at the last index to be undercounted. Initializing both `best` and `cur` to `1` and resetting `cur` to `1` fixes both issues.

輸出 410 tok (+222 思考) 延遲 9.4 s

修復是否真的正確(可執行)、解釋的資訊密度,以及在一個邊界明確的任務上的 token 效率。

提示詞 Extract a JSON object with fields {company, quarter, revenue_usd_m, growth_pct, guidance} from this text. Use null for anything not stated; add no other fields. 檢查 合法 JSON,schema 精確

Claude Opus 5 通過 · 5/5 fields, guidance "Withheld pending Q4 close"

```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.

輸出 539 tok 延遲 7.6 s

Kimi K2.7 Code 通過 · 5/5 fields, guidance "withheld pending the Q4 close"

```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "withheld pending the Q4 close" } ```

輸出 721 tok (+663 思考) 延遲 13.2 s

schema 服從度(不臆造欄位)、幻覺壓力(guidance 明確被暫緩給出),以及結構化輸出路徑的差異。

提示詞 Write a 120-word product announcement for an API gateway feature that caches prompts across providers. Forbidden words: "seamless", "unlock", "game-changer", "revolutionize", "empower". Exactly one sentence must be a question. 檢查 120 詞,0 個禁用詞

Claude Opus 5 通過 · 123 words, 0 banned, 1 question

**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.

輸出 1593 tok 延遲 19.1 s

Kimi K2.7 Code 通過 · 120 words, 0 banned, 1 question

We're introducing Prompt Cache for our API Gateway, a new capability that stores prompt responses across multiple AI providers. By caching replies, you reduce redundant calls, lower latency, and cut costs without changing how you build. Teams using several model providers can now reuse identical prompt results instantly, keeping traffic consistent and budgets predictable. Responses are keyed by provider, model, and exact prompt, so you always get the right result. Configure TTL, hit thresholds, and eviction rules from a single dashboard. It fits into your existing routing and requires no code changes. Setup takes minutes and works with your current endpoints. Want to see how much latency and spend you can trim? Check the docs to enable Prompt Cache today.

輸出 2375 tok (+2235 思考) 延遲 38.6 s

約束服從度(字數預算、禁用詞表、唯一的那句問句)、文風指紋,以及長度控制。

只需一行程式碼即可在兩者間切換

以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點,相同的金鑰,相同的請求結構。

from openai import OpenAI

client = OpenAI(
    base_url="https://synthorai.io/v1",
    api_key="sk-syn-...",
)

resp = client.chat.completions.create(
    model="claude-opus-5",
    # model="kimi-k2.7-code",  # 取消註解此行,並註解上一行
    messages=[{"role": "user", "content": "Summarize this diff"}],
    reasoning_effort="medium",
)
print(resp.choices[0].message.content)

取得 API 金鑰 →

常見問題

Claude Opus 5 和 Kimi K2.7 Code 哪個比較便宜?

Kimi K2.7 Code 在 輸入 / 1m tokens 上較便宜($0.95 對比 $5,相差 5.3×)。其他項目可能呈現相反結果 — 上表提供完整資訊,實際成本取決於您的使用組合。

我可以在不進行兩次整合的情況下,對 Claude Opus 5 和 Kimi K2.7 Code 進行 A/B 測試嗎?

可以。兩者皆透過同一個相容 OpenAI 的端點提供服務,並使用同一把 API 金鑰 — 切換只需更改一行的模型字串,因此您可以將部分流量分別導向兩者並直接比較帳單。

Claude Opus 5 與 Kimi K2.7 Code 支援提示快取嗎?

是的 — 兩者的快取讀取費率皆低於其輸入費率,因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。

相關比較