신규 무료로 가입하고 10회 호출해 보세요. 최대 $1, 카드 등록 불필요.

DeepSeek V4.1 Flash (1017) vs GLM-5.3-Flash

vs

언제 어떤 모델을 쓸까

두 모델 모두 1,000,000토큰 컨텍스트 윈도와 텍스트·이미지 입력, 텍스트 출력을 지원합니다. 차이는 요금 구조와 최대 출력 토큰 수입니다. glm-5.3-flash는 입력 요금이 절반($0.15 대 $0.3)이고 출력 요금은 2.4배 저렴하며($0.5 대 $1.2), 동영상 입력도 지원합니다. 반면 deepseek-v4.1-flash-1017의 캐시 읽기 요금은 100만 토큰당 $0.006으로 $0.03보다 5배 저렴하고, 최대 출력 토큰 수는 163840이 아닌 393216입니다. 동영상 입력이나 캐시되지 않은 새 프롬프트의 대량 처리에는 glm-5.3-flash를 선택하세요. 캐시 재사용이 많거나 한 번에 매우 긴 출력을 생성해야 한다면 deepseek-v4.1-flash-1017을 선택하세요.

벤치마크

DeepSeek V4.1 Flash (1017): 공급자가 벤치마크 점수를 공개하지 않았습니다.

평균 상회최고 점수GLM-5.3-Flash4 / 61 / 6
DeepSeek V4.1 Flash (1017) GLM-5.3-Flash 측정된 다른 모델 다른 모델 평균 ★ 더 높은 점수를 낸 모델 없음
DeepSWE 1.1
N/A
63.4%
GDPval-AA v2 Elo · 1504-1773 Z.ai 공개 · 2026-09-04
N/A
더 높은 점수를 낸 모델 없음 1773
Humanity's Last Exam with tools
N/A
55.3%
Agents' Last Exam
N/A
26.3%

공급자 공개 자료: Alibaba (Qwen) Anthropic DeepSeek Google Moonshot OpenAI Tencent Z.ai

가격

DeepSeek V4.1 Flash (1017) GLM-5.3-Flash Δ
입력 / 1M 토큰 $0.3 $0.15 2×
출력 / 1M 토큰 $1.2 $0.5 2.4×
캐시 읽기 / 1M 토큰 $0.006 $0.03 0.2×
캐시 쓰기 별도 요금 없음 - -

빌드 시점에 실시간 카탈로그에서 가져온 요금입니다. 현재 요금은 각 모델 페이지에서 확인할 수 있습니다.

가격 위치: 이 과금 단위를 쓰는 채팅 모델 79개 전체의 1M 토큰당 입력 가격(로그 스케일)

기능

DeepSeek V4.1 Flash (1017) GLM-5.3-Flash
도구 사용 지원 지원
사고 제어 지원(공급자가 조절 파라미터를 공개하지 않음) 항상 켜짐
구조화된 출력 - 지원
프롬프트 캐싱 암시적(자동) 암시적(자동)
캐시 수명 no fixed TTL (evicted when unused) 미공개
최소 캐시 접두사 미공개 미공개

사양

DeepSeek V4.1 Flash (1017) GLM-5.3-Flash
입력 모달리티 텍스트 이미지 텍스트 이미지 동영상
출력 모달리티 텍스트 텍스트
출시일 2026-10-17 2026-08-26
컨텍스트 윈도우 1M 1M
최대 출력 393K 164K
사고 파라미터 - reasoning_effort
허용 값 -
reasoning_effort
  • low
  • high
  • max
기본값 - max

사양은 각 공급자의 문서에서 그대로 옮겨 적었습니다. 공급자가 공개하지 않은 항목은 추정해 채우지 않고 뺐습니다. 전체 출처: DeepSeek V4.1 Flash (1017) · GLM-5.3-Flash

같은 프롬프트, 두 모델: 게이트웨이를 거쳐 측정

프롬프트 Explain to a CFO, in exactly three sentences, why our LLM bill doubled after we enabled reasoning. 검증 정확히 3문장

DeepSeek V4.1 Flash (1017) 통과 · 3 sentences

Enabling reasoning caused each request to generate additional internal reasoning tokens, which are billed like output tokens and can be several times longer than the final answer. Those extra tokens raise cost per call, and longer responses plus occasional retries pushed total usage to roughly double. We can control this with reasoning-effort limits, token budgets, caching, and spend monitoring by use case.

출력 253 tok (+178 사고) 지연 시간 5.4 s

GLM-5.3-Flash 통과 · 3 sentences

Enabling reasoning means the model now generates thousands of invisible "thinking" tokens before each visible answer, and we're billed for those hidden tokens at full output rates—our most expensive tier. Since output tokens cost 3–5x more than input tokens, that hidden thinking volume compounds across every request, which is why the bill doubled rather than edged up. If the spend concerns you, the fix is straightforward: route only complex queries to reasoning models and keep simple tasks on standard ones, which can reclaim a meaningful share of that cost without losing accuracy where it matters.

출력 742 tok (+626 사고) 지연 시간 23.2 s

지시 준수(정확히 세 문장이라 셀 수 있음), 독자에 맞춘 어조(CFO 대상), 아래 토큰 미터에 드러나는 숨은 사고 토큰 과금 차이를 봅니다.

프롬프트 This function is supposed to return the longest run of consecutive equal items, but callers report it is off by one on single-element inputs and misses runs that end at the last index. Fix it and explain the bug in one paragraph. 검증 수정 후 테스트 통과

DeepSeek V4.1 Flash (1017) 통과 · 8/8 cases

```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 best = max(best, cur) return best ``` The bug is that `cur` starts at `0` and is incremented only when two adjacent items match, so it counts equal adjacent pairs rather than run length; a run of length `k` is recorded as `k - 1`. Consequently, a single-element input returns `0`, and a run ending at the last index—especially a one-element final run—is undercounted or never counted. The fix initializes every run to length `1`, increments on a match, resets to `1` on a mismatch, updates `best` each iteration, and handles the empty input separately.

출력 1300 tok (+1095 사고) 지연 시간 11.8 s

GLM-5.3-Flash 통과 · 8/8 cases

```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` **The bug:** `cur` is supposed to hold the length of the current run, but it's seeded with `0` and reset to `0` on a mismatch instead of `1` — and since the loop starts at index 1, the first element of every run never passes through the `==` branch and so never gets counted at all. That means `cur` actually holds *run length minus 1* for every run, so every run is underreported by one: a single-element input never enters the loop and returns 0 instead of 1, and a run of length n returns n − 1 (e.g., `[3, 3, 3]` returns 2). […]

출력 2462 tok (+2138 사고) 지연 시간 29.1 s

수정이 실제로 맞는지(실행되는지), 설명이 얼마나 압축적인지, 범위가 정해진 작업에서 토큰을 얼마나 효율적으로 쓰는지를 봅니다.

프롬프트 Extract a JSON object with fields {company, quarter, revenue_usd_m, growth_pct, guidance} from this text. Use null for anything not stated; add no other fields. 검증 유효한 JSON, 스키마와 정확히 일치

DeepSeek V4.1 Flash (1017) 통과 · 5/5 fields, guidance "withheld pending the Q4 close"

{"company":"Meridian Robotics","quarter":"September quarter","revenue_usd_m":412,"growth_pct":11,"guidance":"withheld pending the Q4 close"}

출력 1375 tok (+1337 사고) 지연 시간 12.2 s

GLM-5.3-Flash 통과 · 5/5 fields, guidance "Withheld pending the Q4 close"

```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending the Q4 close" } ``` Notes on judgment calls: revenue of 412 is on a constant-currency basis as stated; growth of "eleven and change" is approximated as 11 since no precise figure is given.

출력 717 tok (+616 사고) 지연 시간 9.1 s

스키마 준수(없는 필드를 지어내지 않는지), 환각을 유도하는 조건에서의 대응(guidance 값을 일부러 주지 않음), 구조화된 출력 경로의 차이를 봅니다.

프롬프트 Write a 120-word product announcement for an API gateway feature that caches prompts across providers. Forbidden words: "seamless", "unlock", "game-changer", "revolutionize", "empower". Exactly one sentence must be a question. 검증 120단어, 금지어 0개

DeepSeek V4.1 Flash (1017) 통과 · 120 words, 0 banned, 1 question

Today we’re introducing Cross-Provider Prompt Cache in the API gateway. It stores identical prompt requests once and serves cached responses across supported model providers, reducing duplicate calls, latency, and spend. Teams can set cache keys by model, temperature, system prompt, and custom metadata, then choose TTLs per route or workspace. The gateway handles provider fallback while keeping cached results consistent with your policy. Is your team paying twice for the same prompt? Cross-Provider Prompt Cache helps you answer that. Configure it in the gateway dashboard, inspect hit rates by provider, and invalidate entries on demand. Existing gateway routes need no code changes; enable the feature and define your caching rules. Cross-Provider Prompt Cache is available for all API gateway customers.

출력 2487 tok (+2335 사고) 지연 시간 17.1 s

GLM-5.3-Flash 통과 · 120 words, 0 banned, 1 question

Introducing Cross-Provider Prompt Cache, the newest feature in our API gateway. Today, teams send identical prompts to multiple LLM providers and pay full price each time. Why duplicate that work and cost? With Cross-Provider Prompt Cache, your gateway stores prompt-response pairs and serves repeated requests from cache, regardless of which provider handles the call. The result: lower latency, reduced spend, and consistent outputs across OpenAI, Anthropic, Google, and self-hosted models. Configure cache policies per route, set TTLs, and invalidate entries instantly through the dashboard or API. Built-in analytics show hit rates and savings in real time. Enable the cache with a single flag, no code changes required. Available today on all paid plans. Contact sales for enterprise volume pricing details.

출력 2095 tok (+1937 사고) 지연 시간 20.2 s

제약 준수(단어 수 제한, 금지어 목록, 의문문 하나), 문체의 특징, 길이 조절을 봅니다.

코드 한 줄로 모델 전환

아래 탭마다 두 모델 id가 모두 들어 있습니다. 바꿀 곳은 강조된 두 줄뿐이고, 엔드포인트, 키, 요청 형식은 그대로입니다.

from openai import OpenAI

client = OpenAI(
    base_url="https://synthorai.io/v1",
    api_key="sk-syn-...",
)

resp = client.chat.completions.create(
    model="deepseek-v4.1-flash-1017",
    # model="glm-5.3-flash",  # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
    messages=[{"role": "user", "content": "Summarize this diff"}],
    reasoning_effort="medium",
)
print(resp.choices[0].message.content)

API 키 받기 →

자주 묻는 질문

DeepSeek V4.1 Flash (1017) vs GLM-5.3-Flash, 어느 쪽이 더 저렴한가요?

입력 / 1M 토큰 기준으로는 GLM-5.3-Flash 쪽이 더 저렴합니다($0.15 대 $0.3, 2.0배 차이). 다른 항목에서는 반대일 수 있습니다. 전체 요금은 위 표에 있으며, 실제 비용은 사용 패턴에 따라 달라집니다.

연동을 두 번 하지 않고도 DeepSeek V4.1 Flash (1017) vs GLM-5.3-Flash A/B 테스트를 할 수 있나요?

네. 두 모델 모두 API 키 하나로 같은 OpenAI 호환 엔드포인트에서 호출합니다. 모델 문자열 한 줄만 바꾸면 전환되므로, 트래픽 일부를 각 모델로 보내 청구 금액을 직접 비교할 수 있습니다.

DeepSeek V4.1 Flash (1017), GLM-5.3-Flash 모두 프롬프트 캐싱을 지원하나요?

네. 두 모델 모두 캐시 읽기를 입력 요금보다 낮게 과금하므로, 같은 접두사를 반복해 쓰는 워크로드는 정가로 계산한 것보다 비용이 적게 듭니다. 정확한 캐시 읽기 요금은 위 가격표에 있습니다.

관련 비교

직접 측정한 자료