DeepSeek V4.1 Flash (1017) vs Kimi K2.7 Code
언제 어떤 모델을 쓸까
deepseek-v4.1-flash-1017은 더 저렴하면서 토큰 한도도 더 넉넉한 선택지입니다. 입력 요금은 $0.3, 출력 요금은 $1.2이며, kimi-k2.7-code는 각각 $0.95, $4로 약 3.2배, 3.3배 더 비쌉니다. 컨텍스트는 1000000토큰 대 256000토큰, 최대 출력 토큰 수는 393216 대 32768이며, 캐시 읽기 요금은 $0.006 대 $0.19입니다. DeepSeek 모델이 지원하지 않는 동영상 입력이 필요하고 추론을 끌 수 없어도 괜찮다면 kimi-k2.7-code를 선택하세요. 긴 컨텍스트를 사용하는 텍스트·이미지 작업, 대량 초안 작성, 캐시 활용이 많은 파이프라인에는 2026-10-17 DeepSeek 모델이 경제적인 기본 선택지입니다.
벤치마크
DeepSeek V4.1 Flash (1017): 공급자가 벤치마크 점수를 공개하지 않았습니다.
공급자 공개 자료: Alibaba (Qwen) Moonshot OpenAI Z.ai
가격
| DeepSeek V4.1 Flash (1017) | Kimi K2.7 Code | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $0.3 | $0.95 | 0.32× |
| 출력 / 1M 토큰 | $1.2 | $4 | 0.3× |
| 캐시 읽기 / 1M 토큰 | $0.006 | $0.19 | 0.032× |
| 캐시 쓰기 | 별도 요금 없음 | - | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 79개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| DeepSeek V4.1 Flash (1017) | Kimi K2.7 Code | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 지원(공급자가 조절 파라미터를 공개하지 않음) | 항상 켜짐 |
| 프롬프트 캐싱 | 암시적(자동) | 암시적(자동) |
| 캐시 수명 | no fixed TTL (evicted when unused) | 미공개 |
| 최소 캐시 접두사 | 미공개 | 미공개 |
사양
| DeepSeek V4.1 Flash (1017) | Kimi K2.7 Code | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 동영상 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-10-17 | 2026-06 |
| 컨텍스트 윈도우 | 1M | 256K |
| 최대 출력 | 393K | 33K |
| 사고 파라미터 | - |
|
| 허용 값 | - | type
keep
|
| 기본값 | - | thinking on with Preserved Thinking on |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: DeepSeek V4.1 Flash (1017) · Kimi K2.7 Code
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
DeepSeek V4.1 Flash (1017) 통과 · 3 sentences
Enabling reasoning caused each request to generate additional internal reasoning tokens, which are billed like output tokens and can be several times longer than the final answer. Those extra tokens raise cost per call, and longer responses plus occasional retries pushed total usage to roughly double. We can control this with reasoning-effort limits, token budgets, caching, and spend monitoring by use case.
출력 253 tok (+178 사고) 지연 시간 5.4 s
Kimi K2.7 Code 통과 · 3 sentences
Enabling reasoning mode causes the model to generate an internal chain-of-thought before producing each answer, and that hidden reasoning text is billed like any other output. Those extra reasoning tokens typically add up to much more than the final response itself, so every API call now costs significantly more than before. Because our overall usage volume did not change, the doubled bill reflects that each query consumes roughly twice as many billable tokens.
출력 259 tok (+174 사고) 지연 시간 5.4 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
DeepSeek V4.1 Flash (1017) 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` starts at `0` and is incremented only when two adjacent items match, so it counts equal adjacent pairs rather than run length; a run of length `k` is recorded as `k - 1`. Consequently, a single-element input returns `0`, and a run ending at the last index—especially a one-element final run—is undercounted or never counted. The fix initializes every run to length `1`, increments on a match, resets to `1` on a mismatch, updates `best` each iteration, and handles the empty input separately.
출력 1300 tok (+1095 사고) 지연 시간 11.8 s
Kimi K2.7 Code 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The bug is that the function counts *transitions* between equal neighbors instead of counting the items themselves, so a single-element list never enters the loop and returns `0` instead of `1`. Likewise, resetting `cur` to `0` on a mismatch forgets the current item that starts a new run, which causes runs that end at the last index to be undercounted. Initializing both `best` and `cur` to `1` and resetting `cur` to `1` fixes both issues.
출력 410 tok (+222 사고) 지연 시간 9.4 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
DeepSeek V4.1 Flash (1017) 통과 · 5/5 fields, guidance "withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11,"guidance":"withheld pending the Q4 close"}
출력 1375 tok (+1337 사고) 지연 시간 12.2 s
Kimi K2.7 Code 통과 · 5/5 fields, guidance "withheld pending the Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "withheld pending the Q4 close" } ```
출력 721 tok (+663 사고) 지연 시간 13.2 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
DeepSeek V4.1 Flash (1017) 통과 · 120 words, 0 banned, 1 question
Today we’re introducing Cross-Provider Prompt Cache in the API gateway. It stores identical prompt requests once and serves cached responses across supported model providers, reducing duplicate calls, latency, and spend. Teams can set cache keys by model, temperature, system prompt, and custom metadata, then choose TTLs per route or workspace. The gateway handles provider fallback while keeping cached results consistent with your policy. Is your team paying twice for the same prompt? Cross-Provider Prompt Cache helps you answer that. Configure it in the gateway dashboard, inspect hit rates by provider, and invalidate entries on demand. Existing gateway routes need no code changes; enable the feature and define your caching rules. Cross-Provider Prompt Cache is available for all API gateway customers.
출력 2487 tok (+2335 사고) 지연 시간 17.1 s
Kimi K2.7 Code 통과 · 120 words, 0 banned, 1 question
We're introducing Prompt Cache for our API Gateway, a new capability that stores prompt responses across multiple AI providers. By caching replies, you reduce redundant calls, lower latency, and cut costs without changing how you build. Teams using several model providers can now reuse identical prompt results instantly, keeping traffic consistent and budgets predictable. Responses are keyed by provider, model, and exact prompt, so you always get the right result. Configure TTL, hit thresholds, and eviction rules from a single dashboard. It fits into your existing routing and requires no code changes. Setup takes minutes and works with your current endpoints. Want to see how much latency and spend you can trim? Check the docs to enable Prompt Cache today.
출력 2375 tok (+2235 사고) 지연 시간 38.6 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="deepseek-v4.1-flash-1017",
# model="kimi-k2.7-code", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "deepseek-v4.1-flash-1017",
// model: "kimi-k2.7-code", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "deepseek-v4.1-flash-1017",
# "model": "kimi-k2.7-code", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "deepseek-v4.1-flash-1017",
// Model: "kimi-k2.7-code", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("deepseek-v4.1-flash-1017")
// .model("kimi-k2.7-code") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
DeepSeek V4.1 Flash (1017) vs Kimi K2.7 Code, 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 DeepSeek V4.1 Flash (1017) 쪽이 더 저렴합니다($0.3 대 $0.95, 3.2배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 DeepSeek V4.1 Flash (1017) vs Kimi K2.7 Code A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
DeepSeek V4.1 Flash (1017), Kimi K2.7 Code 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.