Claude Opus 5.5 vs DeepSeek V4 Pro (0813)
何時用哪一個
兩者皆具備 1,000,000 token 的上下文視窗，因此差異在於模態、輸出長度與價格：claude-opus-5-5 接受影像與文字輸入，並始終在啟用思考功能的狀態下執行，每百萬 token 為輸入 $4 與輸出 $20，大約是 deepseek-v4-pro-0813 的 $1.32 與 $3.96 的 3x 與 5x。當您需要輸入影像或想要其常駐開啟的推理模式時，請選擇 claude-opus-5-5；若需以較低成本進行純文字聊天、程式碼與工具工作，或當單次回覆必須很長時，請選擇 deepseek-v4-pro-0813，因為它允許 393216 token 輸出，而後者為 128000。
Benchmark 成績
廠商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
定價
| Claude Opus 5.5 | DeepSeek V4 Pro (0813) | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $4 | $1.32 | 3× |
| 輸出 / 1M tokens | $20 | $3.96 | 5.1× |
| 快取讀取 / 1M tokens | $0.2 | $0.132 | 1.5× |
| 快取寫入 | 1.25x (5m) / 2x (1h) | 不額外計費 | - |
費率取自建置時的即時目錄；各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下，所有 74 個 聊天 模型的 每 1M tokens 的輸入價格（對數尺度）
能力
| Claude Opus 5.5 | DeepSeek V4 Pro (0813) | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 常駐開啟 | 常駐開啟 |
| 結構化輸出 | 是 | 是 |
| 提示快取 | 顯式（由您標記前綴） | 隱式（自動） |
| 快取生命週期 | 5m default, 1h option | no fixed TTL (evicted when unused) |
| 最小快取前綴 | 1024 個 token | 未公開 |
規格
| Claude Opus 5.5 | DeepSeek V4 Pro (0813) | |
|---|---|---|
| 輸入模態 | 文字 影像 | 文字 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-09-22 | 2026-08-13 |
| 知識截止日期 | 2026-06 | - |
| 上下文視窗 | 1M | 1M |
| 最大輸出 | 128K | 393K |
| 思考參數 | output_config.effort | reasoning_effort |
| 可接受的值 | output_config.effort
| reasoning_effort
|
| 預設值 | medium | - |
規格摘錄自各供應商的文件；供應商未發布的資料列會直接省略，而非自行推測。 完整來源： Claude Opus 5.5 · DeepSeek V4 Pro (0813)
單一提示詞，兩款模型 — 經由閘道測量
Claude Opus 5.5 通過 · 3 sentences
When we turned on reasoning, the model began "thinking out loud" before each answer, generating thousands of internal working tokens that users never see but that we are billed for just like the final response. Those hidden tokens are charged at the output rate, typically the most expensive rate, so the same question with the same visible answer now costs roughly twice as much or more. We can bring the bill back down without losing the quality gains by capping the reasoning budget and reserving reasoning mode for the complex tasks that actually benefit from it.
輸出 263 tok (+102 思考) 延遲 5.7 s
DeepSeek V4 Pro (0813) 通過 · 3 sentences
Enabling reasoning causes the model to generate a hidden chain-of-thought with many additional tokens before producing the final answer, which sharply increases compute consumption per request. Those extra reasoning tokens are billed at the same or higher rates, so total usage doubled even though the volume of final outputs stayed similar. We can control this by adjusting reasoning effort, setting token limits, or routing only complex requests through reasoning mode.
輸出 308 tok (+226 思考) 延遲 5.1 s
指令遵循（恰好三句，可數）、受眾適配（面向 CFO 的語氣），以及下方 token 計量所暴露的隱藏思考計費缺口。
Claude Opus 5.5 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` **Explanation:** The original code counted *matching adjacent pairs* rather than *items in a run*. Both `cur` and `best` started at 0, and `cur` reset to 0 on a mismatch, so a run of length *n* was reported as *n − 1*. For a single-element list the loop never executes, so it returned 0 instead of 1. For `[5, 5]` it returned 1 instead of 2. The fix treats every element as the start of a run of length 1: `best` and `cur` start at 1, and `cur` resets to 1 (not 0) when the value changes. An explicit check returns 0 for an empty list. The "misses runs at the last index" reports are the same off-by-one bug rather than a separate one. […]
輸出 723 tok (+303 思考) 延遲 10.4 s
DeepSeek V4 Pro (0813) 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` was initialized to `0` and only counted adjacent matching pairs, so a run of length `n` produced `n - 1` (or `0` for a single element) instead of `n`. The code also reset to `0` on a change, when the new run should start at length `1`. Initializing `cur` and `best` to `1` fixes both the single-element case and runs ending at the last index.
輸出 1315 tok (+1130 思考) 延遲 16.9 s
修復是否真的正確（可執行）、解釋的資訊密度，以及在一個邊界明確的任務上的 token 效率。
Claude Opus 5.5 通過 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` **Judgment calls to check:** - **quarter**: Kept as "September quarter" rather than "Q3", since the fiscal calendar isn't stated. The text mentions an upcoming "Q4 close," so it may be fiscal Q3, but that's not certain. - **revenue_usd_m**: The text says only "412 for the topline." It doesn't state currency or units, and the figure is on a constant-currency basis, not reported USD. USD millions is an assumption. Use `null` if you need strictly stated values. - **growth_pct**: The source says "eleven and change," so the true figure is slightly above 11. 11 is an approximation. - **guidance**: Guidance was explicitly withheld. I recorded that rather than `null`, since the text addresses it directly.
輸出 829 tok (+488 思考) 延遲 10.9 s
DeepSeek V4 Pro (0813) 通過 · 5/5 fields, guidance null
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11.0,"guidance":null}
輸出 2155 tok (+2121 思考) 延遲 26.0 s
schema 服從度（不臆造欄位）、幻覺壓力（guidance 明確被暫緩給出），以及結構化輸出路徑的差異。
Claude Opus 5.5 通過 · 120 words, 0 banned, 1 question
Today we're launching Cross-Provider Prompt Caching for our API gateway. Why pay twice for the same context? Our gateway now stores repeated prompt prefixes, system instructions, and document chunks, then reuses them whether your request goes to OpenAI, Anthropic, Google, or an open-source model. Teams running retrieval pipelines or long agent loops can cut token costs by up to 60 percent and trim latency on every cached call. Setup takes one configuration flag; no code changes are required. Cache rules respect tenant boundaries, expire on your schedule, and log every hit for audit review. Dashboards show savings by provider, route, and application in real time. Cross-Provider Prompt Caching is available on all Pro and Enterprise plans. Turn it on today.
輸出 1263 tok (+1007 思考) 延遲 13.5 s
DeepSeek V4 Pro (0813) 通過 · 121 words, 0 banned, 1 question
Introducing cross-provider prompt caching in our API gateway. Send a prompt once, and the gateway stores its computed prefix across Anthropic, OpenAI, and other LLM providers. Subsequent requests with the same prompt hit the cache, cutting latency and token costs while keeping outputs consistent across routing decisions and provider failovers. Teams can route identical prompts between providers without reprocessing shared context or lengthy system instructions. How much could you save on repeated prompt prefixes? The cache respects provider-specific key formats, handles TTLs automatically, and works with streaming and batch requests. Enable it with one configuration flag—no changes to your application code. Available today on all plans. Monitor cache hit rates, token savings, and provider-specific performance metrics in the live dashboard.
輸出 2845 tok (+2694 思考) 延遲 25.5 s
約束服從度（字數預算、禁用詞表、唯一的那句問句）、文風指紋，以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點，相同的金鑰，相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5-5",
# model="deepseek-v4-pro-0813", # 取消註解此行，並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5-5",
// model: "deepseek-v4-pro-0813", // 取消註解此行，並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5-5",
# "model": "deepseek-v4-pro-0813", # 取消註解此行，並註解上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5-5",
// Model: "deepseek-v4-pro-0813", // 取消註解此行，並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5-5")
// .model("deepseek-v4-pro-0813") // 取消註解此行，並註解上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
Claude Opus 5.5 和 DeepSeek V4 Pro (0813) 哪個比較便宜？
DeepSeek V4 Pro (0813) 在 輸入 / 1m tokens 上較便宜（$1.32 對比 $4，相差 3.0×）。其他項目可能呈現相反結果 — 上表提供完整資訊，實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下，對 Claude Opus 5.5 和 DeepSeek V4 Pro (0813) 進行 A/B 測試嗎？
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務，並使用同一把 API 金鑰 — 切換只需更改一行的模型字串，因此您可以將部分流量分別導向兩者並直接比較帳單。
Claude Opus 5.5 與 DeepSeek V4 Pro (0813) 支援提示快取嗎？
是的 — 兩者的快取讀取費率皆低於其輸入費率，因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。