Claude Opus 5.5 vs Gemini 3.7 Flash
何時用哪一個
claude-opus-5-5 的每個 token 成本在輸入（$4 對 $0.75）和輸出（$20 對 $3.75）上都大約貴 5.3x，換來的是無法停用的常時開啟思考功能加上 128000 個 token 的最大輸出，因此如果是文字與影像的推理任務，且答案需要足夠的生成空間，請選擇它。gemini-3.7-flash 接受音訊和影片以及文字與影像，擁有稍微大一點的 1048576-token 上下文，且快取讀取為每百萬 $0.075，對手則是 $0.2，因此在 65536-token 輸出上限足夠的情況下，它是高流量多模態傳輸的首選。
Benchmark 成績
廠商公布: Alibaba (Qwen) Anthropic DeepSeek Google Moonshot OpenAI Tencent Z.ai
定價
| Claude Opus 5.5 | Gemini 3.7 Flash | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $4 | $0.75 | 5.3× |
| 輸出 / 1M tokens | $20 | $3.75 | 5.3× |
| 快取讀取 / 1M tokens | $0.2 | $0.075 | 2.7× |
| 快取寫入 | 1.25x (5m) / 2x (1h) | - | - |
費率取自建置時的即時目錄；各模型頁面皆附有目前的費率卡。
它們的相對位置 — 在此計費單位下，所有 74 個 聊天 模型的 每 1M tokens 的輸入價格（對數尺度）
能力
| Claude Opus 5.5 | Gemini 3.7 Flash | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 常駐開啟 | 是 —— 廠商未公布調節參數 |
| 結構化輸出 | 是 | 是 |
| 提示快取 | 顯式（由您標記前綴） | 隱式 + 顯式 |
| 快取生命週期 | 5m default, 1h option | 未公開 |
| 最小快取前綴 | 1024 個 token | 4096 個 token |
規格
| Claude Opus 5.5 | Gemini 3.7 Flash | |
|---|---|---|
| 輸入模態 | 文字 影像 | 文字 影像 音訊 影片 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-09-22 | 2026-08-13 |
| 知識截止日期 | 2026-06 | 2026-03 |
| 上下文視窗 | 1M | 1M |
| 最大輸出 | 128K | 66K |
| 思考參數 | output_config.effort | - |
| 可接受的值 | output_config.effort
| - |
| 預設值 | medium | - |
規格摘錄自各供應商的文件；供應商未發布的資料列會直接省略，而非自行推測。 完整來源： Claude Opus 5.5 · Gemini 3.7 Flash
單一提示詞，兩款模型 — 經由閘道測量
Claude Opus 5.5 通過 · 3 sentences
When we turned on reasoning, the model began "thinking out loud" before each answer, generating thousands of internal working tokens that users never see but that we are billed for just like the final response. Those hidden tokens are charged at the output rate, typically the most expensive rate, so the same question with the same visible answer now costs roughly twice as much or more. We can bring the bill back down without losing the quality gains by capping the reasoning budget and reserving reasoning mode for the complex tasks that actually benefit from it.
輸出 263 tok (+102 思考) 延遲 5.7 s
Gemini 3.7 Flash 通過 · 3 sentences
Enabling reasoning causes the model to generate a high volume of invisible "thinking tokens" behind the scenes to deliberate and solve complex logic before delivering a final response. Because our vendor bills strictly on token volume, this additional internal computation effectively doubled our billable output per query. In short, our costs increased because we are now paying for the extra compute capacity required to produce significantly higher-accuracy answers.
輸出 878 tok (+799 思考) 延遲 6.9 s
指令遵循（恰好三句，可數）、受眾適配（面向 CFO 的語氣），以及下方 token 計量所暴露的隱藏思考計費缺口。
Claude Opus 5.5 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` **Explanation:** The original code counted *matching adjacent pairs* rather than *items in a run*. Both `cur` and `best` started at 0, and `cur` reset to 0 on a mismatch, so a run of length *n* was reported as *n − 1*. For a single-element list the loop never executes, so it returned 0 instead of 1. For `[5, 5]` it returned 1 instead of 2. The fix treats every element as the start of a run of length 1: `best` and `cur` start at 1, and `cur` resets to 1 (not 0) when the value changes. An explicit check returns 0 for an empty list. The "misses runs at the last index" reports are the same off-by-one bug rather than a separate one. […]
輸出 723 tok (+303 思考) 延遲 10.4 s
Gemini 3.7 Flash 通過 · 8/8 cases
Here is the corrected function: ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` ### Explanation of the Bug The original function tracked equal adjacent transitions instead of the actual number of elements in a run, causing all non-empty run lengths to be undercounted by one (e.g., returning `0` instead of `1` for single-element lists because the loop never executes, and `1` instead of `2` for pairs). Initializing both `best` and `cur` to `1` (after handling empty inputs) and resetting `cur` to `1` on a mismatch ensures every individual element is counted as a valid run of at least length one.
輸出 1050 tok (+827 思考) 延遲 6.4 s
修復是否真的正確（可執行）、解釋的資訊密度，以及在一個邊界明確的任務上的 token 效率。
Claude Opus 5.5 通過 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` **Judgment calls to check:** - **quarter**: Kept as "September quarter" rather than "Q3", since the fiscal calendar isn't stated. The text mentions an upcoming "Q4 close," so it may be fiscal Q3, but that's not certain. - **revenue_usd_m**: The text says only "412 for the topline." It doesn't state currency or units, and the figure is on a constant-currency basis, not reported USD. USD millions is an assumption. Use `null` if you need strictly stated values. - **growth_pct**: The source says "eleven and change," so the true figure is slightly above 11. 11 is an approximation. - **guidance**: Guidance was explicitly withheld. I recorded that rather than `null`, since the text addresses it directly.
輸出 829 tok (+488 思考) 延遲 10.9 s
Gemini 3.7 Flash 通過 · 5/5 fields, guidance "withheld"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": null, "guidance": "withheld" } ```
輸出 918 tok (+858 思考) 延遲 6.2 s
schema 服從度（不臆造欄位）、幻覺壓力（guidance 明確被暫緩給出），以及結構化輸出路徑的差異。
Claude Opus 5.5 通過 · 120 words, 0 banned, 1 question
Today we're launching Cross-Provider Prompt Caching for our API gateway. Why pay twice for the same context? Our gateway now stores repeated prompt prefixes, system instructions, and document chunks, then reuses them whether your request goes to OpenAI, Anthropic, Google, or an open-source model. Teams running retrieval pipelines or long agent loops can cut token costs by up to 60 percent and trim latency on every cached call. Setup takes one configuration flag; no code changes are required. Cache rules respect tenant boundaries, expire on your schedule, and log every hit for audit review. Dashboards show savings by provider, route, and application in real time. Cross-Provider Prompt Caching is available on all Pro and Enterprise plans. Turn it on today.
輸出 1263 tok (+1007 思考) 延遲 13.5 s
Gemini 3.7 Flash 通過 · 120 words, 0 banned, 1 question
Why pay twice for identical AI queries simply because you routed them to different model vendors? Today, we introduce Universal Prompt Caching directly within our unified API gateway architecture. This capability stores repeated prompt contexts across OpenAI, Anthropic, and local models, instantly returning stored results to eliminate redundant computation fees. When your application sends an LLM request, the gateway inspects the payload, identifies semantic matches, and returns accurate cached responses in under ten milliseconds. Engineering teams can now slash inference latency by eighty percent while dramatically reducing monthly token expenditures across diverse production deployments. You retain complete privacy control, flexible cache eviction policies, and granular metrics through a single dashboard. Update your routing settings today to accelerate overall system performance.
輸出 2858 tok (+2718 思考) 延遲 14.1 s
約束服從度（字數預算、禁用詞表、唯一的那句問句）、文風指紋，以及長度控制。
只需一行程式碼即可在兩者間切換
以下每個頁籤中都有這兩個 ID — 醒目提示的這兩行是唯一的修改處。相同的端點，相同的金鑰，相同的請求結構。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5-5",
# model="gemini-3.7-flash", # 取消註解此行，並註解上一行
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5-5",
// model: "gemini-3.7-flash", // 取消註解此行，並註解上一行
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5-5",
# "model": "gemini-3.7-flash", # 取消註解此行，並註解上一行
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5-5",
// Model: "gemini-3.7-flash", // 取消註解此行，並註解上一行
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5-5")
// .model("gemini-3.7-flash") // 取消註解此行，並註解上一行
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
Claude Opus 5.5 和 Gemini 3.7 Flash 哪個比較便宜？
Gemini 3.7 Flash 在 輸入 / 1m tokens 上較便宜（$0.75 對比 $4，相差 5.3×）。其他項目可能呈現相反結果 — 上表提供完整資訊，實際成本取決於您的使用組合。
我可以在不進行兩次整合的情況下，對 Claude Opus 5.5 和 Gemini 3.7 Flash 進行 A/B 測試嗎？
可以。兩者皆透過同一個相容 OpenAI 的端點提供服務，並使用同一把 API 金鑰 — 切換只需更改一行的模型字串，因此您可以將部分流量分別導向兩者並直接比較帳單。
Claude Opus 5.5 與 Gemini 3.7 Flash 支援提示快取嗎？
是的 — 兩者的快取讀取費率皆低於其輸入費率，因此具有暖前綴的工作負載成本會低於牌價所示。確切的快取讀取列請見上方的定價表。