DeepSeek V4.1 Flash vs Kimi K3.1 Pro
언제 어떤 모델을 쓸까
기본 출력 요금은 백만 토큰당 $1.2와 $10입니다(deepseek-v4.1-flash, kimi-k3.1-pro 순). 공개 가중치가 중요한 텍스트 및 이미지 작업에는 deepseek-v4.1-flash을 검토하세요. deepseek-v4.1-flash과 비교할 때 스크린샷 입력과 구조화된 응답이 필요한 장시간 코딩에는 kimi-k3.1-pro를 검토하세요.
벤치마크
Kimi K3.1 Pro: 공급자가 벤치마크 점수를 공개하지 않았습니다.
공급자 공개 자료: Alibaba (Qwen) Alibaba (Qwen) Alibaba (Qwen) Alibaba (Qwen) Alibaba (Qwen) Alibaba (Qwen) Alibaba (Qwen) Anthropic Anthropic Anthropic Anthropic ByteDance DeepSeek DeepSeek Google Google Google MiniMax Moonshot OpenAI OpenAI OpenAI OpenAI OpenAI Tencent Z.ai Z.ai Z.ai Z.ai
가격
| DeepSeek V4.1 Flash | Kimi K3.1 Pro | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $0.3 | $2 | 0.15× |
| 출력 / 1M 토큰 | $1.2 | $10 | 0.12× |
| 캐시 읽기 / 1M 토큰 | $0.006 | $0.2 | 0.03× |
| 캐시 쓰기 | 별도 요금 없음 | - | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 86개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| DeepSeek V4.1 Flash | Kimi K3.1 Pro | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 지원(공급자가 조절 파라미터를 공개하지 않음) | 지원(공급자가 조절 파라미터를 공개하지 않음) |
| 구조화된 출력 | - | 지원 |
| 프롬프트 캐싱 | 암시적(자동) | 암시적(자동) |
| 캐시 수명 | no fixed TTL (evicted when unused) | 미공개 |
| 최소 캐시 접두사 | 미공개 | 미공개 |
사양
| DeepSeek V4.1 Flash | Kimi K3.1 Pro | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-09-10 | 2026-10-23 |
| 컨텍스트 윈도우 | 1,000,000 | 1,048,576 |
| 최대 출력 | 393,216 | 1,048,576 |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: DeepSeek V4.1 Flash · Kimi K3.1 Pro
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
DeepSeek V4.1 Flash 통과 · 3 sentences
Enabling reasoning changed the unit economics: the model now spends extra billable tokens internally to “think” before producing the answer, and those reasoning tokens are charged like output tokens even though users never see them. That added token generation—plus longer contexts and occasional retries on harder prompts—roughly doubled our cost per request. We can control this by capping reasoning depth, routing only complex queries to reasoning models, and caching common prompts to bring the bill back down.
출력 423 tok (+327 사고) 지연 시간 14.6 s
Kimi K3.1 Pro 통과 · 3 sentences
Enabling reasoning makes the model generate extra internal “thinking” tokens before responding, and these are typically billed at output-token rates even though users never see them. If request volume and pricing stayed flat but reasoning substantially increased tokens per request, the total bill could double. Compare pre- and post-change usage reports for reasoning tokens, then control costs with lower reasoning effort, token budgets, cheaper models, and selective use on tasks where the quality gain justifies the spend.
출력 471 tok (+366 사고) 지연 시간 14.3 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
DeepSeek V4.1 Flash 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` is counting equal adjacent pairs, not elements in the current run: every time `xs[i] == xs[i - 1]`, the run length increases by one element, but the first element of the run was never counted, so all runs are undercounted by one. Also, `best` starts at `0`, so single-element inputs return `0` instead of `1`, and a one-element run ending at the last index is missed entirely.
출력 918 tok (+733 사고) 지연 시간 11.4 s
Kimi K3.1 Pro 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: best = max(best, cur) cur = 1 return max(best, cur) ``` The original `cur` counts matching adjacent pairs rather than items: it starts at 0, so a singleton returns 0, and a run of `k` equal items is recorded as only `k - 1`. Its bookkeeping also never correctly finalizes the current run’s length at end of input. The fix starts every run at 1, records its length when a mismatch ends it, and takes a final `max` after the loop so a run ending at the last index is included; empty input returns 0.
출력 2984 tok (+2785 사고) 지연 시간 70.1 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
DeepSeek V4.1 Flash 통과 · 5/5 fields, guidance "withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11.0,"guidance":"withheld pending the Q4 close"}
출력 1707 tok (+1667 사고) 지연 시간 15.1 s
Kimi K3.1 Pro 통과 · 5/5 fields, guidance null
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11,"guidance":null}
출력 454 tok (+410 사고) 지연 시간 12.0 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
DeepSeek V4.1 Flash 통과 · 116 words, 0 banned, 1 question
Today we're launching Cross-Provider Prompt Cache for our API gateway. It stores identical prompt requests and their responses across supported model providers, then serves cached results when a match is found. Teams can cut duplicate inference costs, reduce latency, and keep behavior consistent during provider failover. The cache works with configurable TTLs, per-route rules, and cache-key controls, so you decide what is reusable and what must stay fresh. Does your application send the same prompts to multiple providers? Now your gateway can answer many of those calls without another upstream request. Existing observability dashboards show hit rates, saved tokens, and estimated spend reduction. Enable it in the gateway console, set your policy, and start caching today.
출력 917 tok (+770 사고) 지연 시간 9.0 s
Kimi K3.1 Pro 통과 · 120 words, 0 banned, 1 question
Meet Prompt Cache, our new API gateway feature for caching prompts and responses across model providers. It cuts token spend, lowers latency, and keeps applications responsive during traffic surges. Define cache keys, expiration rules, and tenant boundaries in one policy, then apply them to OpenAI, Anthropic, Gemini, or custom models without changing application code. Encryption, redaction, and immediate purges help protect sensitive data, while metrics reveal hit rates, savings, and performance by endpoint and provider. Need a faster way to handle repeated requests? Serve eligible results from cache and preserve your existing routing, fallback, and retry behavior. Available today in beta, Prompt Cache gives platform teams controls for cost, speed, and reliability, with no extra infrastructure to deploy or maintain.
출력 2740 tok (+2576 사고) 지연 시간 55.8 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="deepseek-v4.1-flash",
# model="kimi-k3.1-pro", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "deepseek-v4.1-flash",
// model: "kimi-k3.1-pro", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "deepseek-v4.1-flash",
# "model": "kimi-k3.1-pro", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "deepseek-v4.1-flash",
// Model: "kimi-k3.1-pro", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("deepseek-v4.1-flash")
// .model("kimi-k3.1-pro") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
DeepSeek V4.1 Flash vs Kimi K3.1 Pro, 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 DeepSeek V4.1 Flash 쪽이 더 저렴합니다($0.3 대 $2, 6.7배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 DeepSeek V4.1 Flash vs Kimi K3.1 Pro A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
DeepSeek V4.1 Flash, Kimi K3.1 Pro 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.