Claude Sonnet 5.5 vs MiniMax M3

vs

언제 어떤 모델을 쓸까

minimax-m3는 텍스트 생성이 저렴하고 동영상 입력과 훨씬 큰 출력 한도를 제공합니다. 구조화된 출력이 필수라면 claude-sonnet-5-5를 선택하세요. minimax-m3의 기능 목록에는 해당 기능이 없습니다.

가격

Claude Sonnet 5.5 MiniMax M3 Δ
입력 / 1M 토큰 $2 $0.3 6.7×
출력 / 1M 토큰 $10 $1.2 8.3×
캐시 읽기 / 1M 토큰 $0.1 $0.06 1.7×
캐시 쓰기 1.25x (5m) / 2x (1h) 별도 요금 없음 -

빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.

가격 위치: 이 과금 단위를 쓰는 채팅 모델 80개 전체의 1M 토큰당 입력 가격(로그 스케일)

$0.05 · Qwen3 VL Flash $30 · GPT-5.4 Pro

기능

Claude Sonnet 5.5 MiniMax M3
도구 사용 지원 지원
사고 제어 항상 켜짐 설정 가능
구조화된 출력 지원 -
프롬프트 캐싱 명시적(접두사 직접 지정) 암시적(자동)
캐시 수명 5m default, 1h option 미공개
최소 캐시 접두사 512 토큰 512 토큰

사양

Claude Sonnet 5.5 MiniMax M3
입력 모달리티 텍스트 이미지 텍스트 이미지 동영상
출력 모달리티 텍스트 텍스트
출시일 2026-09-28 2026-06-01
지식 컷오프 2026-06 -
컨텍스트 윈도우 1M 1M
최대 출력 128K 524K
사고 파라미터 thinking.type
  • thinking.type
  • reasoning_split
허용 값
thinking.type
  • adaptive (default)
  • between_tools
thinking.type
  • adaptive
  • disabled
reasoning_split
  • boolean
기본값 adaptive, effort high adaptive: thinking on, with the model deciding when extra reasoning helps

사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Sonnet 5.5 · MiniMax M3

같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정

프롬프트 Explain to a CFO, in exactly three sentences, why our LLM bill doubled after we enabled reasoning. 검증 정확히 3문장

Claude Sonnet 5.5 통과 · 3 sentences

Enabling reasoning makes the model "think" before it answers, and that internal thinking is generated as extra text (reasoning tokens) that we are billed for at the same rate as output tokens, even though users never see it. Output tokens also cost several times more than input tokens, so a single request that used to produce a short answer can now generate many times more billable text behind the scenes. Because our request volume and prompts didn't change, the doubling comes almost entirely from this hidden thinking, and we can bring it down by limiting reasoning effort, turning it off for simple tasks, and reserving it for the workloads where the accuracy gain justifies the cost.

출력 205 tok 지연 시간 3.6 s

MiniMax M3 통과 · 3 sentences

Reasoning models don't just answer — they first generate extensive internal "thinking" tokens to work through the problem step-by-step, and you're billed for all of those tokens even though users never see them. A query that previously cost ~200 tokens may now cost 2,000–10,000 once reasoning is enabled, multiplying per-query spend by roughly 5–50x while the visible output stayed the same size — that's the doubling. The lever is tuning: cap reasoning effort on simple queries, cache the reasoning traces, and reserve the full reasoning model for only your hardest 10–20% of requests, which typically restores 60–80% of the savings.

출력 764 tok (+629 사고) 지연 시간 3.5 s

지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.

프롬프트 This function is supposed to return the longest run of consecutive equal items, but callers report it is off by one on single-element inputs and misses runs that end at the last index. Fix it and explain the bug in one paragraph. 검증 수정 후 테스트 통과

Claude Sonnet 5.5 통과 · 8/8 cases

**The bug:** `cur` counts the number of *adjacent equal pairs* rather than the number of items in the run. A run of length k contains only k−1 such pairs, so every result is one too small. The counter also starts at 0 and the loop starts at index 1, so a single-element list never updates `best` and returns 0 instead of 1. (An empty list should return 0.) In addition, `cur` resets to 0 on a mismatch, when it should reset to 1, because the item at `xs[i]` begins a new run of length 1. The claim that it "misses runs ending at the last index" is really the same off-by-one: the final run is counted, but as one less than its true length. Because `best` is updated inside the loop on every extension, the last run isn't skipped. […]

출력 444 tok 지연 시간 6.7 s

MiniMax M3 통과 · 8/8 cases

The bug is that the loop starts at index 1 and treats `cur` as the number of *equal transitions* rather than the run length, so a run of *k* consecutive equal items is reported as `k − 1`, and a single-element list (where the loop body never executes) returns 0 instead of 1. A correct version tracks the actual run length by seeding `cur = 1` and resetting it to 1 (not 0) on a mismatch: ```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` Now `[5]` returns `1`, `[1,1,1]` returns `3`, and a run like `[1,2,2,2]` that ends at the last index is correctly captured as `3` because `cur` is updated before `best` is compared on every iteration, including the final one.

출력 845 tok (+596 사고) 지연 시간 3.5 s

수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.

프롬프트 Extract a JSON object with fields {company, quarter, revenue_usd_m, growth_pct, guidance} from this text. Use null for anything not stated; add no other fields. 검증 유효한 JSON, 스키마와 정확히 일치

Claude Sonnet 5.5 통과 · 5/5 fields, guidance null

Here is the extracted JSON: ```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on the choices: - **quarter**: The text says "September quarter" without specifying a fiscal year or Q-number, so I kept the wording as stated. - **revenue_usd_m**: The text gives "412" for the topline, with no currency or unit stated explicitly. I've taken it as 412 million USD per the field definition, but the text does not confirm that, and the figure is constant-currency. - **growth_pct**: "Eleven and change" means slightly above 11, so 11 is an approximation. The exact figure isn't given. - **guidance**: Guidance is withheld pending the Q4 close, so no guidance is stated, hence null.

출력 300 tok 지연 시간 3.5 s

MiniMax M3 통과 · 5/5 fields, guidance null

```json { "company": null, "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": null, "guidance": null } ```

출력 1002 tok (+955 사고) 지연 시간 3.6 s

스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.

프롬프트 Write a 120-word product announcement for an API gateway feature that caches prompts across providers. Forbidden words: "seamless", "unlock", "game-changer", "revolutionize", "empower". Exactly one sentence must be a question. 검증 120단어, 금지어 0개

Claude Sonnet 5.5 통과 · 122 words, 0 banned, 1 question

**Introducing Cross-Provider Prompt Caching** Your API gateway now caches prompts across every connected LLM provider, whether you route traffic to OpenAI, Anthropic, Google, or a self-hosted model. Here's how it works: the gateway fingerprints each prompt prefix, stores it centrally, and applies the right provider-specific caching mechanism automatically. When you switch providers or fail over during an outage, your cached context follows you. Early testing shows input token costs dropping by up to 70% on repeated system prompts and long documents, with latency improvements of 40% or more on cache hits. Tired of paying to send the same instructions thousands of times a day? Enable it with one configuration flag. Cache rules, TTLs, and per-team isolation are available in the dashboard today.

출력 266 tok 지연 시간 3.8 s

MiniMax M3 통과 · 121 words, 0 banned, 1 question

Introducing PromptCache, our intelligent caching layer for the API gateway. Tired of paying twice for identical requests? The feature stores prompt-response pairs across every connected provider, returning cached results instead of hitting costly endpoints. Deployment requires only a single configuration flag, and semantic similarity detection happens automatically. Latency drops up to 70% on repeated traffic while costs follow the same downward curve. Developers access detailed cache hit metrics, eviction logs, and provider breakdowns through the dashboard. Whether routing to OpenAI, Anthropic, or local models, every cached token saves time and money. The cache respects TTL policies, supports manual purging, and encrypts stored content. Available today for Pro and Enterprise tiers—enable PromptCache on existing endpoints and watch inference bills shrink immediately.

출력 2808 tok (+2656 사고) 지연 시간 6.0 s

제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.

코드 한 줄로 모델 전환

아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.

from openai import OpenAI

client = OpenAI(
    base_url="https://synthorai.io/v1",
    api_key="sk-syn-...",
)

resp = client.chat.completions.create(
    model="claude-sonnet-5-5",
    # model="minimax-m3",  # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
    messages=[{"role": "user", "content": "Summarize this diff"}],
    reasoning_effort="medium",
)
print(resp.choices[0].message.content)

API 키 받기 →

자주 묻는 질문

Claude Sonnet 5.5 vs MiniMax M3, 어느 쪽이 더 저렴한가요?

입력 / 1M 토큰 기준으로는 MiniMax M3 쪽이 더 저렴합니다($0.3 대 $2, 6.7배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.

연동을 두 번 하지 않고도 Claude Sonnet 5.5 vs MiniMax M3 A/B 테스트를 할 수 있나요?

네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.

Claude Sonnet 5.5, MiniMax M3 모두 프롬프트 캐싱을 지원하나요?

네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.

관련 비교

직접 측정한 자료