DeepSeek V4.1 Flash vs Kimi K3
何時用哪一個
兩者在約一百萬 tokens 的上下文中皆接受文字與影像輸入（deepseek-v4.1-flash 為 1000000，kimi-k3 為 1048576），因此差異在於成本和特性而非覆蓋範圍：kimi-k3 收取 $3 的輸入和 $15 的輸出費用，而另一方為 $0.3 和 $1.2，這使其價格在輸入為 10x，輸出為 12.5x，且快取讀取為 $0.3 對比 $0.03。當你需要影片輸入或高達 1048576 tokens 的單次回覆時，請選擇 kimi-k3，並注意其思考功能無法停用；當 393216 個輸出 tokens 已足夠應付大量文字與影像工作時，請選擇 deepseek-v4.1-flash。
Benchmark 成績
雙方都被測過的 16 項,1 項打平。
廠商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
定價
| DeepSeek V4.1 Flash | Kimi K3 | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $0.3 | $3 | 0.1× |
| 輸出 / 1M tokens | $1.2 | $15 | 0.08× |
| 快取讀取 / 1M tokens | $0.03 | $0.3 | 0.1× |
| 快取寫入 | 不額外計費 | - | - |
費率取自建置時的即時目錄；各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下，所有 69 個 聊天 模型的 每 1M tokens 的輸入價格（對數尺度）
能力
| DeepSeek V4.1 Flash | Kimi K3 | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 是 —— 廠商未公布調節參數 | 常駐開啟 |
| 結構化輸出 | - | 是 |
| 提示快取 | 隱式（自動） | 隱式（自動） |
| 快取生命週期 | no fixed TTL (evicted when unused) | 未公開 |
| 最小快取前綴 | 未公開 | 未公開 |
規格
| DeepSeek V4.1 Flash | Kimi K3 | |
|---|---|---|
| 輸入模態 | 文字 影像 | 文字 影像 影片 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-09-10 | - |
| 上下文視窗 | 1M | 1M |
| 最大輸出 | 393K | 1M |
| 思考參數 | - | reasoning_effort (top-level; the thinking object is not accepted) |
| 可接受的值 | - | reasoning_effort
|
| 預設值 | - | max |
規格摘錄自各供應商的文件；供應商未發布的資料列會直接省略，而非自行推測。 完整來源： DeepSeek V4.1 Flash · Kimi K3
單一提示詞，兩款模型 — 經由閘道測量
DeepSeek V4.1 Flash 通過 · 3 sentences
Enabling reasoning changed the unit economics: the model now spends extra billable tokens internally to “think” before producing the answer, and those reasoning tokens are charged like output tokens even though users never see them. That added token generation—plus longer contexts and occasional retries on harder prompts—roughly doubled our cost per request. We can control this by capping reasoning depth, routing only complex queries to reasoning models, and caching common prompts to bring the bill back down.
輸出 423 tok (+327 思考) 延遲 14.6 s
Kimi K3 通過 · 3 sentences
Reasoning models don't just answer questions—they "think" first, generating long internal chains of step-by-step logic before producing a response. Those hidden thinking steps are billed as output tokens (the most expensive kind, typically 3–5x the price of input tokens), and a single query can generate thousands of them even when the visible answer is only a paragraph long. So you're paying for dramatically more compute per request: the bill doubled because the model does far more work behind the scenes, not because usage increased.
輸出 755 tok (+637 思考) 延遲 20.8 s
指令遵循（恰好三句，可數）、受眾適配（面向 CFO 的語氣），以及下方 token 計量所暴露的隱藏思考計費缺口。
DeepSeek V4.1 Flash 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` is counting equal adjacent pairs, not elements in the current run: every time `xs[i] == xs[i - 1]`, the run length increases by one element, but the first element of the run was never counted, so all runs are undercounted by one. Also, `best` starts at `0`, so single-element inputs return `0` instead of `1`, and a one-element run ending at the last index is missed entirely.
輸出 918 tok (+733 思考) 延遲 11.4 s
Kimi K3 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The bug is a fencepost error: `cur` counts *matching adjacent pairs* rather than *items in the run*, because it starts at 0 and only increments when `xs[i] == xs[i - 1]`. A run of length L contains L−1 equal pairs, so every run was undercounted by exactly one. For a single-element list (a run of length 1) the loop never runs and the function returns 0 instead of 1; likewise any run ending at the last index — e.g. the two `2`s in `[1, 2, 2]` — reported 1 instead of 2, making it look like no run existed at all. […]
輸出 1837 tok (+1547 思考) 延遲 47.2 s
修復是否真的正確（可執行）、解釋的資訊密度，以及在一個邊界明確的任務上的 token 效率。
DeepSeek V4.1 Flash 通過 · 5/5 fields, guidance "withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11.0,"guidance":"withheld pending the Q4 close"}
輸出 1707 tok (+1667 思考) 延遲 15.1 s
Kimi K3 通過 · 5/5 fields, guidance null
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null }
輸出 924 tok (+863 思考) 延遲 25.9 s
schema 服從度（不臆造欄位）、幻覺壓力（guidance 明確被暫緩給出），以及結構化輸出路徑的差異。
DeepSeek V4.1 Flash 通過 · 116 words, 0 banned, 1 question
Today we're launching Cross-Provider Prompt Cache for our API gateway. It stores identical prompt requests and their responses across supported model providers, then serves cached results when a match is found. Teams can cut duplicate inference costs, reduce latency, and keep behavior consistent during provider failover. The cache works with configurable TTLs, per-route rules, and cache-key controls, so you decide what is reusable and what must stay fresh. Does your application send the same prompts to multiple providers? Now your gateway can answer many of those calls without another upstream request. Existing observability dashboards show hit rates, saved tokens, and estimated spend reduction. Enable it in the gateway console, set your policy, and start caching today.
輸出 917 tok (+770 思考) 延遲 9.0 s
Kimi K3 通過 · 120 words, 0 banned, 1 question
Meet Prompt Cache, a new API gateway capability that stores prompt responses and serves them across OpenAI, Anthropic, Google, and Azure endpoints. It matches requests by model, prompt hash, tools, temperature, and tenant policy, so repeated work returns fast while sensitive contexts stay isolated. Teams set TTLs, stale rules, encryption scopes, and bypass flags per route. Analytics show hit rate, latency saved, token spend avoided, and drift risk by provider. What changes for developers? Keep one integration, add cache headers, and watch fallback logic respect consent, residency, and audit needs. During rollout, canary keys compare fresh answers with cached copies before promotion. Prompt Cache cuts vendor calls, steadies p95 latency, and gives platform owners controls for cost, quality, and compliance.
輸出 1527 tok (+1354 思考) 延遲 37.9 s
約束服從度（字數預算、禁用詞表、唯一的那句問句）、文風指紋，以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點，相同的金鑰，相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="deepseek-v4.1-flash",
# model="kimi-k3", # 取消註解此行，並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "deepseek-v4.1-flash",
// model: "kimi-k3", // 取消註解此行，並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "deepseek-v4.1-flash",
# "model": "kimi-k3", # 取消註解此行，並註解上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "deepseek-v4.1-flash",
// Model: "kimi-k3", // 取消註解此行，並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("deepseek-v4.1-flash")
// .model("kimi-k3") // 取消註解此行，並註解上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
DeepSeek V4.1 Flash 和 Kimi K3 哪個比較便宜？
DeepSeek V4.1 Flash 在 輸入 / 1m tokens 上較便宜（$0.3 對比 $3，相差 10×）。其他項目可能呈現相反結果 — 上表提供完整資訊，實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下，對 DeepSeek V4.1 Flash 和 Kimi K3 進行 A/B 測試嗎？
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務，並使用同一把 API 金鑰 — 切換只需更改一行的模型字串，因此您可以將部分流量分別導向兩者並直接比較帳單。
DeepSeek V4.1 Flash 與 Kimi K3 支援提示快取嗎？
是的 — 兩者的快取讀取費率皆低於其輸入費率，因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。