Claude Fable 5.1 vs DeepSeek V4 Flash (0731)
Claude Fable 5.1 모델은 초대제로 제공됩니다. 아래 수치는 실시간 요금이지만, 호출하려면 먼저 워크스페이스가 승인을 받아야 합니다. 이 비교를 바탕으로 개발을 시작하기 전에 저희에게 액세스를 요청해 주세요.
언제 어떤 모델을 쓸까
두 모델 모두 1,000,000 토큰 컨텍스트 창을 공유하므로, 차이는 비용과 모달리티입니다: claude-fable-5-1은 100만 입력 토큰당 $10, 100만 출력 토큰당 $50로, deepseek-v4-flash-0731의 $0.44 및 $1.32 대비 약 23x 및 38x의 비용이 듭니다. 텍스트와 함께 이미지 입력이 필요하거나, 비활성화할 수 없는 상시 활성화된 thinking 기능이 필요한 경우 claude-fable-5-1을 선택하세요. 대량의 텍스트 전용 채팅, 코드, 도구 및 추론 작업이 필요하거나 단일 응답이 매우 길어야 하는 경우에는 deepseek-v4-flash-0731을 선택하세요. 이 모델의 393216 최대 출력 토큰은 claude-fable-5-1에서 허용되는 128000 토큰의 약 3x입니다.
벤치마크
두 모델 모두 측정한 항목 5개.
공급자 공개 자료: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Fable 5.1 | DeepSeek V4 Flash (0731) | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $10 | $0.44 | 23× |
| 출력 / 1M 토큰 | $50 | $1.32 | 38× |
| 캐시 읽기 / 1M 토큰 | $0.25 | $0.044 | 5.7× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | 별도 요금 없음 | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 79개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| Claude Fable 5.1 | DeepSeek V4 Flash (0731) | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 항상 켜짐 | 지원(공급자가 조절 파라미터를 공개하지 않음) |
| 구조화된 출력 | 지원 | 지원 |
| 프롬프트 캐싱 | 명시적(접두사 직접 지정) | 암시적(자동) |
| 캐시 수명 | 5m default, 1h option | no fixed TTL (evicted when unused) |
| 최소 캐시 접두사 | 1024 토큰 | 미공개 |
사양
| Claude Fable 5.1 | DeepSeek V4 Flash (0731) | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-09-01 | 2026-07-31 |
| 지식 컷오프 | 2026-06 | - |
| 컨텍스트 윈도우 | 1M | 1M |
| 최대 출력 | 128K | 393K |
| 사고 파라미터 | output_config.effort (thinking is adaptive-only and always on) | - |
| 허용 값 | effort
| - |
| 기본값 | thinking always on (adaptive) effort
| - |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Fable 5.1 · DeepSeek V4 Flash (0731)
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
Claude Fable 5.1 통과 · 3 sentences
When we enabled reasoning, the model started generating a long chain of internal "thinking" tokens before producing each answer, and we're billed for those tokens at the same output rate even though users never see them. In practice, that hidden reasoning often runs several times longer than the visible response, so the total tokens per request roughly doubled while the number of requests stayed flat. The upside is measurably better accuracy on complex tasks, so the right conversation is whether that quality gain justifies the cost—and if not, we can restrict reasoning to the workflows that actually need it rather than turning it on globally.
출력 186 tok 지연 시간 3.2 s
DeepSeek V4 Flash (0731) 통과 · 3 sentences
Enabling reasoning mode prompts the model to generate extensive internal chain-of-thought tokens before answering, often multiplying total token output per query by several times. This directly inflates costs because we are billed per token, and these reasoning tokens are processed at a premium compute tier that carries a higher price per million tokens. However, this spend buys measurably higher accuracy and fewer failed calls, so we are tracking it against specific error-reduction KPIs to ensure the ROI justifies the increase.
출력 365 tok (+266 사고) 지연 시간 5.1 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
Claude Fable 5.1 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): cur = cur + 1 if xs[i] == xs[i - 1] else 1 best = max(best, cur) return best ``` The bug is that `cur` counts *matches between adjacent elements* rather than *elements in the run*: it starts at 0 and only increments when `xs[i] == xs[i-1]`, so a run of length k produces a count of k−1. That's why a single element returns 0 instead of 1, and why every other run also comes out one short — the "misses runs at the end" reports are the same off-by-one seen on inputs like `[1, 2, 2]`, where the trailing run of length 2 is reported as 1 (the original code does update `best` inside the loop, so end-of-list runs aren't actually skipped, just undercounted). […]
출력 882 tok (+507 사고) 지연 시간 3.4 s
DeepSeek V4 Flash (0731) 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The original bug stems from initializing `cur` to 0 and only incrementing it when adjacent elements are equal, which counts the number of *equal transitions* rather than the actual run length—so every run of length L is reported as L−1, and a single‑element run (with no transitions) yields 0. Moreover, because `best` is updated only inside the equality branch, it never accounts for a run that ends at the last element if that run is longer than any previously seen (though the real issue remains the off‑by‑one). […]
출력 1268 tok (+1016 사고) 지연 시간 14.0 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
Claude Fable 5.1 통과 · 5/5 fields, guidance null
```json { "company": "Meridian Robotics", "quarter": "Q3 (September quarter)", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on judgment calls (not part of the object): - **revenue_usd_m**: The text says "412 for the topline" but never states the currency or that the figure is in millions; it's also on a constant-currency basis and prefaced with "call it," so it's approximate. If you want strict literalism, this should be `null`. - **growth_pct**: "Eleven and change" means slightly above 11%; the exact figure isn't given. - **quarter**: "September quarter" is Q3 on a calendar basis, consistent with the reference to a pending Q4 close. - **guidance**: Explicitly withheld, so `null`.
출력 633 tok (+349 사고) 지연 시간 3.8 s
DeepSeek V4 Flash (0731) 통과 · 5/5 fields, guidance null
{ "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": null, "guidance": null }
출력 1119 tok (+1072 사고) 지연 시간 12.3 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
Claude Fable 5.1 통과 · 121 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching for the Gateway.** Starting today, your API gateway can cache prompts once and reuse them across OpenAI, Anthropic, Google, and any other provider you route to. Long system instructions, retrieval context, and few-shot examples are stored at the gateway layer, so switching models no longer means paying to resend the same tokens. Why send the same 8,000-token preamble to three different vendors when you could send it once? Our cache normalizes prompt segments, fingerprints them, and serves matching prefixes from memory before the request ever reaches an upstream API. Early customers report token costs falling by 30 to 60 percent on high-volume workloads, with median latency dropping alongside. Available today on all Team and Enterprise plans.
출력 1722 tok (+1463 사고) 지연 시간 2.9 s
DeepSeek V4 Flash (0731) 실패 · 141 words, 0 banned, 1 question
**Introducing Prompt Cache for API Gateway** We are pleased to announce Prompt Cache, a new feature that stores and reuses identical prompt prefixes across all connected LLM providers. By automatically recognizing repeated requests, this cache reduces token consumption and lowers latency without altering your application logic. Whether you use OpenAI, Anthropic, or open-source models, the cache operates transparently, ensuring consistent behavior while cutting costs. Developers can configure cache TTL and scoping rules via a simple API call, giving you precise control over data freshness and privacy. This feature also minimizes redundant upstream calls, freeing provider rate limits for more critical workloads. Start caching today through the dashboard or CLI, and watch your operational expenses drop significantly. […]
출력 254 tok (+80 사고) 지연 시간 4.4 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-fable-5-1",
# model="deepseek-v4-flash-0731", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-fable-5-1",
// model: "deepseek-v4-flash-0731", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-fable-5-1",
# "model": "deepseek-v4-flash-0731", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-fable-5-1",
// Model: "deepseek-v4-flash-0731", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-fable-5-1")
// .model("deepseek-v4-flash-0731") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
Claude Fable 5.1 vs DeepSeek V4 Flash (0731), 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 DeepSeek V4 Flash (0731) 쪽이 더 저렴합니다($0.44 대 $10, 23배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 Claude Fable 5.1 vs DeepSeek V4 Flash (0731) A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
Claude Fable 5.1, DeepSeek V4 Flash (0731) 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.