Claude Fable 5.1 vs Gemini 4 Argon
Claude Fable 5.1 모델은 초대제로 제공됩니다. 아래 수치는 실시간 요금이지만, 호출하려면 먼저 워크스페이스가 승인을 받아야 합니다. 이 비교를 바탕으로 개발을 시작하기 전에 저희에게 액세스를 요청해 주세요.
언제 어떤 모델을 쓸까
두 모델 모두 약 백만 토큰의 컨텍스트(claude-fable-5-1은 1000000 토큰, gemini-4-argon은 1048576 토큰)로 동작하지만 요금표에는 큰 차이가 있습니다. gemini-4-argon은 입력($10 대비 $2)과 출력($50 대비 $10)에서 5배 더 저렴하며, 캐시 읽기($0.25 대비 $0.1)에서 2.5배 더 저렴합니다. 비용이 가장 중요한 고려 사항이거나 입력에 오디오 또는 비디오가 포함되는 경우 gemini-4-argon을 선택하세요. claude-fable-5-1은 오디오나 비디오를 지원하지 않습니다. 최대 128000 토큰의 응답이 필요한 텍스트 및 이미지 작업에는 claude-fable-5-1을 선택하세요. 이는 gemini-4-argon의 65536 토큰보다 약 2배 더 큰 용량입니다.
벤치마크
Gemini 4 Argon: 공급자가 벤치마크 점수를 공개하지 않았습니다.
공급자 공개 자료: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Fable 5.1 | Gemini 4 Argon | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $10 | $2 | 5× |
| 출력 / 1M 토큰 | $50 | $10 | 5× |
| 캐시 읽기 / 1M 토큰 | $0.25 | $0.1 | 2.5× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | - | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 79개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| Claude Fable 5.1 | Gemini 4 Argon | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 항상 켜짐 | 지원(공급자가 조절 파라미터를 공개하지 않음) |
| 구조화된 출력 | 지원 | 지원 |
| 프롬프트 캐싱 | 명시적(접두사 직접 지정) | 암시적 + 명시적 |
| 캐시 수명 | 5m default, 1h option | 미공개 |
| 최소 캐시 접두사 | 1024 토큰 | 4096 토큰 |
사양
| Claude Fable 5.1 | Gemini 4 Argon | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 오디오 동영상 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-09-01 | 2026-10-13 |
| 지식 컷오프 | 2026-06 | 2026-03 |
| 컨텍스트 윈도우 | 1M | 1M |
| 최대 출력 | 128K | 66K |
| 사고 파라미터 | output_config.effort (thinking is adaptive-only and always on) | - |
| 허용 값 | effort
| - |
| 기본값 | thinking always on (adaptive) effort
| - |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: Claude Fable 5.1 · Gemini 4 Argon
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
Claude Fable 5.1 통과 · 3 sentences
When we enabled reasoning, the model started generating a long chain of internal "thinking" tokens before producing each answer, and we're billed for those tokens at the same output rate even though users never see them. In practice, that hidden reasoning often runs several times longer than the visible response, so the total tokens per request roughly doubled while the number of requests stayed flat. The upside is measurably better accuracy on complex tasks, so the right conversation is whether that quality gain justifies the cost—and if not, we can restrict reasoning to the workflows that actually need it rather than turning it on globally.
출력 186 tok 지연 시간 3.2 s
Gemini 4 Argon 통과 · 3 sentences
Enabling the reasoning feature forces the AI to generate an extensive, hidden "chain of thought" to solve complex problems before delivering the final answer. Because LLM providers bill us per token generated, we are now paying for thousands of these invisible "thinking" words on top of the standard visible output. While this doubles our raw usage costs per query, it represents an investment in significantly higher accuracy and drastically reduced error rates for our most critical tasks.
출력 91 tok 지연 시간 4.7 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
Claude Fable 5.1 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): cur = cur + 1 if xs[i] == xs[i - 1] else 1 best = max(best, cur) return best ``` The bug is that `cur` counts *matches between adjacent elements* rather than *elements in the run*: it starts at 0 and only increments when `xs[i] == xs[i-1]`, so a run of length k produces a count of k−1. That's why a single element returns 0 instead of 1, and why every other run also comes out one short — the "misses runs at the end" reports are the same off-by-one seen on inputs like `[1, 2, 2]`, where the trailing run of length 2 is reported as 1 (the original code does update `best` inside the loop, so end-of-list runs aren't actually skipped, just undercounted). […]
출력 882 tok (+507 사고) 지연 시간 3.4 s
Gemini 4 Argon 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The bug occurs because the original function counts the number of matching adjacent *pairs* rather than the actual number of *elements* in a run, causing all non-empty results to be off by one. Because a single element constitutes a valid run of length 1, initializing and resetting `cur` and `best` to `0` instead of `1` means the first element of any sequence is never counted; this causes single-element lists (where the loop doesn't run) to wrongly return `0` and makes it seem like runs at the end are missed because a pair of matching elements only increments `cur` to `1` instead of `2`. […]
출력 286 tok 지연 시간 7.5 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
Claude Fable 5.1 통과 · 5/5 fields, guidance null
```json { "company": "Meridian Robotics", "quarter": "Q3 (September quarter)", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on judgment calls (not part of the object): - **revenue_usd_m**: The text says "412 for the topline" but never states the currency or that the figure is in millions; it's also on a constant-currency basis and prefaced with "call it," so it's approximate. If you want strict literalism, this should be `null`. - **growth_pct**: "Eleven and change" means slightly above 11%; the exact figure isn't given. - **quarter**: "September quarter" is Q3 on a calendar basis, consistent with the reference to a pending Q4 close. - **guidance**: Explicitly withheld, so `null`.
출력 633 tok (+349 사고) 지연 시간 3.8 s
Gemini 4 Argon 통과 · 5/5 fields, guidance "withheld pending the Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": null, "growth_pct": "eleven and change", "guidance": "withheld pending the Q4 close" } ```
출력 68 tok 지연 시간 5.8 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
Claude Fable 5.1 통과 · 121 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching for the Gateway.** Starting today, your API gateway can cache prompts once and reuse them across OpenAI, Anthropic, Google, and any other provider you route to. Long system instructions, retrieval context, and few-shot examples are stored at the gateway layer, so switching models no longer means paying to resend the same tokens. Why send the same 8,000-token preamble to three different vendors when you could send it once? Our cache normalizes prompt segments, fingerprints them, and serves matching prefixes from memory before the request ever reaches an upstream API. Early customers report token costs falling by 30 to 60 percent on high-volume workloads, with median latency dropping alongside. Available today on all Team and Enterprise plans.
출력 1722 tok (+1463 사고) 지연 시간 2.9 s
Gemini 4 Argon 통과 · 120 words, 0 banned, 1 question
Are you paying twice for the exact same AI responses? Today, we are introducing Cross-Provider Prompt Caching for our API gateway, a new feature designed to reduce your artificial intelligence infrastructure costs and latency. When your applications send identical prompts to different large language models, our gateway now intercepts the request and serves a verified, cached response in milliseconds. It works across OpenAI, Anthropic, and open-source models simultaneously. If your primary provider experiences an outage, your fallback model still benefits from the shared cache Layer, preventing expensive redundant computations. Engineering teams can configure custom time-to-live settings, set similarity thresholds, and monitor cache hit rates directly from the dashboard. Activate Cross-Provider Prompt Caching in your gateway settings today and start saving.
출력 156 tok 지연 시간 6.3 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-fable-5-1",
# model="gemini-4-argon", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-fable-5-1",
// model: "gemini-4-argon", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-fable-5-1",
# "model": "gemini-4-argon", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-fable-5-1",
// Model: "gemini-4-argon", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-fable-5-1")
// .model("gemini-4-argon") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
Claude Fable 5.1 vs Gemini 4 Argon, 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 Gemini 4 Argon 쪽이 더 저렴합니다($2 대 $10, 5.0배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 Claude Fable 5.1 vs Gemini 4 Argon A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
Claude Fable 5.1, Gemini 4 Argon 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.