Claude Opus 5 vs Kimi K3
何時該用哪一個 — 綜合評斷,而非基準測試數據表
兩者皆接受文字與圖像輸入並回傳文字,涵蓋大約一百萬個 token 的上下文長度(claude-opus-5 為 1000000,kimi-k3 為 1048576),因此差異在於其他方面:kimi-k3 的費用為輸入 $3 與輸出 $15,對比 $5 與 $25,使 claude-opus-5 每個 token 約貴上 1.67x,此外 kimi-k3 也接受影片,且可輸出高達 1048576 個輸出 token,對比於 128000。追求較便宜的執行成本、影片輸入,或非常長的單次生成時,請選擇 kimi-k3。當您需要其思考能力以及關閉思考功能的選項時(這點是 kimi-k3 不允許的),請選擇 claude-opus-5。
定價
| Claude Opus 5 | Kimi K3 | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $5 | $3 | 1.7× |
| 輸出 / 1M tokens | $25 | $15 | 1.7× |
| 快取讀取 / 1M tokens | $0.5 | $0.3 | 1.7× |
| 快取寫入 | 1.25x (5m) / 2x (1h) | — | — |
費率取自建置時的即時目錄;各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下,所有 63 個 聊天 模型的 每 1M tokens 的輸入價格(對數尺度)
能力
| Claude Opus 5 | Kimi K3 | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 可配置 | 常駐開啟 |
| 結構化輸出 | 是 | 是 |
| 提示快取 | 顯式(由您標記前綴) | 隱式(自動) |
| 快取生命週期 | 5m default, 1h option | 未公開 |
| 最小快取前綴 | 1024 個 token | 未公開 |
規格
| Claude Opus 5 | Kimi K3 | |
|---|---|---|
| 輸入模態 | 文字 影像 | 文字 影像 影片 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-07-24 | — |
| 知識截止日期 | 2026-05 | — |
| 上下文視窗 | 1M | 1M |
| 最大輸出 | 128K | 1M |
| 思考參數 |
| reasoning_effort (top-level; the thinking object is not accepted) |
| 可接受的值 | thinking.type
effort
| reasoning_effort
|
| 預設值 | thinking on effort
| max |
規格摘錄自各供應商的文件;供應商未發布的資料列會直接省略,而非自行推測。 完整來源: Claude Opus 5 · Kimi K3
單一提示詞,兩款模型 — 經由閘道測量
Claude Opus 5 通過 · 3 sentences
When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.
輸出 529 tok 延遲 9.0 s
Kimi K3 通過 · 3 sentences
Reasoning models don't just answer questions—they "think" first, generating long internal chains of step-by-step logic before producing a response. Those hidden thinking steps are billed as output tokens (the most expensive kind, typically 3–5x the price of input tokens), and a single query can generate thousands of them even when the visible answer is only a paragraph long. So you're paying for dramatically more compute per request: the bill doubled because the model does far more work behind the scenes, not because usage increased.
輸出 755 tok (+637 思考) 延遲 20.8 s
指令遵循(恰好三句,可數)、受眾適配(面向 CFO 的語氣),以及下方 token 計量所暴露的隱藏思考計費缺口。
Claude Opus 5 通過 · 8/8 cases
## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]
輸出 1094 tok 延遲 16.1 s
Kimi K3 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` The bug is a fencepost error: `cur` counts *matching adjacent pairs* rather than *items in the run*, because it starts at 0 and only increments when `xs[i] == xs[i - 1]`. A run of length L contains L−1 equal pairs, so every run was undercounted by exactly one. For a single-element list (a run of length 1) the loop never runs and the function returns 0 instead of 1; likewise any run ending at the last index — e.g. the two `2`s in `[1, 2, 2]` — reported 1 instead of 2, making it look like no run existed at all. […]
輸出 1837 tok (+1547 思考) 延遲 47.2 s
修復是否真的正確(可執行)、解釋的資訊密度,以及在一個邊界明確的任務上的 token 效率。
Claude Opus 5 通過 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.
輸出 539 tok 延遲 7.6 s
Kimi K3 通過 · 5/5 fields, guidance null
{ "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null }
輸出 924 tok (+863 思考) 延遲 25.9 s
schema 服從度(不臆造欄位)、幻覺壓力(guidance 明確被暫緩給出),以及結構化輸出路徑的差異。
Claude Opus 5 通過 · 123 words, 0 banned, 1 question
**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.
輸出 1593 tok 延遲 19.1 s
Kimi K3 通過 · 120 words, 0 banned, 1 question
Meet Prompt Cache, a new API gateway capability that stores prompt responses and serves them across OpenAI, Anthropic, Google, and Azure endpoints. It matches requests by model, prompt hash, tools, temperature, and tenant policy, so repeated work returns fast while sensitive contexts stay isolated. Teams set TTLs, stale rules, encryption scopes, and bypass flags per route. Analytics show hit rate, latency saved, token spend avoided, and drift risk by provider. What changes for developers? Keep one integration, add cache headers, and watch fallback logic respect consent, residency, and audit needs. During rollout, canary keys compare fresh answers with cached copies before promotion. Prompt Cache cuts vendor calls, steadies p95 latency, and gives platform owners controls for cost, quality, and compliance.
輸出 1527 tok (+1354 思考) 延遲 37.9 s
約束服從度(字數預算、禁用詞表、唯一的那句問句)、文風指紋,以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點,相同的金鑰,相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5",
# model="kimi-k3", # 取消註解此行,並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5",
// model: "kimi-k3", // 取消註解此行,並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5",
# "model": "kimi-k3", # 取消註解此行,並註解上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5",
// Model: "kimi-k3", // 取消註解此行,並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5")
// .model("kimi-k3") // 取消註解此行,並註解上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
Claude Opus 5 和 Kimi K3 哪個比較便宜?
Kimi K3 在 輸入 / 1m tokens 上較便宜($3 對比 $5,相差 1.7×)。其他項目可能呈現相反結果 — 上表提供完整資訊,實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下,對 Claude Opus 5 和 Kimi K3 進行 A/B 測試嗎?
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務,並使用同一把 API 金鑰 — 切換只需更改一行的模型字串,因此您可以將部分流量分別導向兩者並直接比較帳單。
Claude Opus 5 與 Kimi K3 支援提示快取嗎?
是的 — 兩者的快取讀取費率皆低於其輸入費率,因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。