DeepSeek V4.1 Flash (1017) vs GPT-6 Sol
언제 어떤 모델을 쓸까
명시된 사양상 두 모델의 지원 범위는 같습니다. 텍스트와 이미지를 입력받아 텍스트를 출력하며, 채팅, 비전, 코드, 추론, 도구 사용을 지원합니다. 컨텍스트 창은 각각 1000000토큰과 1050000토큰이므로, 선택 기준은 가격과 출력 특성입니다. deepseek-v4.1-flash-1017은 입력 요금이 $2 대비 $0.3으로 약 6.7배 저렴하고, 출력 요금은 $10 대비 $1.2로 약 8.3배 저렴합니다. 최대 출력은 128000토큰 대비 393216토큰이며, 캐시에서 읽는 입력 토큰 100만 개당 요금이 $0.006이므로 긴 결과를 생성하는 작업과 캐시를 많이 활용하는 파이프라인에 적합합니다. 추론을 끄는 전환 기능이 필요하거나, 지식 기준일이 2026-04로 명시된 모델을 원한다면 gpt-6-sol을 선택하세요.
벤치마크
DeepSeek V4.1 Flash (1017): 공급자가 벤치마크 점수를 공개하지 않았습니다.
공급자 공개 자료: Alibaba (Qwen) Anthropic DeepSeek Google OpenAI Z.ai
가격
| DeepSeek V4.1 Flash (1017) | GPT-6 Sol | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $0.3 | $2 | 0.15× |
| 출력 / 1M 토큰 | $1.2 | $10 | 0.12× |
| 캐시 읽기 / 1M 토큰 | $0.006 | $0.2 | 0.03× |
| 캐시 쓰기 | 별도 요금 없음 | 별도 요금 없음 | - |
빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.
가격 위치: 이 과금 단위를 쓰는 채팅 모델 79개 전체의 1M 토큰당 입력 가격(로그 스케일)
기능
| DeepSeek V4.1 Flash (1017) | GPT-6 Sol | |
|---|---|---|
| 도구 사용 | 지원 | 지원 |
| 사고 제어 | 지원(공급자가 조절 파라미터를 공개하지 않음) | 설정 가능 |
| 구조화된 출력 | - | 지원 |
| 프롬프트 캐싱 | 암시적(자동) | 암시적(자동) |
| 캐시 수명 | no fixed TTL (evicted when unused) | 5-10m, up to 1h |
| 최소 캐시 접두사 | 미공개 | 1024 토큰 |
사양
| DeepSeek V4.1 Flash (1017) | GPT-6 Sol | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-10-17 | 2026-09-22 |
| 지식 컷오프 | - | 2026-04 |
| 컨텍스트 윈도우 | 1M | 1.1M |
| 최대 출력 | 393K | 128K |
| 사고 파라미터 | - | reasoning.effort |
| 허용 값 | - | reasoning.effort
|
| 기본값 | - | medium |
사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: DeepSeek V4.1 Flash (1017) · GPT-6 Sol
같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정
DeepSeek V4.1 Flash (1017) 통과 · 3 sentences
Enabling reasoning caused each request to generate additional internal reasoning tokens, which are billed like output tokens and can be several times longer than the final answer. Those extra tokens raise cost per call, and longer responses plus occasional retries pushed total usage to roughly double. We can control this with reasoning-effort limits, token budgets, caching, and spend monitoring by use case.
출력 253 tok (+178 사고) 지연 시간 5.4 s
GPT-6 Sol 통과 · 3 sentences
Enabling reasoning made the model generate extra internal tokens to work through each request, and those tokens are billed even though users don’t see them. If request volume stayed roughly the same, more billed tokens per request could explain why the bill doubled. We should check the usage breakdown to confirm, then lower reasoning effort or limit it to tasks that need it.
출력 188 tok (+111 사고) 지연 시간 5.0 s
지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.
DeepSeek V4.1 Flash (1017) 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` starts at `0` and is incremented only when two adjacent items match, so it counts equal adjacent pairs rather than run length; a run of length `k` is recorded as `k - 1`. Consequently, a single-element input returns `0`, and a run ending at the last index—especially a one-element final run—is undercounted or never counted. The fix initializes every run to length `1`, increments on a match, resets to `1` on a mismatch, updates `best` each iteration, and handles the empty input separately.
출력 1300 tok (+1095 사고) 지연 시간 11.8 s
GPT-6 Sol 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The original `cur` counted matching *adjacent pairs*, not items, so every run was one too short—including a single-element input, which returned 0. Starting each run at 1 counts its first item, and updating `best` on every iteration ensures a run that reaches the last index is included.
출력 206 tok (+59 사고) 지연 시간 5.9 s
수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.
DeepSeek V4.1 Flash (1017) 통과 · 5/5 fields, guidance "withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11,"guidance":"withheld pending the Q4 close"}
출력 1375 tok (+1337 사고) 지연 시간 12.2 s
GPT-6 Sol 통과 · 5/5 fields, guidance "Withheld pending the Q4 close"
{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":null,"growth_pct":null,"guidance":"Withheld pending the Q4 close"}
출력 227 tok (+185 사고) 지연 시간 5.2 s
스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.
DeepSeek V4.1 Flash (1017) 통과 · 120 words, 0 banned, 1 question
Today we’re introducing Cross-Provider Prompt Cache in the API gateway. It stores identical prompt requests once and serves cached responses across supported model providers, reducing duplicate calls, latency, and spend. Teams can set cache keys by model, temperature, system prompt, and custom metadata, then choose TTLs per route or workspace. The gateway handles provider fallback while keeping cached results consistent with your policy. Is your team paying twice for the same prompt? Cross-Provider Prompt Cache helps you answer that. Configure it in the gateway dashboard, inspect hit rates by provider, and invalidate entries on demand. Existing gateway routes need no code changes; enable the feature and define your caching rules. Cross-Provider Prompt Cache is available for all API gateway customers.
출력 2487 tok (+2335 사고) 지연 시간 17.1 s
GPT-6 Sol 통과 · 120 words, 0 banned, 1 question
Today, we’re introducing cross-provider prompt caching for our API gateway, helping teams reuse repeated prompt content when routing requests among supported AI providers. The gateway identifies eligible prompt prefixes, stores cache references, and applies them to subsequent requests where provider capabilities allow. Why send the same context again if it can be reused? With fewer duplicate input tokens, applications can reduce costs and improve latency without changing how developers call the gateway. Configure caching by route, monitor hit rates and savings in your dashboard, and keep existing provider fallback rules in place. Availability and cache behavior vary by provider, so the gateway reports eligibility and usage for each request. Get started today with our documentation and test your existing workloads.
출력 586 tok (+443 사고) 지연 시간 7.7 s
제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.
코드 한 줄로 모델 전환
아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="deepseek-v4.1-flash-1017",
# model="gpt-6-sol", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "deepseek-v4.1-flash-1017",
// model: "gpt-6-sol", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "deepseek-v4.1-flash-1017",
# "model": "gpt-6-sol", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "deepseek-v4.1-flash-1017",
// Model: "gpt-6-sol", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("deepseek-v4.1-flash-1017")
// .model("gpt-6-sol") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));자주 묻는 질문
DeepSeek V4.1 Flash (1017) vs GPT-6 Sol, 어느 쪽이 더 저렴한가요?
입력 / 1M 토큰 기준으로는 DeepSeek V4.1 Flash (1017) 쪽이 더 저렴합니다($0.3 대 $2, 6.7배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.
연동을 두 번 하지 않고도 DeepSeek V4.1 Flash (1017) vs GPT-6 Sol A/B 테스트를 할 수 있나요?
네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.
DeepSeek V4.1 Flash (1017), GPT-6 Sol 모두 프롬프트 캐싱을 지원하나요?
네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.