Claude Opus 5 vs GLM-5.3-Flash
언제 어떤 모델을 쓸까
두 모델 모두 1,000,000 토큰 컨텍스트 윈도우를 공유하므로, 차이점은 비용과 입력에 있습니다: claude-opus-5의 비용은 백만 입력당 $5, 백만 출력당 $25로 glm-5.3-flash의 $0.15 및 $0.5 대비 각각 약 33x 및 50x 수준이며, 단순한 답변을 원할 때 thinking 모드를 끌 수 있습니다. 대용량 롱 컨텍스트 작업, 텍스트 및 이미지와 함께 비디오 입력이 필요한 경우, 그리고 더 큰 163,840 토큰 최대 출력을 원한다면 glm-5.3-flash를 선택하고; 제어 가능한 thinking 기능이 있는 Anthropic의 2026-07-24 추론 및 도구 사용 모델을 원하며 더 높은 요금표를 감수할 수 있다면 claude-opus-5를 선택하세요.
벤치마크
벤더 공개: Alibaba (Qwen) Anthropic ByteDance DeepSeek Google MiniMax Moonshot OpenAI Tencent Z.ai
가격
| Claude Opus 5 | GLM-5.3-Flash | Δ | |
|---|---|---|---|
| 입력 / 1M 토큰 | $5 | $0.15 | 33× |
| 출력 / 1M 토큰 | $25 | $0.5 | 50× |
| 캐시 읽기 / 1M 토큰 | $0.5 | $0.03 | 17× |
| 캐시 쓰기 | 1.25x (5m) / 2x (1h) | - | - |
빌드 시점의 라이브 카탈로그 요금입니다. 각 모델 페이지에 현재 요금표가 표시됩니다.
현재 위치 - 이 청구 단위를 사용하는 모든 67개의 채팅 모델 전체의 1M 토큰당 입력 가격 (로그 스케일)
기능
| Claude Opus 5 | GLM-5.3-Flash | |
|---|---|---|
| 도구 사용 | 예 | 예 |
| 사고 제어 | 설정 가능 | 항상 켜짐 |
| 구조화된 출력 | 예 | 예 |
| 프롬프트 캐싱 | 명시적 (접두사 직접 지정) | 암시적 (자동) |
| 캐시 수명 | 5m default, 1h option | 미공개 |
| 최소 캐시 접두사 | 1024 토큰 | 미공개 |
사양
| Claude Opus 5 | GLM-5.3-Flash | |
|---|---|---|
| 입력 모달리티 | 텍스트 이미지 | 텍스트 이미지 비디오 |
| 출력 모달리티 | 텍스트 | 텍스트 |
| 출시일 | 2026-07-24 | - |
| 지식 컷오프 | 2026-05 | - |
| 컨텍스트 윈도우 | 1M | 1M |
| 최대 출력 | 128K | 164K |
| Thinking 파라미터 |
| reasoning_effort |
| 허용되는 값 | thinking.type
effort
| reasoning_effort
|
| 기본값 | thinking on effort
| max |
사양은 각 공급업체의 문서를 그대로 기록한 것입니다. 공급업체가 공개하지 않은 항목은 추론하지 않고 제외했습니다. 전체 출처: Claude Opus 5 · GLM-5.3-Flash
하나의 프롬프트, 두 모델 - 게이트웨이를 통해 측정됨
Claude Opus 5 통과 · 3 sentences
When reasoning is enabled, the model generates a hidden chain of "thinking" tokens before it writes the visible answer, and those internal tokens are billed at the output rate even though no one ever sees them — commonly 3–10x more tokens than the response itself. Because output tokens are priced several times higher than input tokens, that added volume hits us at our most expensive rate, which is why the bill roughly doubled while our request count stayed flat. The spend is controllable: we can cap the reasoning budget per call, route only genuinely hard requests to reasoning mode and cheaper models for the rest, and track cost per successfully completed task rather than cost per token, since a single correct answer usually beats three cheap retries plus human cleanup.
출력 529 tok 지연 시간 9.0 s
GLM-5.3-Flash 통과 · 3 sentences
Enabling reasoning means the model now generates thousands of invisible "thinking" tokens before each visible answer, and we're billed for those hidden tokens at full output rates—our most expensive tier. Since output tokens cost 3–5x more than input tokens, that hidden thinking volume compounds across every request, which is why the bill doubled rather than edged up. If the spend concerns you, the fix is straightforward: route only complex queries to reasoning models and keep simple tasks on standard ones, which can reclaim a meaningful share of that cost without losing accuracy where it matters.
출력 742 tok (+626 추론) 지연 시간 23.2 s
지시 준수(정확히 세 문장 - 셀 수 있음), 독자 맞춤(CFO 어조), 그리고 아래 토큰 계량기가 드러내는 숨은 사고 과금 격차.
Claude Opus 5 통과 · 8/8 cases
## Fixed version ```python def longest_run(xs): if not xs: return 0 best = 1 cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 else: cur = 1 if cur > best: best = cur return best ``` ## The bug The counters were tracking the wrong quantity: `cur` counted *matching adjacent pairs* rather than *elements in the current run*, and both counters started at `0` instead of `1`. Since a run of length *n* contains only *n − 1* adjacent equal pairs, every result came back one too small — `[1, 1]` returned 1, `[3, 3, 3]` returned 2 — and a single-element list returned 0 because the loop body never executed and `best` kept its initial value of `0`. […]
출력 1094 tok 지연 시간 16.1 s
GLM-5.3-Flash 통과 · 8/8 cases
```python def longest_run(xs): if not xs: return 0 best = cur = 1 for i in range(1, len(xs)): if xs[i] == xs[i - 1]: cur += 1 best = max(best, cur) else: cur = 1 return best ``` **The bug:** `cur` is supposed to hold the length of the current run, but it's seeded with `0` and reset to `0` on a mismatch instead of `1` — and since the loop starts at index 1, the first element of every run never passes through the `==` branch and so never gets counted at all. That means `cur` actually holds *run length minus 1* for every run, so every run is underreported by one: a single-element input never enters the loop and returns 0 instead of 1, and a run of length n returns n − 1 (e.g., `[3, 3, 3]` returns 2). […]
출력 2462 tok (+2138 추론) 지연 시간 29.1 s
수정이 실제로 옳은지(실행 가능한지), 설명의 밀도, 그리고 범위가 정해진 작업에서의 토큰 효율.
Claude Opus 5 통과 · 5/5 fields, guidance "Withheld pending Q4 close"
```json { "company": "Meridian Robotics", "quarter": "Q3", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending Q4 close" } ``` Notes on judgment calls: - **quarter**: "September quarter" is labeled Q3 because the text refers to an upcoming "Q4 close," implying a calendar-aligned fiscal year. No fiscal year is given. - **revenue_usd_m**: 412 is stated as constant-currency and hedged ("call it"), so it's approximate; the currency is not explicitly stated as USD. - **growth_pct**: "up eleven and change" means slightly more than 11, so 11 is a floor rather than an exact figure.
출력 539 tok 지연 시간 7.6 s
GLM-5.3-Flash 통과 · 5/5 fields, guidance "Withheld pending the Q4 close"
```json { "company": "Meridian Robotics", "quarter": "September quarter", "revenue_usd_m": 412, "growth_pct": 11, "guidance": "Withheld pending the Q4 close" } ``` Notes on judgment calls: revenue of 412 is on a constant-currency basis as stated; growth of "eleven and change" is approximated as 11 since no precise figure is given.
출력 717 tok (+616 추론) 지연 시간 9.1 s
스키마 준수(없는 필드를 지어내지 않기), 환각 압력(guidance는 명시적으로 보류됨), 그리고 구조화 출력 경로의 차이.
Claude Opus 5 통과 · 123 words, 0 banned, 1 question
**Cross-Provider Prompt Caching** We're introducing Cross-Provider Prompt Caching in the API Gateway. Repeated system prompts, long documents, and few-shot examples are stored once at the gateway layer and reused across OpenAI, Anthropic, Google, and self-hosted models. Instead of paying full input token costs on every request, your application sends a cache reference, and the gateway rehydrates the context before forwarding it downstream. Why does that matter? Teams running high-volume agents and retrieval pipelines typically see input token spend fall 40 to 70 percent, with median latency dropping by several hundred milliseconds. Caches are scoped per project, encrypted at rest, and invalidated automatically when a prompt template changes. Enable it with a single header, and see the docs for TTL tuning and per-route controls.
출력 1593 tok 지연 시간 19.1 s
GLM-5.3-Flash 통과 · 120 words, 0 banned, 1 question
Introducing Cross-Provider Prompt Cache, the newest feature in our API gateway. Today, teams send identical prompts to multiple LLM providers and pay full price each time. Why duplicate that work and cost? With Cross-Provider Prompt Cache, your gateway stores prompt-response pairs and serves repeated requests from cache, regardless of which provider handles the call. The result: lower latency, reduced spend, and consistent outputs across OpenAI, Anthropic, Google, and self-hosted models. Configure cache policies per route, set TTLs, and invalidate entries instantly through the dashboard or API. Built-in analytics show hit rates and savings in real time. Enable the cache with a single flag, no code changes required. Available today on all paid plans. Contact sales for enterprise volume pricing details.
출력 2095 tok (+1937 추론) 지연 시간 20.2 s
제약 준수(단어 예산, 금지어 목록, 단 하나의 의문문), 문체 지문, 그리고 길이 제어.
코드 한 줄로 모델 전환
두 id는 아래의 모든 탭에 있습니다 - 강조 표시된 두 줄이 유일한 수정 사항입니다. 동일한 엔드포인트, 동일한 키, 동일한 요청 형태입니다.
from openai import OpenAI
client = OpenAI(
base_url="https://synthorai.io/v1",
api_key="sk-syn-...",
)
resp = client.chat.completions.create(
model="claude-opus-5",
# model="glm-5.3-flash", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages=[{"role": "user", "content": "Summarize this diff"}],
reasoning_effort="medium",
)
print(resp.choices[0].message.content)import OpenAI from "openai";
const client = new OpenAI({
baseURL: "https://synthorai.io/v1",
apiKey: "sk-syn-...",
});
const resp = await client.chat.completions.create({
model: "claude-opus-5",
// model: "glm-5.3-flash", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
messages: [{ role: "user", content: "Summarize this diff" }],
reasoning_effort: "medium",
});
console.log(resp.choices[0].message.content);curl https://synthorai.io/v1/chat/completions \
-H "Authorization: Bearer sk-syn-..." \
-H "Content-Type: application/json" \
-d '{
"model": "claude-opus-5",
# "model": "glm-5.3-flash", # 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
"messages": [{"role": "user", "content": "Hello"}],
"reasoning_effort": "medium"
}'package main
import (
"context"
"fmt"
"github.com/openai/openai-go/v3"
"github.com/openai/openai-go/v3/option"
)
func main() {
client := openai.NewClient(
option.WithBaseURL("https://synthorai.io/v1"),
option.WithAPIKey("sk-syn-..."),
)
resp, _ := client.Chat.Completions.New(context.TODO(), openai.ChatCompletionNewParams{
Model: "claude-opus-5",
// Model: "glm-5.3-flash", // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
Messages: []openai.ChatCompletionMessageParamUnion{
openai.UserMessage("Summarize this diff"),
},
ReasoningEffort: openai.ReasoningEffortMedium,
})
fmt.Println(resp.Choices[0].Message.Content)
}import com.openai.client.OpenAIClient;
import com.openai.client.okhttp.OpenAIOkHttpClient;
import com.openai.models.chat.completions.*;
import com.openai.models.ReasoningEffort;
OpenAIClient client = OpenAIOkHttpClient.builder()
.baseUrl("https://synthorai.io/v1")
.apiKey("sk-syn-...")
.build();
ChatCompletion resp = client.chat().completions().create(
ChatCompletionCreateParams.builder()
.model("claude-opus-5")
// .model("glm-5.3-flash") // 이 줄의 주석을 해제하고, 윗줄을 주석 처리하세요
.addUserMessage("Summarize this diff")
.reasoningEffort(ReasoningEffort.MEDIUM)
.build());
System.out.println(resp.choices().get(0).message().content().orElse(""));FAQ
Claude Opus 5와(과) GLM-5.3-Flash 중 어느 것이 더 저렴한가요?
입력 / 1m 토큰 항목에서는 GLM-5.3-Flash이(가) 더 저렴합니다($0.15 대 $5, 33× 차이). 다른 항목에서는 결과가 다를 수 있습니다 - 위의 표에 전체 정보가 있으며, 실제 비용은 사용 조합에 따라 달라집니다.
두 번의 연동 과정 없이 Claude Opus 5와(과) GLM-5.3-Flash를 A/B 테스트할 수 있나요?
네. 둘 다 하나의 API 키를 사용하여 동일한 OpenAI 호환 엔드포인트를 통해 제공됩니다 - 모델 문자열을 한 줄만 변경하면 전환되므로, 트래픽의 일부를 각각 라우팅하여 요금을 직접 비교할 수 있습니다.
Claude Opus 5 및 GLM-5.3-Flash는 프롬프트 캐싱을 지원하나요?
네 - 두 모델 모두 캐시 읽기에 대해 입력 요금보다 낮게 청구하므로, 웜 프리픽스 워크로드는 공시된 요금보다 비용이 적게 듭니다. 정확한 캐시 읽기 행은 위의 가격표에 있습니다.