Claude Sonnet 5.5 vs DeepSeek V4 Pro (0813)
何時用哪一個
兩者均具備 1,000,000-token 的上下文視窗,但在價格與規格上有所分歧:claude-sonnet-5-5 的輸入成本約高出 1.5x(每百萬 $2 對比 $1.32),輸出成本約高出 2.5x($10 對比 $3.96),快取讀取為 $0.2 對比 $0.132。當您需要與文字一併輸入圖片時,請選擇 claude-sonnet-5-5,因為 deepseek-v4-pro-0813 不接受此輸入。若要以較低成本處理純文字對話、程式碼、工具及推理,或者當單一回覆長度需較長時,請選擇 deepseek-v4-pro-0813,因為它允許 393,216 輸出 token,而對比為 128,000。
Benchmark 成績
Claude Sonnet 5.5:廠商沒有公布過 benchmark 成績。
廠商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
定價
| Claude Sonnet 5.5 | DeepSeek V4 Pro (0813) | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $2 | $1.32 | 1.5× |
| 輸出 / 1M tokens | $10 | $3.96 | 2.5× |
| 快取讀取 / 1M tokens | $0.2 | $0.132 | 1.5× |
| 快取寫入 | 1.25x (5m) / 2x (1h) | 不額外計費 | - |
費率取自建置時的即時目錄;各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下,所有 76 個 聊天 模型的 每 1M tokens 的輸入價格(對數尺度)
能力
| Claude Sonnet 5.5 | DeepSeek V4 Pro (0813) | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 常駐開啟 | 常駐開啟 |
| 結構化輸出 | 是 | 是 |
| 提示快取 | 顯式(由您標記前綴) | 隱式(自動) |
| 快取生命週期 | 5m default, 1h option | no fixed TTL (evicted when unused) |
| 最小快取前綴 | 1024 個 token | 未公開 |
規格
| Claude Sonnet 5.5 | DeepSeek V4 Pro (0813) | |
|---|---|---|
| 輸入模態 | 文字 影像 | 文字 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-09-28 | 2026-08-13 |
| 知識截止日期 | 2026-06 | - |
| 上下文視窗 | 1M | 1M |
| 最大輸出 | 128K | 393K |
| 思考參數 | thinking.type | reasoning_effort |
| 可接受的值 | thinking.type
| reasoning_effort
|
| 預設值 | adaptive, effort high | - |
規格摘錄自各供應商的文件;供應商未發布的資料列會直接省略,而非自行推測。 完整來源: Claude Sonnet 5.5 · DeepSeek V4 Pro (0813)
單一提示詞,兩款模型 — 經由閘道測量
Claude Sonnet 5.5 通過 · 3 sentences
Enabling reasoning makes the model "think" before it answers, and that internal thinking is generated as extra text (reasoning tokens) that we are billed for at the same rate as output tokens, even though users never see it. Output tokens also cost several times more than input tokens, so a single request that used to produce a short answer can now generate many times more billable text behind the scenes. Because our request volume and prompts didn't change, the doubling comes almost entirely from this hidden thinking, and we can bring it down by limiting reasoning effort, turning it off for simple tasks, and reserving it for the workloads where the accuracy gain justifies the cost.
輸出 205 tok 延遲 3.6 s
DeepSeek V4 Pro (0813) 通過 · 3 sentences
Enabling reasoning causes the model to generate a hidden chain-of-thought with many additional tokens before producing the final answer, which sharply increases compute consumption per request. Those extra reasoning tokens are billed at the same or higher rates, so total usage doubled even though the volume of final outputs stayed similar. We can control this by adjusting reasoning effort, setting token limits, or routing only complex requests through reasoning mode.
輸出 308 tok (+226 思考) 延遲 5.1 s
指令遵循(恰好三句,可數)、受眾適配(面向 CFO 的語氣),以及下方 token 計量所暴露的隱藏思考計費缺口。
Claude Sonnet 5.5 通過 · 8/8 cases
**The bug:** `cur` counts the number of *adjacent equal pairs* rather than the number of items in the run. A run of length k contains only k−1 such pairs, so every result is one too small. The counter also starts at 0 and the loop starts at index 1, so a single-element list never updates `best` and returns 0 instead of 1. (An empty list should return 0.) In addition, `cur` resets to 0 on a mismatch, when it should reset to 1, because the item at `xs[i]` begins a new run of length 1. The claim that it "misses runs ending at the last index" is really the same off-by-one: the final run is counted, but as one less than its true length. Because `best` is updated inside the loop on every extension, the last run isn't skipped. […]
輸出 444 tok 延遲 6.7 s
DeepSeek V4 Pro (0813) 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` was initialized to `0` and only counted adjacent matching pairs, so a run of length `n` produced `n - 1` (or `0` for a single element) instead of `n`. The code also reset to `0` on a change, when the new run should start at length `1`. Initializing `cur` and `best` to `1` fixes both the single-element case and runs ending at the last index.
輸出 1315 tok (+1130 思考) 延遲 16.9 s
修復是否真的正確(可執行)、解釋的資訊密度,以及在一個邊界明確的任務上的 token 效率。
Claude Sonnet 5.5 通過 · 5/5 fields, guidance null
Here is the extracted JSON: ```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on the choices: - **quarter**: The text says "September quarter" without specifying a fiscal year or Q-number, so I kept the wording as stated. - **revenue_usd_m**: The text gives "412" for the topline, with no currency or unit stated explicitly. I've taken it as 412 million USD per the field definition, but the text does not confirm that, and the figure is constant-currency. - **growth_pct**: "Eleven and change" means slightly above 11, so 11 is an approximation. The exact figure isn't given. - **guidance**: Guidance is withheld pending the Q4 close, so no guidance is stated, hence null.
輸出 300 tok 延遲 3.5 s
DeepSeek V4 Pro (0813) 通過 · 5/5 fields, guidance null
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11.0,"guidance":null}
輸出 2155 tok (+2121 思考) 延遲 26.0 s
schema 服從度(不臆造欄位)、幻覺壓力(guidance 明確被暫緩給出),以及結構化輸出路徑的差異。
Claude Sonnet 5.5 通過 · 122 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching** Your API gateway now caches prompts across every connected LLM provider, whether you route traffic to OpenAI, Anthropic, Google, or a self-hosted model. Here's how it works: the gateway fingerprints each prompt prefix, stores it centrally, and applies the right provider-specific caching mechanism automatically. When you switch providers or fail over during an outage, your cached context follows you. Early testing shows input token costs dropping by up to 70% on repeated system prompts and long documents, with latency improvements of 40% or more on cache hits. Tired of paying to send the same instructions thousands of times a day? Enable it with one configuration flag. Cache rules, TTLs, and per-team isolation are available in the dashboard today.
輸出 266 tok 延遲 3.8 s
DeepSeek V4 Pro (0813) 通過 · 121 words, 0 banned, 1 question
Introducing cross-provider prompt caching in our API gateway. Send a prompt once, and the gateway stores its computed prefix across Anthropic, OpenAI, and other LLM providers. Subsequent requests with the same prompt hit the cache, cutting latency and token costs while keeping outputs consistent across routing decisions and provider failovers. Teams can route identical prompts between providers without reprocessing shared context or lengthy system instructions. How much could you save on repeated prompt prefixes? The cache respects provider-specific key formats, handles TTLs automatically, and works with streaming and batch requests. Enable it with one configuration flag—no changes to your application code. Available today on all plans. Monitor cache hit rates, token savings, and provider-specific performance metrics in the live dashboard.
輸出 2845 tok (+2694 思考) 延遲 25.5 s
約束服從度(字數預算、禁用詞表、唯一的那句問句)、文風指紋,以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點,相同的金鑰,相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-sonnet-5-5",
# model="deepseek-v4-pro-0813", # 取消註解此行,並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-sonnet-5-5",
// model: "deepseek-v4-pro-0813", // 取消註解此行,並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-sonnet-5-5",
# "model": "deepseek-v4-pro-0813", # 取消註解此行,並註解上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-sonnet-5-5",
// Model: "deepseek-v4-pro-0813", // 取消註解此行,並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-sonnet-5-5")
// .model("deepseek-v4-pro-0813") // 取消註解此行,並註解上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
Claude Sonnet 5.5 和 DeepSeek V4 Pro (0813) 哪個比較便宜?
DeepSeek V4 Pro (0813) 在 輸入 / 1m tokens 上較便宜($1.32 對比 $2,相差 1.5×)。其他項目可能呈現相反結果 — 上表提供完整資訊,實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下,對 Claude Sonnet 5.5 和 DeepSeek V4 Pro (0813) 進行 A/B 測試嗎?
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務,並使用同一把 API 金鑰 — 切換只需更改一行的模型字串,因此您可以將部分流量分別導向兩者並直接比較帳單。
Claude Sonnet 5.5 與 DeepSeek V4 Pro (0813) 支援提示快取嗎?
是的 — 兩者的快取讀取費率皆低於其輸入費率,因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。