신규 무료로 가입하고 10회 호출해 보세요. 최대 $1, 카드 등록 불필요.

Claude Fable 5 vs DeepSeek V4 Flash (0731)

Claude Fable 5 모델은 Synthorai 카탈로그에서 서비스가 종료되었습니다. 아래 수치는 마지막으로 공개된 요금이며, 이 모델은 더 이상 호출할 수 없습니다. 비교 대상인 다른 모델은 계속 호출할 수 있습니다.

vs

언제 어떤 모델을 쓸까

두 모델 모두 1000000 토큰 컨텍스트 창을 공유하므로, 가격, 모달리티 및 출력 길이에 따라 선택이 나뉩니다: claude-fable-5는 텍스트 및 이미지 입력을 받고 항상 thinking이 활성화된 상태로 실행(비활성화할 수 없음)되는 반면, deepseek-v4-flash-0731은 텍스트 전용이지만 Fable의 128000 토큰 대비 최대 393216 출력 토큰을 허용합니다. 요금표를 보면 claude-fable-5는 100만 입력 토큰당 약 23배($10 대 $0.44), 출력에서 약 38배($50 대 $1.32) 더 비쌉니다. 이미지 입력이나 내장된 추론 단계가 필요한 경우 claude-fable-5를 선택하고, 저렴하고 긴 텍스트 생성이 필요한 경우 deepseek-v4-flash-0731을 선택하십시오.

벤치마크

우세평균 상회최고 점수Claude Fable 51986 / 9740 / 97DeepSeek V4 Flash (0731)110 / 280 / 28

두 모델 모두 측정한 항목 20개.

Claude Fable 5 DeepSeek V4 Flash (0731) 측정된 다른 모델 다른 모델 평균 ★ 더 높은 점수를 낸 모델 없음
SWE-Bench Pro
더 높은 점수를 낸 모델 없음 80.3%
56%
BioMysteryBench hard
46.5%
N/A
OSWorld-Verified
더 높은 점수를 낸 모델 없음 85%
N/A
Cybergym
83.1%
76.7%
HealthBench Professional
60.9%
N/A
JobBench
더 높은 점수를 낸 모델 없음 57.4%
41.3%
Harvey Lab-AA
93.6%
N/A
GPQA Diamond
92.6%
89.9%
Blueprint-Bench 2
38.6%
N/A
Agents' Last Exam
48.7%
25.2%
CharXiv (RQ) reasoning
더 높은 점수를 낸 모델 없음 88.9%
N/A

공급자 공개 자료: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai

가격

Claude Fable 5 DeepSeek V4 Flash (0731) Δ
입력 / 1M 토큰 $10 $0.44 23×
출력 / 1M 토큰 $50 $1.32 38×
캐시 읽기 / 1M 토큰 $1 $0.044 23×
캐시 쓰기 1.25x (5m) / 2x (1h) 별도 요금 없음 -

빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.

가격 위치: 이 과금 단위를 쓰는 채팅 모델 76개 전체의 1M 토큰당 입력 가격(로그 스케일)

기능

Claude Fable 5 DeepSeek V4 Flash (0731)
도구 사용 지원 지원
사고 제어 항상 켜짐 지원(공급자가 조절 파라미터를 공개하지 않음)
구조화된 출력 지원 지원
프롬프트 캐싱 명시적(접두사 직접 지정) 암시적(자동)
캐시 수명 5m default, 1h option no fixed TTL (evicted when unused)
최소 캐시 접두사 1024 토큰 미공개

사양

Claude Fable 5 DeepSeek V4 Flash (0731)
입력 모달리티 텍스트 이미지 텍스트
출력 모달리티 텍스트 텍스트
출시일 2026-06-09 2026-07-31
지식 컷오프 2026-01 -
컨텍스트 윈도우 1M 1M
최대 출력 128K 393K
사고 파라미터 output_config.effort (thinking.type is adaptive-only and needs no configuration) -
허용 값
effort
  • low
  • medium
  • high
  • xhigh
  • max

both "enabled" and "disabled" return 400

-
기본값

thinking always on (adaptive)

effort
  • high
-

사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Fable 5 · DeepSeek V4 Flash (0731)

같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정

프롬프트 Explain to a CFO, in exactly three sentences, why our LLM bill doubled after we enabled reasoning. 검증 정확히 3문장

Claude Fable 5 통과 · 3 sentences

When we enabled reasoning, the model began generating extensive internal "thinking" tokens before each answer, and those tokens are billed as output even though users never see them. Output tokens typically cost several times more than input tokens, so adding thousands of hidden reasoning tokens per request effectively multiplied our per-query cost. In short, we're paying for a much longer response behind the scenes in exchange for higher answer quality, and we can manage this by tuning reasoning effort levels or reserving reasoning mode for complex tasks only.

출력 228 tok 지연 시간 6.7 s

DeepSeek V4 Flash (0731) 통과 · 3 sentences

Enabling reasoning mode prompts the model to generate extensive internal chain-of-thought tokens before answering, often multiplying total token output per query by several times. This directly inflates costs because we are billed per token, and these reasoning tokens are processed at a premium compute tier that carries a higher price per million tokens. However, this spend buys measurably higher accuracy and fewer failed calls, so we are tracking it against specific error-reduction KPIs to ensure the ROI justifies the increase.

출력 365 tok (+266 사고) 지연 시간 5.1 s

지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.

프롬프트 This function is supposed to return the longest run of consecutive equal items, but callers report it is off by one on single-element inputs and misses runs that end at the last index. Fix it and explain the bug in one paragraph. 검증 수정 후 테스트 통과

Claude Fable 5 통과 · 8/8 cases

## Fixed code ```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` ## Explanation The original function counts **adjacent equal pairs** rather than **items in a run**: a run of length *n* contains only *n − 1* equal neighbor pairs, so every result is off by one — a single-element list yields 0 instead of 1, and `[1, 2, 2]` yields 1 instead of 2 (which callers perceive as "missing" the run at the end). The fix is to initialize both `cur` and `best` to 1 (any nonempty list has a run of at least length 1), reset `cur` to 1 rather than 0 when

출력 531 tok 지연 시간 12.5 s

DeepSeek V4 Flash (0731) 통과 · 8/8 cases

```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The original bug stems from initializing `cur` to 0 and only incrementing it when adjacent elements are equal, which counts the number of *equal transitions* rather than the actual run length—so every run of length L is reported as L−1, and a single‑element run (with no transitions) yields 0. Moreover, because `best` is updated only inside the equality branch, it never accounts for a run that ends at the last element if that run is longer than any previously seen (though the real issue remains the off‑by‑one). […]

출력 1268 tok (+1016 사고) 지연 시간 14.0 s

수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.

프롬프트 Extract a JSON object with fields {company, quarter, revenue_usd_m, growth_pct, guidance} from this text. Use null for anything not stated; add no other fields. 검증 유효한 JSON, 스키마와 정확히 일치

Claude Fable 5 통과 · 5/5 fields, guidance null

```json { "company": "Meridian Robotics", "quarter": "Q3 (September quarter)", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on interpretation: "up eleven and change" is rendered as 11 (the precise figure isn't stated), and guidance is null because it was explicitly withheld.

출력 192 tok 지연 시간 6.5 s

DeepSeek V4 Flash (0731) 통과 · 5/5 fields, guidance null

{ "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": null, "guidance": null }

출력 1119 tok (+1072 사고) 지연 시간 12.3 s

스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.

프롬프트 Write a 120-word product announcement for an API gateway feature that caches prompts across providers. Forbidden words: "seamless", "unlock", "game-changer", "revolutionize", "empower". Exactly one sentence must be a question. 검증 120단어, 금지어 0개

Claude Fable 5 통과 · 120 words, 0 banned, 1 question

**Introducing Cross-Provider Prompt Caching for our API Gateway** Starting today, your repeated prompts are cached once and reused across OpenAI, Anthropic, Google, and any other provider you route through the gateway. Instead of paying full token costs every time your application sends the same system prompt or context block, the gateway detects matching prefixes and serves cached results in milliseconds. Why keep spending money and latency on identical requests? Early adopters report cost reductions of up to 60 percent on high-volume workloads, along with faster median response times. Configuration is simple: enable caching in your dashboard, set a TTL, and choose which routes participate. Cache entries are encrypted at rest and never shared between accounts. Available now on all plans.

출력 1173 tok 지연 시간 18.2 s

DeepSeek V4 Flash (0731) 실패 · 141 words, 0 banned, 1 question

**Introducing Prompt Cache for API Gateway** We are pleased to announce Prompt Cache, a new feature that stores and reuses identical prompt prefixes across all connected LLM providers. By automatically recognizing repeated requests, this cache reduces token consumption and lowers latency without altering your application logic. Whether you use OpenAI, Anthropic, or open-source models, the cache operates transparently, ensuring consistent behavior while cutting costs. Developers can configure cache TTL and scoping rules via a simple API call, giving you precise control over data freshness and privacy. This feature also minimizes redundant upstream calls, freeing provider rate limits for more critical workloads. Start caching today through the dashboard or CLI, and watch your operational expenses drop significantly. […]

출력 254 tok (+80 사고) 지연 시간 4.4 s

제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.

코드 한 줄로 모델 전환

아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.

from openai import OpenAI

client = OpenAI(
    base_url="https://synthorai.io/v1",
    api_key="sk-syn-...",
)

resp = client.chat.completions.create(
    model="claude-fable-5",
    # model="deepseek-v4-flash-0731",  # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
    messages=[{"role": "user", "content": "Summarize this diff"}],
    reasoning_effort="medium",
)
print(resp.choices[0].message.content)

API 키 받기 →

자주 묻는 질문

Claude Fable 5 vs DeepSeek V4 Flash (0731), 어느 쪽이 더 저렴한가요?

입력 / 1M 토큰 기준으로는 DeepSeek V4 Flash (0731) 쪽이 더 저렴합니다($0.44 대 $10, 23배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.

연동을 두 번 하지 않고도 Claude Fable 5 vs DeepSeek V4 Flash (0731) A/B 테스트를 할 수 있나요?

네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.

Claude Fable 5, DeepSeek V4 Flash (0731) 모두 프롬프트 캐싱을 지원하나요?

네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.

관련 비교

직접 측정한 자료