DeepSeek V4.1 Flash vs GLM-5.3-Flash
什么时候选哪个
两者均运行 1000000-token 的上下文,缓存读取价格均为相同的 $0.03,因此区别在于输出长度和输入:deepseek-v4.1-flash 允许高达 393216 个输出 token(是 glm-5.3-flash 163840 个的 2.4x),输入和输出价格分别为 $0.3 和 $1.2,而 glm-5.3-flash 的输入价格减半为 $0.15,输出价格便宜 2.4x 为 $0.5。如果你需要超长单次生成,请选择 deepseek-v4.1-flash;如果需要更便宜的高请求量文本和图像工作,或者需要视频输入,请选择 glm-5.3-flash,但请注意其思考模式无法被关闭。
Benchmark 成绩
5 项两边都有成绩。
供应商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
价格
| DeepSeek V4.1 Flash | GLM-5.3-Flash | Δ | |
|---|---|---|---|
| 输入 / 1M token | $0.3 | $0.15 | 2× |
| 输出 / 1M token | $1.2 | $0.5 | 2.4× |
| 缓存读取 / 1M token | $0.03 | $0.03 | = |
| 缓存写入 | 不单独收费 | - | - |
价格取自构建时的实时目录,最新价格见各模型页面。
两个模型所处的位置:全部 77 个按同一单位计费的聊天模型的每 1M token 输入价分布(对数刻度)
能力
| DeepSeek V4.1 Flash | GLM-5.3-Flash | |
|---|---|---|
| 工具调用 | 是 | 是 |
| 思考控制 | 是,但供应商未公布调节参数 | 始终开启 |
| 结构化输出 | - | 是 |
| 提示词缓存 | 隐式(自动) | 隐式(自动) |
| 缓存有效期 | no fixed TTL (evicted when unused) | 未公布 |
| 最小缓存前缀 | 未公布 | 未公布 |
规格
| DeepSeek V4.1 Flash | GLM-5.3-Flash | |
|---|---|---|
| 输入模态 | 文本 图像 | 文本 图像 视频 |
| 输出模态 | 文本 | 文本 |
| 发布日期 | 2026-09-10 | 2026-08-26 |
| 上下文窗口 | 1M | 1M |
| 最大输出 | 393K | 164K |
| 思考参数 | - | reasoning_effort |
| 可选值 | - | reasoning_effort
|
| 默认值 | - | max |
规格照录自各供应商的文档;供应商没有公布的项目,对应的行直接省略,不做推断。 完整来源: DeepSeek V4.1 Flash · GLM-5.3-Flash
同一条提示词,两个模型,经网关实测
DeepSeek V4.1 Flash 通过 · 3 sentences
Enabling reasoning changed the unit economics: the model now spends extra billable tokens internally to “think” before producing the answer, and those reasoning tokens are charged like output tokens even though users never see them. That added token generation—plus longer contexts and occasional retries on harder prompts—roughly doubled our cost per request. We can control this by capping reasoning depth, routing only complex queries to reasoning models, and caching common prompts to bring the bill back down.
输出 423 tok (+327 思考) 延迟 14.6 s
GLM-5.3-Flash 通过 · 3 sentences
Enabling reasoning means the model now generates thousands of invisible "thinking" tokens before each visible answer, and we're billed for those hidden tokens at full output rates—our most expensive tier. Since output tokens cost 3–5x more than input tokens, that hidden thinking volume compounds across every request, which is why the bill doubled rather than edged up. If the spend concerns you, the fix is straightforward: route only complex queries to reasoning models and keep simple tasks on standard ones, which can reclaim a meaningful share of that cost without losing accuracy where it matters.
输出 742 tok (+626 思考) 延迟 23.2 s
指令遵循(恰好三句,数得出来)、受众适配(对 CFO 说话的口吻),以及下方 token 计数暴露出的隐藏思考计费差额。
DeepSeek V4.1 Flash 通过 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` is counting equal adjacent pairs, not elements in the current run: every time `xs[i] == xs[i - 1]`, the run length increases by one element, but the first element of the run was never counted, so all runs are undercounted by one. Also, `best` starts at `0`, so single-element inputs return `0` instead of `1`, and a one-element run ending at the last index is missed entirely.
输出 918 tok (+733 思考) 延迟 11.4 s
GLM-5.3-Flash 通过 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` **The bug:** `cur` is supposed to hold the length of the current run, but it's seeded with `0` and reset to `0` on a mismatch instead of `1` — and since the loop starts at index 1, the first element of every run never passes through the `==` branch and so never gets counted at all. That means `cur` actually holds *run length minus 1* for every run, so every run is underreported by one: a single-element input never enters the loop and returns 0 instead of 1, and a run of length n returns n − 1 (e.g., `[3, 3, 3]` returns 2). […]
输出 2462 tok (+2138 思考) 延迟 29.1 s
修复是否真的正确(能运行)、解释的信息密度,以及在一个范围明确的任务上的 token 效率。
DeepSeek V4.1 Flash 通过 · 5/5 fields, guidance "withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11.0,"guidance":"withheld pending the Q4 close"}
输出 1707 tok (+1667 思考) 延迟 15.1 s
GLM-5.3-Flash 通过 · 5/5 fields, guidance "Withheld pending the Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending the Q4 close" } ``` Notes on judgment calls: revenue of 412 is on a constant-currency basis as stated; growth of "eleven and change" is approximated as 11 since no precise figure is given.
输出 717 tok (+616 思考) 延迟 9.1 s
是否严守 schema(不臆造字段)、能否顶住幻觉压力(原文明说暂不给出 guidance),以及结构化输出路径的差异。
DeepSeek V4.1 Flash 通过 · 116 words, 0 banned, 1 question
Today we're launching Cross-Provider Prompt Cache for our API gateway. It stores identical prompt requests and their responses across supported model providers, then serves cached results when a match is found. Teams can cut duplicate inference costs, reduce latency, and keep behavior consistent during provider failover. The cache works with configurable TTLs, per-route rules, and cache-key controls, so you decide what is reusable and what must stay fresh. Does your application send the same prompts to multiple providers? Now your gateway can answer many of those calls without another upstream request. Existing observability dashboards show hit rates, saved tokens, and estimated spend reduction. Enable it in the gateway console, set your policy, and start caching today.
输出 917 tok (+770 思考) 延迟 9.0 s
GLM-5.3-Flash 通过 · 120 words, 0 banned, 1 question
Introducing Cross-Provider Prompt Cache, the newest feature in our API gateway. Today, teams send identical prompts to multiple LLM providers and pay full price each time. Why duplicate that work and cost? With Cross-Provider Prompt Cache, your gateway stores prompt-response pairs and serves repeated requests from cache, regardless of which provider handles the call. The result: lower latency, reduced spend, and consistent outputs across OpenAI, Anthropic, Google, and self-hosted models. Configure cache policies per route, set TTLs, and invalidate entries instantly through the dashboard or API. Built-in analytics show hit rates and savings in real time. Enable the cache with a single flag, no code changes required. Available today on all paid plans. Contact sales for enterprise volume pricing details.
输出 2095 tok (+1937 思考) 延迟 20.2 s
是否守住约束(字数预算、禁用词表、只能有一个问句)、文风特征,以及长度控制。
改一行代码就能在两个模型之间切换
下方每个标签页里都有两个模型 ID,高亮的那两行是唯一要改的地方。端点不变,API key 不变,请求结构也不变。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="deepseek-v4.1-flash",
# model="glm-5.3-flash", # 取消注释此行,注释上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "deepseek-v4.1-flash",
// model: "glm-5.3-flash", // 取消注释此行,注释上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "deepseek-v4.1-flash",
# "model": "glm-5.3-flash", # 取消注释此行,注释上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "deepseek-v4.1-flash",
// Model: "glm-5.3-flash", // 取消注释此行,注释上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("deepseek-v4.1-flash")
// .model("glm-5.3-flash") // 取消注释此行,注释上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常见问题
DeepSeek V4.1 Flash 和 GLM-5.3-Flash 哪个更便宜?
按「输入 / 1M token」算,GLM-5.3-Flash 更便宜($0.15 对 $0.3,相差 2.0×)。其他计费项的结论可能相反,完整价格见上方表格,实际成本取决于你的用量构成。
不用分别集成两次,就能对 DeepSeek V4.1 Flash 和 GLM-5.3-Flash 做 A/B 测试吗?
可以。两个模型走同一个 OpenAI 兼容端点,用同一个 API key,切换时只要改一行里的模型名,所以可以给两个模型各分一部分流量,直接对比账单。
DeepSeek V4.1 Flash 和 GLM-5.3-Flash 支持提示词缓存吗?
支持。两个模型的缓存读取价都低于各自的输入价,所以前缀能反复命中缓存的负载,实际成本会比按官网价估算的低。具体的缓存读取价见上方价格表。