Claude Fable 5.1 vs DeepSeek V4.1 Flash (1017)
Claude Fable 5.1 採邀請制。下方的數字是即時費率,但要先取得工作空間的授權才能呼叫;如果你打算依據這份比較來開發,請先向我們申請開通。
什麼情況選哪一個
兩者都接受文字與圖片輸入、輸出文字,且都有 1,000,000 個 token 的上下文視窗,因此主要差異在於價格與輸出空間:claude-fable-5-1 每百萬個 token 的輸入與輸出費用分別為 $10 和 $50,而 deepseek-v4.1-flash-1017 為 $0.3 和 $1.2,前者分別約為後者的 33 倍和 42 倍;deepseek-v4.1-flash-1017 的快取讀取費用為 $0.006,相較之下,claude-fable-5-1 為 $0.25。若需要結構化輸出或批次請求,或需要明確標示的知識截止日期(2026-06),可選擇 claude-fable-5-1;deepseek-v4.1-flash-1017 並未列出結構化輸出或批次請求支援。若需要大量處理或單次極長回覆,可選擇 deepseek-v4.1-flash-1017,因為它的輸出上限為 393216 個 token,相較之下,claude-fable-5-1 為 128000 個 token。
Benchmark 成績
DeepSeek V4.1 Flash (1017):供應商沒有公布 benchmark 成績。
供應商公布: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
定價
| Claude Fable 5.1 | DeepSeek V4.1 Flash (1017) | Δ | |
|---|---|---|---|
| 輸入 / 1M tokens | $10 | $0.3 | 33× |
| 輸出 / 1M tokens | $50 | $1.2 | 42× |
| 快取讀取 / 1M tokens | $0.25 | $0.006 | 42× |
| 快取寫入 | 1.25x (5m) / 2x (1h) | 不額外計費 | - |
費率取自網站建置時的即時目錄;各模型頁面都列有最新的價目。
兩者的相對位置:每 1M tokens 的輸入價格,涵蓋同一計費單位下全部 79 個聊天模型(對數尺度)
功能
| Claude Fable 5.1 | DeepSeek V4.1 Flash (1017) | |
|---|---|---|
| 工具使用 | 是 | 是 |
| 思考控制 | 一律開啟 | 是,但供應商未公布調整參數 |
| 結構化輸出 | 是 | - |
| 提示詞快取 | 顯式(由你標記前綴) | 隱式(自動) |
| 快取存活時間 | 5m default, 1h option | no fixed TTL (evicted when unused) |
| 最小快取前綴 | 1024 個 token | 未公布 |
規格
| Claude Fable 5.1 | DeepSeek V4.1 Flash (1017) | |
|---|---|---|
| 輸入模態 | 文字 圖像 | 文字 圖像 |
| 輸出模態 | 文字 | 文字 |
| 發布日期 | 2026-09-01 | 2026-10-17 |
| 知識截止日期 | 2026-06 | - |
| 上下文視窗 | 1M | 1M |
| 最大輸出 | 128K | 393K |
| 思考參數 | output_config.effort (thinking is adaptive-only and always on) | - |
| 可接受的值 | effort
| - |
| 預設值 | thinking always on (adaptive) effort
| - |
規格摘錄自各供應商的文件;供應商沒有公布的項目就直接略過,不自行推測。 完整來源: Claude Fable 5.1 · DeepSeek V4.1 Flash (1017)
同一段提示詞,兩個模型,經閘道實測
Claude Fable 5.1 通過 · 3 sentences
When we enabled reasoning, the model started generating a long chain of internal "thinking" tokens before producing each answer, and we're billed for those tokens at the same output rate even though users never see them. In practice, that hidden reasoning often runs several times longer than the visible response, so the total tokens per request roughly doubled while the number of requests stayed flat. The upside is measurably better accuracy on complex tasks, so the right conversation is whether that quality gain justifies the cost—and if not, we can restrict reasoning to the workflows that actually need it rather than turning it on globally.
輸出 186 tok 延遲 3.2 s
DeepSeek V4.1 Flash (1017) 通過 · 3 sentences
Enabling reasoning caused each request to generate additional internal reasoning tokens, which are billed like output tokens and can be several times longer than the final answer. Those extra tokens raise cost per call, and longer responses plus occasional retries pushed total usage to roughly double. We can control this with reasoning-effort limits, token budgets, caching, and spend monitoring by use case.
輸出 253 tok (+178 思考) 延遲 5.4 s
是否照指令做(剛好三句,數得出來)、語氣是否貼合對象(寫給 CFO 看),以及下方 token 計量顯示出的隱藏思考計費落差。
Claude Fable 5.1 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): cur = cur + 1 if xs[i] == xs[i - 1] else 1 best = max(best, cur) return best ``` The bug is that `cur` counts *matches between adjacent elements* rather than *elements in the run*: it starts at 0 and only increments when `xs[i] == xs[i-1]`, so a run of length k produces a count of k−1. That's why a single element returns 0 instead of 1, and why every other run also comes out one short — the "misses runs at the end" reports are the same off-by-one seen on inputs like `[1, 2, 2]`, where the trailing run of length 2 is reported as 1 (the original code does update `best` inside the loop, so end-of-list runs aren't actually skipped, just undercounted). […]
輸出 882 tok (+507 思考) 延遲 3.4 s
DeepSeek V4.1 Flash (1017) 通過 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` starts at `0` and is incremented only when two adjacent items match, so it counts equal adjacent pairs rather than run length; a run of length `k` is recorded as `k - 1`. Consequently, a single-element input returns `0`, and a run ending at the last index—especially a one-element final run—is undercounted or never counted. The fix initializes every run to length `1`, increments on a match, resets to `1` on a mismatch, updates `best` each iteration, and handles the empty input separately.
輸出 1300 tok (+1095 思考) 延遲 11.8 s
修正是否真的正確(跑得起來)、說明的資訊密度,以及在範圍明確的任務上的 token 效率。
Claude Fable 5.1 通過 · 5/5 fields, guidance null
```json { "company": "Meridian Robotics", "quarter": "Q3 (September quarter)", "revenue_usd_m": 412, "growth_pct": 11, "guidance": null } ``` Notes on judgment calls (not part of the object): - **revenue_usd_m**: The text says "412 for the topline" but never states the currency or that the figure is in millions; it's also on a constant-currency basis and prefaced with "call it," so it's approximate. If you want strict literalism, this should be `null`. - **growth_pct**: "Eleven and change" means slightly above 11%; the exact figure isn't given. - **quarter**: "September quarter" is Q3 on a calendar basis, consistent with the reference to a pending Q4 close. - **guidance**: Explicitly withheld, so `null`.
輸出 633 tok (+349 思考) 延遲 3.8 s
DeepSeek V4.1 Flash (1017) 通過 · 5/5 fields, guidance "withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11,"guidance":"withheld pending the Q4 close"}
輸出 1375 tok (+1337 思考) 延遲 12.2 s
是否遵守 schema(不自創欄位)、面對幻覺誘因的表現(題目明確不給 guidance),以及結構化輸出路徑的差異。
Claude Fable 5.1 通過 · 121 words, 0 banned, 1 question
**Introducing Cross-Provider Prompt Caching for the Gateway.** Starting today, your API gateway can cache prompts once and reuse them across OpenAI, Anthropic, Google, and any other provider you route to. Long system instructions, retrieval context, and few-shot examples are stored at the gateway layer, so switching models no longer means paying to resend the same tokens. Why send the same 8,000-token preamble to three different vendors when you could send it once? Our cache normalizes prompt segments, fingerprints them, and serves matching prefixes from memory before the request ever reaches an upstream API. Early customers report token costs falling by 30 to 60 percent on high-volume workloads, with median latency dropping alongside. Available today on all Team and Enterprise plans.
輸出 1722 tok (+1463 思考) 延遲 2.9 s
DeepSeek V4.1 Flash (1017) 通過 · 120 words, 0 banned, 1 question
Today we’re introducing Cross-Provider Prompt Cache in the API gateway. It stores identical prompt requests once and serves cached responses across supported model providers, reducing duplicate calls, latency, and spend. Teams can set cache keys by model, temperature, system prompt, and custom metadata, then choose TTLs per route or workspace. The gateway handles provider fallback while keeping cached results consistent with your policy. Is your team paying twice for the same prompt? Cross-Provider Prompt Cache helps you answer that. Configure it in the gateway dashboard, inspect hit rates by provider, and invalidate entries on demand. Existing gateway routes need no code changes; enable the feature and define your caching rules. Cross-Provider Prompt Cache is available for all API gateway customers.
輸出 2487 tok (+2335 思考) 延遲 17.1 s
是否遵守限制(字數上限、禁用詞清單、只能有一句問句)、文字風格的特徵,以及長度控制。
改一行程式碼就能在兩者之間切換
下面每個頁籤都列了這兩個模型 ID,要改的只有醒目標示的那兩行。端點、金鑰和請求格式都不變。
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-fable-5-1",
# model="deepseek-v4.1-flash-1017", # 取消這一行的註解,並把上一行註解掉
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-fable-5-1",
// model: "deepseek-v4.1-flash-1017", // 取消這一行的註解,並把上一行註解掉
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-fable-5-1",
# "model": "deepseek-v4.1-flash-1017", # 取消這一行的註解,並把上一行註解掉
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-fable-5-1",
// Model: "deepseek-v4.1-flash-1017", // 取消這一行的註解,並把上一行註解掉
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-fable-5-1")
// .model("deepseek-v4.1-flash-1017") // 取消這一行的註解,並把上一行註解掉
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));常見問題
Claude Fable 5.1 和 DeepSeek V4.1 Flash (1017) 哪個比較便宜?
以「輸入 / 1M tokens」來看,DeepSeek V4.1 Flash (1017) 比較便宜($0.3 對 $10,相差 33×)。其他項目的結果可能相反,完整價目請看上表;實際成本要看你的用量組合。
可以只串接一次,就對 Claude Fable 5.1 和 DeepSeek V4.1 Flash (1017) 做 A/B 測試嗎?
可以。兩個模型都走同一個 OpenAI 相容端點,用的也是同一把 API 金鑰,切換時只要改一行裡的模型名稱字串。你可以把一部分流量分別導到兩邊,再直接比較帳單。
Claude Fable 5.1 與 DeepSeek V4.1 Flash (1017) 支援提示詞快取嗎?
支援。兩者的快取讀取費率都低於輸入費率,所以前綴已經進快取的工作負載,實際成本會比官網價算出來的低。確切的快取讀取價格請見上方定價表。